v1.0.6A		17-Oct-2015 - Vincent coen
		1. Amended mbmon.c and mbsetup.c to reflect new hosting
		for the sources etc at www.sourceforge.net.
		2. Other very minor cosmetics.
		3. Aded new doc directory and manual.

v1.0.6		03-Aug-2015 - Andrew Leary

		1.  Added support for specifying a literal IPv6 address
		encased in square brackets for a node.  Previously, IPv6 was
		only supported for nodes having an AAAA record for their
		hostname in DNS.
		2.  The BBS now allows alphanumeric and punctuation
		characters in user passwords.  Previously, only alphanumeric
		characters were permitted.  
		3.  Several minor grammar and punctuation corrections.

v1.0.5          02-Nov-2014 - Andrew Leary (Never officially released)

		1.  Adjusted mbcico's .flo file logic to support a space
		character as the first character of the .flo file line. 
		This character indicates that the file named in the
		remainder of the line should be sent to the remote system. 
		This is needed to allow transmitting filenames that start
		with .flo file reserved characters such as ^, #, -, or @.
		2.  Worked on increasing reliability of Binkp NR mode.  It
		is strongly recommended that CRC mode be enabled for any
		node which NR mode is enabled for.

v1.0.4		03-Sep-2014 - Andrew Leary

		1. Reverted Vince Coen's packaging changes until an upgrade
		script can be written and tested.
		2. Added Binkp CRC support (FSP-1020) to mbcico.
		3. Changed the No Binkp/1.1 setting for nodes to be
		effective on outbound calls only.  It was causing issues
		with other mailers (including BinkD) on inbound calls,
		because mbcico was reporting binkp/1.1 in the VER string and
		then downshifting to binkp/1.0.
		4. Updated the Internet Rex binkp/1.1 bug workaround to
		reflect that versions 2.31 and 2.67 are also affected.

v1.0.3		13-Jun-2014 - Vincent Coen

		1. Changed unix/mbuseradd.c
		Added extra arg to useradd -p 12345 to avoid a locked
		record under Mageia v4 that prevents the password
		adding a record due to a file busy may be: Lets see.
		No it is not so reverted back.

		2. Still looking for cause of bug.

v1.0.2		14-Mar-2014 - Vincent Coen

		Changed packaging to use /home/mbse instead of /opt/mbse
		to suit users with a seperate / and a /home partitions.

		IT DOES NOT CHANGE THE RESULTS FOR AN EXISTING INSTALL
		WHERE mbse & bbs users are set up to use /opt/mbse.

		YOU WILL HAVE TO DO THIS MANUALLY.
		The supplied INSTALL script has been changed.
		
		To do this you will need to change:
		1. Users mbse, bbs and all bbs users to reflect the change
		   of home directory from /opt/mbse to /home/mbse using your 
		   distro's graphic system editing tool for users or if not 
		   available use usermod via sudo etc:
		   usermod -m -d /home/mbse mbse
		   usermod -m -d /home/mbse/home/bbs bbs
		   usermod -m -d /home/mbse/home/user-name bbs user-name
		   
		   Note that the '-m' option in usermod option is to move the
		   contents from the existing to the new location.
		  
		   You can see the list of bbs users by running:
		   ls -la /opt/mbse/home
		   

		2. Using your favourite editor Change 
		   /etc/services  and
		   /etc/xinetd.d/mbsebbs

		   Replacing all instances of /opt/mbse  with
		   			      /home/mbse

		3. Now do the same with http and ftp config files in
		   /etc/httpd/conf/httpd.conf and
		   /etc/proftpd/proftpd.conf (or whatever ftp & web service
		   you use.

		4. Having installed/upgraded the mbse system you must
		   reboot the system or stop and start mbse, xinetd, ftp,
		   httpd etc
		   services. It is easier just shuting down and starting
		   the system.

		5. As su run cp -ap /opt/mbse /home

		6. If not already done so, build the system using the usual
		   ./configure & make and now run make install as su or if
		   not available do, sudo bash then su then make install

		7. Change all crontab processes that deal with mbse both as
		   user mbse and root to reflect new directory using:
		   crontab -l to see what is current and then as crontab -e
		   to edit.

		8. After rebooting the system check everything is working
		   Then I would suggest renaming /opt/mbse say from /opt/mbse
		   /opt/old-mbse and leave it a few days before deleting when
		   you are SURE that all is working.

		9. Now when you change the /boot partition or install a new
		   version of your distro you can continue to use your /home
		   as is but do not forget to recreate the crontab, xinetd, 
		   rc.d/init.d/mbseb etc as needed by using cp -vp from the
		   old partition to the new or failing that create a modified
		   version of SETUP.sh as needed and run it.

