2003-01-22 19:22:32 +00:00
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN">
< html >
< head >
<!-- $Id$ -->
< meta http-equiv = "Content-Type" content = "text/html; charset=iso-8859-1" >
< meta http-equiv = "Content-Style-Type" content = "text/css" >
< meta name = "GENERATOR" content = "vi handcraft" >
< meta name = "author" lang = "en" content = "Michiel Broek" >
< meta name = "description" lang = "en" content = "MBSE BBS Manual" >
< meta name = "keywords" lang = "en" content = "MBSE BBS, MBSE, BBS, manual, fido, fidonet, gateway, tosser, mail, tic, mailer" >
< title > MBSE BBS FAQ & Howto< / title >
< link rel = "stylesheet" href = "manual.css" >
< / head >
< body >
< blockquote >
< div align = "Center" >
< h1 > MBSE BBS FAQ and Howto.< / h1 >
< / div >
< div align = "Right" >
< h5 > Last updated 22-Jan-2003< / h5 >
< / div >
< pre >
Authors: P.E. Kimble aka King Kimerud kimerud@bayhaus.org
Michiel Broek 2:280/2802
Rick van Ruth 3:640/954
David Gonzalez 4:930/1
< / pre > < hr >
< h3 > Introduction< / h3 >
< p > This FAQ is a work in progress. It is not complete, nor does its author
claim that it is complete. This FAQ only answers questions pertaining to
using MBSE BBS on your Linux box. It is a compilation of previous questions
that Michiel Broek has recieved and answered from us newbies in getting
MBSE up & running. < / p >
< ol >
< li > < a name = "_Installation" > < / a >
< a href = "#1" > Installation< / a >
< / li >
< ol >
< li > < a href = "#1.1" > Why do I have to install MBSE in the /opt directory?< / a >
< / li >
< li > < a href = "#1.2" > What other operating systems will MBSE run on?< / a >
< / li >
< li > < a href = "#1.3" > Will MBSE ever be ported to DOS/Windows or OS/2?< / a >
< / li >
< li > < a href = "#1.4" > What does the quest switch in the bbs user setup
mean?< / a >
< / li >
< li > < a href = "#1.5" > How do I monitor as the things happen?< / a >
< / li >
< li > < a href = "#1.6" > How do I start mbsebbs from inetd or xinetd?< / a >
< / li >
< li > < a href = "#1.7" > I just installed mbse, now I get a Socket send
failed error 2< / a >
< / li >
< / ol >
< p > < / p >
< li > < a name = "_Fidosetup" > < / a >
< a href = "#2" > Fidonet Setup< / a >
< / li >
< ol >
< li > < a href = "#2.1" > The nodelist compiler crashes, why?< / a >
< / li >
< li > < a href = "#2.2" > What is the purpose of the "Comment" line in the
tic area setup?< / a >
< / li >
< li > < a href = "#2.3" > How do I poll a node?< / a >
< / li >
< li > < a href = "#2.4" > I created a filerequest but mbcico doesn't call
out.< / a >
< / li >
< li > < a href = "#2.5" > Does MBSE support fidonet via ftp feeds?< / a >
< / li >
< li > < a href = "#2.6" > The tosser and mbmsg program are slow, why?< / a >
< / li >
< li > < a href = "#2.7" > How can I use an external netmail tracker with MBSE?< / a >
< / li >
< li > < a href = "#2.8" > I am having problems with dates when unarchiving
.arc files.< / a >
< / li >
< / ol >
< p > < / p >
< li > < a name = "_Inetsetup" > < / a >
< a href = "#3" > Internet Setup< / a >
< / li >
< ol >
< li > < a href = "#3.1" > Posting newsmessages to the newsserver fails.< / a >
< / li >
< li > < a href = "#3.2" > FTP fidonet feeds how-to.< / a >
< / li >
< li > < a href = "#3.3" > Polling a internet node fails< / a >
< / li >
< li > < a href = "#3.4" > Dialup script examples for MBSE< / a >
< / li >
< / ol >
< p > < / p >
< li > < a name = "_BBSsetup" > < / a >
< a href = "#4" > BBS Setup< / a >
< / li >
< ol >
< li > < a href = "#4.1" > How do I to set up MBSE for ISDN?< / a >
< / li >
< li > < a href = "#4.2" > How do I use GoldED together with MBSE?< / a >
< / li >
< li > < a href = "#4.3" > How do I use MsgEd together with MBSE?< / a >
< / li >
< / ol >
< p > < / p >
< li > < a name = "_Doors" > < / a >
< a href = "#5" > Doors Setup< / a >
< / li >
< ol >
< li > < a href = "#5.1" > How do I run DOS doors under MBSE BBS?< / a >
< / li >
< li > < a href = "#5.2" > Dosemu compile tips< / a >
< / li >
< li > < a href = "#5.3" > Setting up for InterBBS games.< / a >
< / li >
< li > < a href = "#5.4" > Door Maintenance.< / a >
< / li >
< / ol >
< / ol >
< a href = "index.htm" > < img src = "images/b_arrow.gif" alt = "Back" border = "0" >
Go Back< / a >
< hr >
< h3 > < a name = "1" > 1. Installation.< / a >
< / h3 >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.1" > Q 1.1< / a >
< / td >
< td > Why do I have to install MBSE in the /opt directory?< / td >
< / tr >
< tr >
< td valign = "Top" > A 1.1< / td >
< td > The /opt is for extra applications, when mbse is installed there
it is easier to upgrade the OS. If you insist on installing in /usr/local
the choose /usr/local/mbse. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.2" > Q 1.2< / a >
< / td >
< td > What other operating systems will MBSE run on? < / td >
< / tr >
< tr >
< td valign = "Top" > A 1.2< / td >
< td > Currently only on most Linux distributions, FreeBSD and NetBSD.
The author, Michiel Broek, has made a valiant effort ensuring that
MBSE will recognize and install on the major distributions of Linux.
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.3" > Q 1.3< / a >
< / td >
< td > Will MBSE BBS ever be ported to DOS/Windows or OS/2? < / td >
< / tr >
< tr >
< td valign = "Top" > A 1.3< / td >
< td > No. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.4" > Q 1.4< / a >
< / td >
< td > What does the guest switch in BBS user setup mean? < / td >
< / tr >
< tr >
< td valign = "Top" > A 1.4< / td >
< td > Nothing yet. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.5" > Q 1.5< / a >
< / td >
< td > How do I monitor as the things happen? < / td >
< / tr >
< tr >
< td valign = "Top" > A 1.5< / td >
< td > tail -f /opt/mbse/log/system.log or start mbmon. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.6" > Q 1.6< / a >
< / td >
< td > How to start mbsebbs from inetd or xinetd? < / td >
< / tr >
< tr >
< td valign = "Top" > A 1.6< / td >
< td > This is described in the documentation of the < a href = "programs/mblogin.html" >
mblogin< / a >
program. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "1.7" > Q 1.7< / a >
< / td >
< td > I just installed mbse, now I get a Socket send failed error
2. < / td >
< / tr >
< tr >
< td valign = "Top" > A 1.7< / td >
< td > With a normal system boot the < b > mbtask< / b > daemon will be started
by one of the systems init scripts. If you just installed mbse you need
to do this for the first time manually. As user < b > mbse< / b > issue the
following commands:
< pre > mbtask< br > mbstat open< br > < br > < / pre >
This will start the daemon, the daemon creates the default
databases. Then you can use < b > mbsetup< / b > to configure your new system.
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Installation" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< hr >
< h3 > < a name = "2" > 2. Fidonet setup.< / a >
< / h3 >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.1" > Q 2.1< / a >
< / td >
< td > The nodelist compiler crashes, why? < / td >
< / tr >
< tr >
< td valign = "Top" > A 2.1< / td >
< td > Note: From previous experience, it is vital that you follow
the docs closely. Also, ensure that you have a copy of a valid nodelist
and nodediff file. I have ran into problems where either the noddiffs
don't match the nodelist, the crc checks fail, or I have files from
two different zones. I have even had to back up several months before
finding a valid noddiff that would match the nodelist. < br >
Make sure the domain translations do exist, with mbsetup enter
menu 17 and save it even if you didn't change anything. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.2" > Q 2.2< / a >
< / td >
< td > What is the purpose of the "Comment" line in the tic area setup?
< / td >
< / tr >
< tr >
< td valign = "Top" > A 2.2< / td >
< td > The downlinks will see this when receiving FileMgr replies.
It is meant only as a description for the filearea. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.3" > Q 2.3< / a >
< / td >
< td > How do I poll a node? < / td >
< / tr >
< tr >
< td valign = "Top" > A 2.3< / td >
< td > mbout poll f2802.n280.z2 < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.4" > Q 2.4< / a >
< / td >
< td > I created a filerequest but mbcico doesn't call out. < / td >
< / tr >
< tr >
< td valign = "Top" > A 2.4< / td >
< td > You need to add a poll for that node to do the call. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.5" > Q 2.5< / a >
< / td >
< td > Does MBSE support fidonet via ftp transfers? < / td >
< / tr >
< tr >
< td valign = "Top" > A 2.5< / td >
< td > Yes, but only the passive side. < a href = "#3.2" > Refer to 3.2.< / a >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.6" > Q 2.6< / a >
< / td >
< td > The tosser and mbmsg programs are slow, why?< / td >
< / tr >
< tr >
< td valign = "Top" > A 2.6< / td >
< td > Tossing mail and linking message areas are background tasks.
When mbse was first developed the hardware was not fast enough to run
these programs at full speed. The mailer could give CRC errors and the
bbs seemed to stop now and then. To overcome this problem all programs
started with the -quiet switch (background jobs) are stopping for short
periods so that they would use less system resources. Systems with SCSI
disks or other fast and well designed machines don't have a need for that
slowdown. In mbsetup menu 1.5.17 is the setting for the speed of all utility
programs, the default is slow. You might try this set to fast and see what
happens on your system. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.7" > Q 2.7< / a >
< / td >
< td > How can I use an external netmail tracker with MBSE?< / td >
< / tr >
< tr >
< td valign = "Top" > A 2.7< / td >
< td > If the netmail tracker can work on .pkt files you could try to
install it into mbfido. It can call a external program to process incoming
.pkt files before mbfido does something with it. That option was built a
few years ago for extra Y2K checks. (The pktdate program of Tobias Ernest).
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "2.8" > Q 2.8< / a >
< / td >
< td > I am having problems with dates when unarchiving .arc files.< / td >
< / tr >
< tr >
< td valign = "Top" > A 2.8< / td >
< td > If you are experiencing a problem with the dates on arc files
showing as January 1970 or similar when extracted using Arc v5.31 for linux
then obtain "nomarch". MBSE will detect nomarch during configuration/install
and set your archiver.data file accordingly. Nomarch extracts .arc files
and keeps the original file date. < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Fidosetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< hr >
< h3 > < a name = "3" > 3. Internet setup.< / a >
< / h3 >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "3.1" > Q 3.1< / a >
< / td >
< td > Posting newsmessages to the newsserver fails. < / td >
< / tr >
< tr >
< td valign = "Top" > A 3.1< / td >
< td > Check if you need the "mode reader" command for the newsserver.
Set this flag in mbsetup 1.15.5 < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Inetsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "3.2" > Q 3.2< / a >
< / td >
< td > How do I configure MBSE for my ftp filenet feeds? < / td >
< / tr >
< tr >
< td valign = "Top" > A 3.2< / td >
< td > Follow the next steps to setup your system for FTP clients.
< ol >
< li > As root, add a new group to your system: < b > groupadd bbsftp< / b >
. < / li >
< li > Make sure there is a directory /opt/mbse/var/bbsftp. This directory
should be owned by mbse, group bbs and have mode 0775. < / li >
< li > Add an invalid shell to /etc/shells, /usr/bin/false is good.