		...........NOW READ THE ABOVE, AGAIN..................

	lib/
	libmbse.a:
		Replaced ftscprod.014 with ftscprod.016


v1.0.1		Dec 2013 - Vincent Coen	

	lib/
	libmbse.a:
		Fixed packaging and compiling the correct ftscprod
		file to ftscprod.014.

v1.0.0		Dec 2013?
		This is the last version of mbsebbs submitted by me,
		Michiel.

	libmbse.a:
		Updated to ftscprod.012.


v0.95.15	26-Dec-2012

	mblogin:
		Logs to facility LOG_AUTHPRIV instead of LOG_AUTH.

	mbuseradd:
		Logs to facility LOG_AUTHPRIV instead of LOG_AUTH.

	mbpasswd:
		Logs to facility LOG_AUTHPRIV instead of LOG_AUTH.


v0.95.14	01-Dec-2011

	general:
		Fixed the main manual html page.


v0.95.13	08-Aug-2011

	general:
		Added support for Arch Linux.
		Added some IPv6 configurations to the manual.
		Changed META description lines in the manual.
		Fixed a six year old documentation error.
		All manual pages have only the .html extention.

	mbfile:
		Each html file index page now has an unique name to help
		search engines.


v0.95.12	22-May-2011

	general:
		Removed several compiler warnings.
		Added invisible markers in the html manual.

	mbselib:
		The virus stream scanner can now uses IPv4 and/or IPv6 to
		connect to the clamav server and can use server clusters too.
		Connect smtp, pop3 and nntp upgraded to IPv4 and IPv6 use.

	mbcico:
		Can accept both IPv6 and IPv4 calls.
		Can call IPv4 and IPv6 nodes.

	mbtask:
		Upgraded the ping function to newer system calls. Note that
		for now I leave the interbbs chat IPv4 only.

	mblogin:
		Don't use gethostbyname function.


v0.95.11	14-Jan-2011 (patches by Scott Street).

	mbselib:
		Fixed memory corruption error in mbnntp.
		Added sysop in nodelist search function.

	mbsebbs:
		Fixed several (possible) buffer overflows, some serious ones.
		Added lookup sysop in nodelist for netmail messages.

	mbtask:
		Fixed several (possible) buffer overflows.

	lang:
		Added language prompts 480 and 481.


v0.95.10       26-Aug-2010 (released by Vince Coen).

	mbsetup:
		Minor cosmetic errors eg, inormation (information) etc in site
		docs & update copyright dates for m_global.c & ledit.c.

	mbout:
		Check that when using file attach mode that path is absolute
		eg, starts with '/' ('~/ is changed to '/opt/mbse/ etc)


v0.95.7/8      12-Jul-2010 (released by Vince Coen).

	general:
		Cosmetics and exp. code.
		And a few others I don't remember.

	NOTE:   I am incrementing the version minor number for every build as
		mbse does not use build number.


v0.95.6		04-Oct-2009

	general:
		This may need more patches for Ubuntu 9.10.

	mbfido:
		Patch to compile on Ubuntu 9.10.

	hatch:
		Patch to compile on Ubuntu 9.10.


v0.95.5		29-Nov-2008 - 04-Oct-2009

	upgrade:
		Start mbsetup, enter global setup, leave and save.

	mbselib:
		Newsservers can be connected with a port number from the
		setup.

	mbfido:
		Fixed a possible array subscript overflow.

	mbaff:
		Fixed a possible array subscript overflow.

	mbfile:
		Fixed a possible array subscript overflow.

	mbsetup:
		In screen 1.12 a nntp port number can be set.
		Added a switch to force authentication on connect with nntp
		servers.

	examples:
		Added German menus and textfiles, written by Niels Haedecke.


v0.95.4		31-Aug-2008 - 29-Nov-2008

	upgrade:
		Start mbsetup, enter global menu, leave and save.

	mbnntp:
		A cosmetic change to add an extra newline before the tearline.

	mbfido:
		A cosmetic change to add an extra newline before the tearline.

	mbsebbs:
		Fixed a buffer overflow in lastcallers display.

	mbsetup:
		Increased the size of the nntp username and password fields to
		32 characters.

	script:
		installinit.sh now knows about Slamd64.
		SETUP.sh now knows about Slamd64.


v0.95.3		12-Mar-2008 - 31-Aug-2008.

	mbfido:
		Fixed another buffer overflow thanks someone who is using a
		tic processor that doesn't follow specs and doesn't create
		proper ticfiles.


v0.95.2		17-Feb-2008 - 12-Mar-2008.

	mbselib.h:
		Added stream scanning for F-Prot.

	mbfido:
		Fixed missing SEENBY entry of our own aka if a echomail
		message came from another zone.

	mbsetup:
		Fixed chapter numbering in the ascii sitedoc.

	script:
		Fixed hatch script to send File line. Note: you must manually
		install hatch.new to hatch in the bin directory and set the
		password again, this script will not automatic install.

	mbtask:
		Call setprgp is not fatal if it fails.


v0.95.1		07-Jan-2008 - 17-Feb-2008.

	upgrade:
		Start mbsetup and exit. If you have a clamd running on some
		server (or bbs machine), you can switch to use stream
		scanning. See the manual for details.

	mbselib.h:
		Added file virscan function.
		Added stream scanning for ClamAV, scanning is 10 times faster
		compared to the commandline scanner.
		Don't log errors if execute unzip returned error 11.

	mbtask:
		Added last changes for MIB counters.

	mbfido:
		Changed error message on the news gate.
		Switched to virus scanner from library.

	mbfile:
		Switched to virus scanner from library.

	mbsebbs:
		Added MIB counters.
		Switched to virus scanner from library.

	mbsetup:
		Added support for TCP stream scanners.

	script:
		Added support for Zenwalk.


v0.95.0		25-Nov-2007 - 07-Jan-2008

	mbcico:
		The maximum speed to show to the other end is now 4294976295.

	mbsetup:
		Changed the maximum linespeed to display for TCP/IP sessions to
		4294976295. Numbers above 2147483647 might display on remote
		systems as negative numbers.