< / li >
< li > Install an FTP server, the examples here are for ProFTPD.
< / li >
< li > In /etc/proftpd.conf make sure there are the following lines:
< pre > # Anonymous ftp and members of group bbsftp have a chroot environment.< br > DefaultRoot ~ bbsftp< br > < / pre >
This will make sure that users who are member of the bbsftp
group have a chrooted directory structure for their ftp directories.
Also make sure the line Umask 022 is changed to Umask 002. < / li >
< li > Add a username for the node you whish to give an FTP feed.
Use the following as root:
< pre > useradd -g bbs -G bbsftp -d /opt/mbse/var/bbsftp/username < br > -s /usr/bin/false -c "FTP Account for username" -m username< br > < / pre >
Note: this is one line! There will now be a user added and
have a home directory of /opt/mbse/var/bbsftp/username. Make sure
that directory has permission 0775 or 0770. Create in the username
directory two other directories, inbound and outbound. They must
be owned by the user and be a member of group bbs and have mode 0775.
The modes 077x are needed because the user and mbse must be able to
read and write to these directories. < / li >
< li > Try to login with ftp from some other system with the choosen
username and his password and check the changes until now. You should
not be able to escape from the directories of this user and you should
be able to upload files, download and delete files. Check also if you
uploaded a file if user mbse can delete that file and also put a file
in the users ftp directory as user mbse, and check that you can download
and delete is as ftp user. < / li >
< li > Make sure for the node you want to change there is no mail
left in the outbound. Now start mbsetup, menu 7, open the setup
of the node that will use ftp. In screen 3, items 7 and 8, set these
to Directory. Now enter screen 8, here you will setup the directory
session.
< pre >
7.8 EDIT NODE DIRECTORY SESSION
Outbound settings
1. Files path /opt/mbse/var/bbsftp/username/outbound
2. Check for lock Yes 3. Wait clear lock Yes
4. Check lockfile /opt/mbse/var/bbsftp/username/lock.bsy
5. Create lock Yes
6. Create lockfile /opt/mbse/var/bbsftp/username/lock.bsy
Inbound settings
7. Files path /opt/mbse/var/bbsftp/username/inbound
8. Check for lock Yes 9. Wait clear lock Yes
10. Check lockfile /opt/mbse/var/bbsftp/username/lock.bsy
11. Create lock Yes
12. Create lockfile /opt/mbse/var/bbsftp/username/lock.bsy
< / pre >
Save this and you are ready. < / li >
< li > A final note, since this user is in group bbs and not in the
bbs userdatabase he can never telnet to your system with this account
and get a shell. The user doesn't even have a valid shell. < / li >
< / ol >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Inetsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "3.3" > Q 3.3< / a >
< / td >
< td > Polling a internet node fails.< / td >
< / tr >
< tr >
< td valign = "Top" > A 3.3< / td >
< td > There are several reasons why mbcico refuses to call an internet
node, most problems are nodelist related. A internet node with binkp
protocol should be listed with the flags CM,IBN before mbcico will
make a call. Also, in the nodelist system name field there should
be the hosts full qualified domainname so that mbcico can get that
node's IP address. If one of these items are missing, the node will
not be called. To correct this problem there are two options, make
sure the node is listed with a dns name and proper flags in the nodelist.
The second option is to add a setup record for that node and fill in
the nodelist override fields. You can find these in menu 7.3, item
5 can be filled with the nodelist flags, ie. CM,IBN and item 6 can
be used to give that node's fdn or IP address.
< p > If the call still fails there are several things that must be
right before mbcico makes any internet call. In mbmon, screen 2 (SERVER
STATS) there are flags that indicate if the system is running, internet
is available and the bbs is open. If one of these is No, then no call will
be made. (For POTS the Internet flag does not matter of course). < / p >
< p > In mbsetup, screen 18 (taskmanager), you need to set the maximum
TCP sessions to allow. This is inbound and outbound together. So if you set
this to 3 and 3 or more systems are already calling in via internet, your
system will not call anymore until the amount of TCP sessions drops below
3.< / p >
< p > If you set this to high on an average cable/adsl connection,
you can get into trouble because you use up all upstream bandwidth. (We have
seen a lot of errors at a busy when the upstream speed was 64K and downspeed
512K and about 4 sessions together). A good rule seems 1 TCP session for
each 32K bandwidth. < / p >
< p > Then turn in that same screen debug on. After a minute mbtask
rereads his configuration.< / p >
< p > Make a poll with mbout poll < node > . < / node > < / p >
< p > Watch the mbtask logfile and see what it does for that node. It
should be added to the calllist. If not, it might be still a nodelist problem.
< / p >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Inetsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "3.4" > Q 3.4< / a >
< / td >
< td > Dialup script examples for MBSE< / td >
< / tr >
< tr >
< td valign = "Top" > A 3.4< / td >
< td > Dialup Script using mclient:
< pre > #!/bin/sh
#
# $Id$
#
# Dialup script for MBSE BBS.
#
#============================================================================
# Copyright (C) 1997-2002
#
# Michiel Broek FIDO: 2:280/2802
# Beekmansbos 10
# 1971 BV IJmuiden
# the Netherlands
#
# This file is part of MBSE BBS.
#
# This BBS is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2, or (at your option) any
# later version.
#
# MBSE BBS is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with MBSE BBS; see the file COPYING. If not, write to the Free
# Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
#============================================================================
#
#
# Enter commands to make the dialup connection and to hangup the connection.
#
DIALCMD="mclient -d -c DDS"
HANGUPCMD="mclient -k"
#
# Log to syslog
#
LOGGER="logger -p user.notice -t basename $0$$]"
if [ -z "$DIALCMD" ]; then
echo "This script is not configured, edit this script to use it."
exit 1
fi
echo "Dial internet start" | $LOGGER
#
# Do 3 attempts to connect
#
connect=0; try=0;
while let 'connect == 0'
do
# Count connect attepts
#
let try=try+1
if [ $try == 4 ]; then
echo "No internet connection, giving up" | $LOGGER
$HANGUPCMD > > /dev/null
exit 1
fi
echo "Call attempt $try" | $LOGGER
$DIALCMD > > /dev/null
i=60;
while let 'i > 0' & & let 'connect == 0'
do
if [ -f $MBSE_ROOT/sema/is_inet ]; then
connect=1
echo "mbtask detected internet" | $LOGGER
fi
let i=i-1
sleep 1
done
#
# Check if we have a connection
#
if [ ! -f $MBSE_ROOT/sema/is_inet ]; then
echo "Failed, 10 seconds pause ..." | $LOGGER
sleep 10
fi
done
#
# Here we have a connection, now make all needed polls
#
$MBSE_ROOT/bin/mbout poll f5003.n280.z2 f19.n280.z2 -quiet
#
# Now we wait until the do_inet semafore appears, we
# timeout at 25 seconds, must be enough.
#
i=25;
while let 'i > 0'
do
if [ -f $MBSE_ROOT/sema/do_inet ]; then
i=0;
else
let i=i-1;
sleep 1
echo "wait do_inet $i"
fi
done
#
# Now test until the do_inet semafore is gone.
# Timeout is one hour.
#
i=3600;
while let 'i > 0'
do
if [ ! -f $MBSE_ROOT/sema/do_inet ]; then
i=0;
else
let i=i-1;
sleep 1
echo "wait ready $i"
fi
done
echo "Internet sessions done, hangup" | $LOGGER
$HANGUPCMD > > /dev/null
echo "Script ready" | $LOGGER
exit 0
==============================================
< / pre >
Dialup Script using diald:
< pre > =================================================
#!/bin/sh
PATH=/opt/mbse:/opt/mbse/bin:/usr/bin:/usr/local/bin:/bin:/usr/sbin:/usr/local
/ sbin:$PATH
cd /opt/mbse
if [ -f /opt/mbse/tmp/ip.up ] ; then
exit
fi
echo "up" > /var/run/diald.ctl
sleep 15
ping -c 10 -w 10 mail.iol.ie
if [ -e /var/run/ppp0.pid ] ; then
touch /opt/mbse/tmp/ip.up
cd /opt/mbse
echo "Fetching News"
/opt/mbse/fetchnews
echo "Synching clock"
telnet 192.168.0.2 9049
bin/mbfido news
echo "Fetching Mail"
/usr/bin/fetchmail -f /opt/mbse/.fetchmailrc
bin/soup
if [ ! 'cat /opt/mbse/irex/s/rexbusy.0 | xargs ps --no-header' ] ;
then
rm /etc/ftn/irex/s/rexbusy.0
fi
./rexl
fetchmail -f /opt/mbse/.fetchmailrc
./rexl -sf m
/opt/mbse/bin/bink
echo down > /var/run/diald.ctl
bin/bres.sh # > > /dev/null 2> & 1
fi
rm /opt/mbse/tmp/ip.up
==================================
< / pre >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Inetsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< hr >
< h3 > < a name = "4" > 4. BBS setup.< / a >
< / h3 >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "4.1" > Q 4.1< / a >
< / td >
< td > How to set up MBSE for ISDN. < / td >
< / tr >
< tr >
< td valign = "Top" > A 4.1< / td >
< td > Contributed by: J. Beekhuizen, 2:280/1018
< p > Of course, you have to configure and build your kernel for ISDN
support and the correct drivers for your card. It is beyond the scope
of this document to explain how to do that. < / p >
< p > To your /etc/inittab file add the following lines for your ISDN
devices ttyI0 and ttyI1. < / p >
< pre > # ISDN lines< br > I1:23:respawn:/usr/local/sbin/mgetty -x 4 -i /opt/mbse/etc/issue ttyI0< br > I2:23:respawn:/usr/local/sbin/mgetty -x 4 -i /opt/mbse/etc/issue ttyI1< br > < br > < / pre >
To your mgetty.config file [/usr/local/etc/mgetty_sendfax/mgetty.config
on my system] set up the ttyI0 and ttyI1 ports. With AT& E you set
the MSN/EAZ the device should listen to. This should for an MSN be your
telephone number < b > with< / b > the area code but < b > without< / b > the leading
0. For an EAZ the last digit of your EAZ.
< p > The ISDN ports < / p >
< pre > port ttyI0< br > modem-type data< br > init-chat "" ATZ OK< br > AT& E714015437& W0 OK < br > AT& B512 OK< br > < br > port ttyI1< br > modem-type data< br > init-chat "" ATZ OK < br > AT& E714017198& W0 OK < br > AT& B512 OK< br > < / pre >
From the mbsetup menu #5 "Edit Modem types" configure the ISDN
modem type.
< pre > Modem type ISDN Linux< br > Init string ATZ\r< br > Init string< br > Init string< br > OK string OK< br > Hangup \d\p\p\p+++\d\p\p\pATH0\r< br > Info command ATI2\r< br > Dial command ATD\T\r< br > Connect CONNECT 64000< br > Connect CONNECT< br > [...]< br > Reset cmd ATZ\r< br > Error string BUSY< br > Error string NO CARRIER< br > Error string NO DIALTONE< br > Error string NO ANSWER< br > Error string RING\r< br > Error string ERROR< br > Error string< br > Error string< br > Error string< br > Error string< br > Cost offset 0< br > EMSI speed 28800 ! not relevant for ISDN< br > Strip dashes No< br > Available Yes< br > < br > < / pre >
And from #6 "Edit TTY lines info" the ISDN lines
< pre > TTY name ISDN Line 1< br > Device name ttyI0< br > Phone or DNS 31-71-4015437< br > Line speed 64 kbits< br > Fido flags CM,XA,MO,X75< br > Equipment ISDN< br > Available Yes< br > Auth. log No< br > Honor ZMH Yes< br > Callout Yes< br > Modem type ISDN Linux< br > Locked speed 0 ! not relevant for ISDN< br > EMSI name The Wizard's ISDN line 1< br > < br > TTY name ISDN Line 2< br > Device name ttyI1< br > Phone or DNS 31-71-4017198< br > Line speed 64 kbits< br > Fido flags CM,XA,MO,X75< br > Equipment ISDN< br > Available Yes< br > Auth. log No< br > Honor ZMH Yes< br > Callout Yes< br > Modem type ISDN Linux< br > Locked speed 0< br > EMSI name The Wizard's ISDN line 2< br > < br > < / pre >
T-t-that's all folks :)) < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_BBSsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "4.2" > Q 4.2< / a >
< / td >
< td > How do I use GoldED together with MBSE? < / td >
< / tr >
< tr >
< td valign = "Top" > A 4.2< / td >
< td > Since MBSE BBS version 0.33.12 GoldED and MBSE BBS can be used
together without problems as long as you use it to read the sysop mail.
The mbsetup program can export a file called /opt/mbse/etc/golded.inc
which will contain your main Aka's, Aka matching, sysop name and all your
mail areas. This file is only (re)created if you change the global settings
or one of the mail areas. The first time you must force this by making
a change somewhere.
< p > Now create /opt/mbse/etc/golded.cfg, here is what I wrote: < / p >
< pre > ; GoldED.cfg< br > ;< br > ; Internet Addressing< br > ;< br > INTERNETADDRESS Michiel_Broek@f2802.n280.z2.fidonet.org< br > INTERNETGATE UUCP 2:292/875< br > ;< br > ;< br > OUTBOUNDPATH /opt/mbse/var/bso/outbound< br > REPLYLINK chain< br > STYLECODES yes< br > ;< br > ;< br > ; MESSAGE READER< br > ;< br > DISPMSGSIZE KBYTES< br > DISPATTACHSIZE KBYTES< br > DISPLOCALHIGH YES< br > DISPPAGEBAR YES< br > VIEWHIDDEN YES< br > VIEWKLUDGE NO< br > VIEWQUOTE YES< br > ;< br > INCLUDE /opt/mbse/etc/golded.inc< br > ;< br > ; The end.< br > < br > < / pre >
Put in /opt/mbse/.profile the following line: export GOLDED=$HOME/etc
< p > When you now start GoldED you use it as the sysop. Make sure that
the sysop's userrecord is the first user in the MBSE BBS userbase. If not,
the lastread pointers are not right. The GoldED nodelist compiler can be
added to the setup in menu 18. < / p >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_BBSsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "4.3" > Q 4.3< / a >
< / td >
< td > How do I use MsgEd together with MBSE?< / td >
< / tr >
< tr >
< td valign = "Top" > A 4.3< / td >
< td > Since MBSE BBS version 0.35.05 MsgEd and MBSE BBS can be used
together without problems as long as you use it to read the sysop
mail. The mbsetup program can export a file called /opt/mbse/etc/msg.txt
which will contain your mail areas setup. This file is only
(re)created if you change the global settings or one of the mail
areas. The first time you must force this by making a change somewhere.
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_BBSsetup" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< hr >
< h3 > < a name = "5" > 5. Doors setup.< / a >
< / h3 >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "5.1" > Q 5.1< / a >
< / td >
< td > How do I run DOS doors under MBSE BBS? < / td >
< / tr >
< tr >
< td valign = "Top" > A 5.1< / td >
< td >
< pre > Written by: Redy Rodriguez, sysop of Parolas BBS 2:348/609< br > Fidonet: Redy rodriguez 2:348/609< br > Email: redy@users.sourceforge.net< br > Redy_Rodriguez@f609.n348.z2.fidospain.org< br > < / pre >
< p > < b > NO WARANTEE< / b > < / p >
< p > The information gathered here, works for the indicated intention.
It is proven and working in PAROLAS BBS, however, I do not guarantee
that it works correctly in all the cases. The author is not responsible
for the damage this can cause. If you follow the instructions, and you
get not the expected result, or as a result of it you get undesired results,
you loose data or destroy your system, you you will be the only person
in charge. < / p >
< p > < b > INTRODUCTION< / b > < / p >
< p > This document describes how I have been able to execute MS/DOS
doors in MBSEBBS. Probably it is not the best way to do it, but this
is the one that works for me. If somebody finds one more more effective,
or simpler or safer a solution, the I like to hear this solution. < / p >
< p > < b > WHAT IS NEEDED?< / b > < / p >
< p > MBSEBBS is correctly compiled and working, in my case I have the
version 0.33.19, that is at the moment the most recent and stable, I suppose
that this method can be valid for newer versions. DOSEMU 1.0.2 I have tried
previous versions, but these do not work correctly with virtual ports. You
can download dosemu.1.02.tgz from < a href = "www.dosemu.org" > www.dosemu.org< / a >
, you may also need to download the freedos archive dosemu-freedos-bin-1.02.tgz.
A partition with MS/DOS, I have on my disc a partition with installed
MS/DOS, and that is the one that I use, but I'm sure that many doors
could work correctly with the freedos. You also need < b > sudo< / b > . Sudo
is a utility that let's ordinary users execute certain programs as superuser,
this is available with almost all Linux distributions. < / p >
< p > < b > COMPILING DOSEMU< / b > < / p >
< p > Unpack dosemu in some directory, for example /usr/src, then changed
into that directory and execute 'make'. When this is ready we have
dosemu compiled. If we already had a previous version of dosemu it is
advisable to uninstall it before continuing. Copy dosemu-freedos-bin-1.02.tgz
to the toplevel directory of the dosemu source and execute: < / p >
< pre > ./install_systemwide -fd dosemu-freedos-bin-1.02.tgz< br > < br > < / pre >
In the directory etc, within the directory where we have decompressed
the source code of dosemu we have configuration examples. Create the
directory /var/lib/dosemu if it does not exist the directory, and copy
global.conf to that directory. Also copy dosemu.conf to directory /etc
and copy dosemu.users.secure as dosemu.users to /etc.
< p > < b > CONFIGURE THE DOS PARTITION< / b > < / p >
< p > Now we must configure the dos partition, in my case this exists
as a mounted dos partition in /dos/c. If this is not the case then you
could work with an image of freedos. I have created in my dos partition
a directory c:\doors where I install all doors that I want to use, and
a file called c:\doors.bat with the following contents: < / p >
< pre > @echo off< br > c:< br > cd \doors< br > if exist %1.bat call %1 %2 %3 %4 %5 %6 %7 %8 %9< br > c:\dosemu\exitemu< br > < br > < / pre >
Change to the directory /var/lib/dosemu and create directory
called for example 'c':
< pre > mkdir c. < br > < br > < / pre >
A link to the mounted partition could be made but I prefer
to create a new directory and in that directory make links to dos program
which are only of interest for us. Many programs and directories of the
dos partition are not needed in dosemu and to run doors. Change to the
created directory and make links to everything what we have in our dos
partition (we will erase soon what we do not need). Autoexec.bat and
config.sys must copied instead of making links so we can modify them, because
surely we will want that they are different in dosemu, then in real dos.
< pre > cd c< br > ln -s /dos/c/* .< br > rm autoexec.bat< br > rm config.sys< br > cp /dos/c/autoexec.bat config.sys .< br > < br > < / pre >
Create a directory dosemu and copy the typical utilities of
dosemu.
< pre > mkdir dosemu < br > cp /usr/src/dosemu-1.02/1.0.2.0/commands/* dosemu< br > < br > < / pre >
Now we modify the copy of config.sys and autoexec.bat to erase
everything what is not necessary to execute our games as doors, like
drivers for cdrom, mouse etc... We will clear the keyboard driver 'KEYB
XX' and make sure that in the path in autoexec.bat to include the directory
c:\dosemu. Also load the fossil emulator, for example add these two lines:
< pre > path %PATH%:c:\dosemu< br > c:\dosemu\fossil< br > < br > < / pre >
If there is another fossil, such as bnu or x00 in config.sys
or autoexec.bat we clear all references to these, we will load them
if that is necessary in the file that it executes the door when needed,
this can be necessary for some doors and for other not. Now we can erase
all the links to the directories who are not necessary, and that we do
not want that they are visible.
< p > Then edit the file /etc/dosemu.conf and look for the line that
begins with "$_hdimage =" and change that to: < / p >
< pre > $_hdimage = "c" < br > < br > < / pre >
Now login as root and you should be able to execute our dos
emulator by executing '/usr/bin/dosemu.bin'
< p > (to leave dosemu type in exitemu) < / p >
< p > < b > CONFIGURING SUDO< / b > < / p >
< p > Normally the dos partition is not accessible to the users of the
BBS, except from within dosemu, and to be able to have access without activating
the setuid bit of dosemu, we use sudo so that any user of the BBS can execute
dosemu.bin as root. As root execute visudo to edit the configuration file
of sudo add the lines: < / p >
< pre > %bbs ALL=NOPASSWD:/opt/mbse/bin/bbsdoor.sh< br > %bbs ALL=NOPASSWD:/opt/dosemu/bin/dosemu.bin< br > < br > < / pre >
The first command is a script that takes care of copying the
file door.sys to the dos partition, the second line is to allow to
execute dosemu.bin. Any user of group BBS can execute these commandos
like root without password is asked.
< p > In order to test that this works login as user mbse and execute:
< / p >
< pre > sudo dosemu.bin < br > < / pre >
< p > < b > INSTALLING A DOOR< / b > < / p >
< p > First we need a pair of scripts. These scripts are installed when
you did install MBSE. These scripts are needed to execute the doors and are
installed in /opt/mbse/bin: < / p >
< pre > --- rundoor.sh ---< br > < br > #!/bin/bash< br > #< br > # rundoor.sh - Never< br > call this script directly, create a symlink< br > # to this< br > file with the name of the door. For example< br > # tu run the< br > door ilord do:< br > # cd /opt/mbse/bin< br > # ln< br > -s rundoor.sh ilord< br > #< br > # by Redy Rodriguez and Michiel< br > Broek.< br > #< br > DOOR=`basename $0`< br > COMMANDO="\" doors $DOOR $*\r\""< br > < br > /usr/bin/sudo /opt/mbse/bin/bbsdoor.sh $DOOR $1< br > /usr/bin/sudo /opt/dosemu/bin/dosemu.bin \< br > -F /var/lib/dosemu/global.conf \< br > -I "`echo -e serial { com 1 virtual }"\n" keystroke $COMMANDO`"< br > reset< br > tput reset< br > stty sane< br > < br > < br > < br > --- bbsdoor.sh ---< br > #< br > # Initialize DOS environment before starting a bbs door.< br > # Parameters: $1 = name of the door< br > # $2 = the nodenumber for this session< br > #< br > # by Redy Rodriguez, 22-Oct-2001< br > < br > if [ "$1" != "" ]; then< br > if [ "$2" != "" ]; then< br > mkdir -p /dos/c/doors/node$2 > /dev/null 2> & 1< br > # Copy door.sys to dos partition< br > cat ~/door.sys > /dos/c/doors/node$2/door.sys< br > # Create .dosemu/disclaimer in user home to avoid warning< br > if [ ! -d $HOME/.dosemu ]; then< br > mkdir $HOME/.dosemu< br > fi< br > if [ ! -f $HOME/.dosemu/disclaimer ]; then< br > touch $HOME/.dosemu/disclaimer< br > fi< br > fi< br > fi< br > < br > < / pre >
The script rundoor.sh is never called directly, simply create
a link with the name of the door to this file, this name must be the
same as the one of the .bat file that starts the door in the doors directory
of the dos partition. Let me explain this with an example:
< p > I have chosen the door Virtual Sysop, but it could be any other
door. My experience says to me that not all doors work correctly with
a serial port in virtual mode. This one is working at Parolas BBS. < / p >
< p > Unpack Virtual Sysop in the dos partition, in the directory c:\doors\vsysop.
Execute as user mbse 'sudo dosemu.bin' and make sure that the door
works in local mode (these commands are for this door): < / p >
< pre > cd doors< br > cd vsysop< br > vsysop -local< br > < br > < / pre >
If everything is correct then create the file c:\doors\vsysop.bat
with the following contents:
< pre > --- vsysop.bat ---< br > @echo off< br > C:\COMUNIC\X00\X00 E B,0,57600< br > cd vsysop< br > vsysop -D c:\doors\node%1\door.sys -BBSNAME PAROLAS< br > deltree /y c:\doors\node%1< br > C:\COMUNIC\X00\X00< br > cd ..< br > < br > < / pre >
Before passing the control to dosemu, the file door.sys will
be copied to c:\doors\node???? where the ???? is the node number from
which the door is invoked (to allow that several users can execute the
door at the same time). This nodenumber also is passed as the first parameters
to the .bat file, this is to indicate to which directory to copy the door.sys
file.
< p > The Virtual Sysop door supports door.sys and that is the only
dropfile that is generated by mbsebbs and that is supported by most
of the doors. If you need another format you must use a converter to change
the format of the dropfile. < / p >
< p > I use the fossil X00, I have it installed in C:\COMUNIC\X00 and
this door works for me correctly with these parameters, it is alos possible
that it works without X00 or that you can load another fossil.
< / p >
< p > Now create a link to rundoor.sh in /opt/mbse/bin called vsysop.
The name must be the same one that the name of the .bat file created
in the dos partition, but without the extension bat. < / p >
< pre > ln -s /opt/mbse/bin/rundoor.sh /opt/mbse/bin/vsysop< br > < br > < / pre >
Now we execute mbsetup and enter the menu setup to add an entrance
like this (It puts option 16 to Yes):
< pre > 8.3. EDIT MENU ITEM< br > < br > 1. Sel. key V< br > 2. Type nr. 7 Run external program in shell< br > 3. Opt. data /opt/mbse/bin/vsysop /N< br > 1234567890123456789012345678901234567890123456789012345678901234< br > 4. Display< br > 5. Security 0 --------------------------------< br > 6. Min. age 0< br > 7. Max. lvl 0< br > 8. Password < null> 13. No door.sys No< br > 9. Credit 0 13. Y2K style No< br > 10. Lo-colors Normal display color 14. Use Comport Yes< br > 11. Hi-colors Bright display color 15. Run nosuid Yes< br > 12. Autoexec No 16. No Prompt Yes< br > < br > < / pre >
And that is everything... < / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Doors" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "5.2" > Q 5.2< / a >
< / td >
< td > Dosemu compile tips < / td >
< / tr >
< tr >
< td valign = "Top" > A 5.2< / td >
< td >
< pre > Written by: Rick Van Ruth, sysop of Vampyre's Heaven BBS 3:640/954< / pre >
Dosemu still exhibits some file locking behaviour and this needs
to be overcome, especially if you are running multinode door games. The
following information was supplied by Bob Newell of Chung Kuo BBS (telnet
chungkuo.org) and I reiterate it here.
< p > There is an issue in that Linux file locking does not map precisely
to DOS file locking. You need to patch DOSEMU and build a special version
to deal with this problem. Find the file "dosext/mfs/mfs.c" in your
DOSEMU source tree. Locate the following lines: < / p >
< pre > case DENY_ANY:< br > fl.l_type = F_RDLCK;< br > < br > Change the second line to < br > fl.l_type = !writing ? F_RDLCK : F_WRLCK;< br > < br > < / pre >
and build a new version of DOSEMU.
< p > To solve a problem of slow screen painting, locate "base/async/int.c"
in your source tree. Locate < / p >
< pre > case 0x2C:< br > < br > and just below, comment out or delete the line< br > < br > usleep(INT2F_IDLE_USECS);< br > < br > < / pre >
and rebuild your DOSEMU.< br >
< br >
It is recommended to use both tips above as it will not harm
any dos door games.< br >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Doors" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "5.3" > Q 5.3< / a >
< / td >
< td > Setting up for InterBBS games. < / td >
< / tr >
< tr >
< td valign = "Top" > A 5.3< / td >
< td >
< pre > Written by: Rick Van Ruth, sysop of Vampyre's Heaven BBS 3:640/954< / pre >
There are 2 methods for providing InterBBS setup. If your system
merely connects to one host for your games packets you need only perform
a few simple steps to have it working. If your system is a Host for InterBBS
games you will also need to add a script to separate different packets
for different downlink systems.< br >
< br >
Common to Both Methods:< br >
With most BBS games you will need 2 directories in your dos
filesystem area. One for the inbound packets and one for netmail messages
door games produce to send outbound packets.
< p > The easiest way to solve this is by creating symlinks from your
MBSE directories into the directory where your dos doors live (c:\doors).
The 2 directories you wish to link are /opt/mbse/var/inbound and /opt/mbse/var/msgs
- link them into your dos directories doors directory with the same
names ie: "inbound" and "msgs". Now according to dosemu you will have
a c:\doors\inbound and a c:\doors\msgs. We do not actually use the "msgs"
directory for anything other than a place to tell games where to write
its netmails to. These "netmails" are subsequently deleted from the system,
but the games need to be able to write them there. < / p >
< p > 1. The Easy Way - Single Host System:< br >
< / p >
< p > 1A.First of all you will realise that door games running under
dosemu usually write files as owner root, chmod 0644. This is not good
for MBSE to transfer these files as it does not have permission to act
on the files. In order to force dosemu to write games files so that MBSE
can act upon them we need to alter /etc/sudoers and change the umask for
root running under sudo. To do this open /etc/sudoers (you must be root
to edit this file) and add the following line at the top of the file before
the specifications:< / p >
< p > Defaults umask=0000< / p >
< p > This will allow dosemu to write files chmod 0666 (read/write everybody)
and MBSE will be able to manipulate them.< br >
< / p >
< p > For my example I will use the InterBBS dos door game called Barren
Realms Elite (BRE for short). < / p >
< p > 1B. Install Bre in c:\doors\bre and setup the necessary files
for its execution as a dos door from MBSE as per the dos doors faq.
< / p >
< p > 1C. Tell Bre (in its BBS.CFG) that the path for inbound packets
is c:\doors\inbound and the netmail path is c:\doors\msgs Bre will now
automatically process all inbound packets it finds in the inbound directory
for itself. It needs no assistance as it merely searches for the correct
filename in the directory.< / p >
< p > 1D. We need to link Bre's outbound path to our host nodes MBSE
mailbox for automatic transfer of games packets. First make sure you
have added an "outbox" for your uplink node in the nodes setup in MBSE
- Section 7, Select Uplink, Menu 1, Section 2 "outbox dir". eg: if your
uplink is 3:640/954 then MBSE will default to creating /opt/mbse/var/boxes/node3_640_954
as the outbox (I will use this as an example). Note the flavour of your
uplinks node connection will apply to the outbox as well. Thus if that
particular node is set crashmail then anything you put in the outbox will
also be sent crashmail.< / p >
< p > Next go to your Bre game directory. You will notice Bre has an
OUTBOUND directory, this is where it places all its game packets that
are to be sent to the uplink. We need to delete this directory and instead
create a symlink to the node outbox instead. If Bre is in c:\doors\bre
then the symlink command will be:< / p >
< p > ln -s /opt/mbse/var/boxes/node3_640_954 /dos/c/doors/bre/OUTBOUND< / p >
< p > Alter the above depending on where your linux path to your dos
is, also remember linux is case sensitive! Note you can also make as
many synlinks as you like to the nodes outbox, so if you have 2 or 3
different games you send to that node you can link the outbox to each
games outbound directory. Also if you have different games to different
host nodes just link the game outbound directories to the outboxes of each
node.< / p >
< p > Thats it. The system will now process inbound and outbound packets
automatically. You will however need to delete the netmails in the msgs
directory - I have included this in the Door game maintenance section
further on.< / p >
< p > If you experience problems with your system polling nodes and
sending the game mail packets while a user is online within the game then
you might wish to use the dos "share.exe" so packet files are not being accessed
by both the game and the mailer at the same time. You can load share.exe
within your doors.bat in dos root directory.< / p >
< p > 2. The Hard Way - Multiple Host System< / p >
< p > Follow steps 1A, 1B, 1C above, the change occurs for 1D (below).< br >
< / p >
< p > 1D. We need a script to process the Bre outbound packets and add
them to MBSE's node outboxes path so they are sent. A script on how to do
this follows (with comments ). First remember to create your outboxes for
each node that you transfer games packets to. I will use 3:640/954 as above
and 1:123/456 for this example of 2 systems linked to the one Bre game.
< / p >
< p > This script should be owned by user "mbse" and have the permissions
(chmod 755) -rwxr-xr-x. It is best kept in /opt/mbse/bin with your
dos game executing scripts. I call this script "dos_poll" < / p >
< pre > ------------------------------------------------------------------------< br > #!/usr/bin/perl -U< br > use File::Basename;< br > use File::Copy;< br > < br > < br > # Define the variables for the outboxes for our links< br > $node1 = "/opt/mbse/var/boxes/node3_640_954";< br > $node2 = "/opt/mbse/var/boxes/node1_123_456";< br > # Define the linux path to Bre's outbound directory< br > $bre_path = "/opt/mbse/dos/doors/bre/OUTBOUND";< br > < br > opendir(DIR, "$bre_path") || die;< br > @dirlist = readdir(DIR);< br > closedir(DIR);< br > < br > foreach $filename (@dirlist){< br > $brefile = "$bre_path/$filename";< br > ($filenameOnly, $pathname, $fileExtension) = fileparse($filename, '\..*');< br > < br > if($filenameOnly eq "048b0201") {< br > move("$brefile","$node1"); < br > }< br > if($filenameOnly eq "048b0203") {< br > move("$brefile","$node2"); < br > }< br > }< br > < br > # '048b0201' is the packet name Bre creates. You can find out what< br > # your packet name is by running BRE PLANETARY and then checking inside< br > # the Bre OUTBOUND directory - note no ext on name. You should also check< br > # your nodes dat for which is which 048b0201 means from system 2 to system 1< br > # so you would be system 2 in the nodes dat and 1 would be 3:640/954< br > # 048b0203 is obviously to system 3 in the nodes dat - 1:/123/456 in our< br > # example here< br > < br > ------------------------------------------------------------------------< br > < br > Thats it. You can run this 'dos_poll' script from the maintenance scripts described below.< br > < / pre >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Doors" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< p >
< table width = "100%" >
< tbody >
< tr >
< td width = "50" valign = "Top" > < a name = "5.4" > Q 5.4< / a >
< / td >
< td > Door Maintenance. < / td >
< / tr >
< tr >
< td valign = "Top" > A 5.4< / td >
< td >
< pre > Written by: Rick Van Ruth, sysop of Vampyre's Heaven BBS 3:640/954< / pre >
Ok, so you can setup doors, run inbound and outbound for interbbs
games. So how do you do maintenance? < br >
Again by scripts. Again I will use BRE as an example. First
I create a maintenance batch file in my C: root directory. I have called
it maint.bat and for the bre game it looks like this:
< pre > cd \doors\bre< br > BRE INBOUND< br > BRE SCORES< br > BRE REQUEST< br > BRE PLANETARY< br > exitemu< br > < br > < / pre >
if you are familiar with Bre you will know this to be a standard
sort of maintenance except for the "exitemu" at the end. That is there
because we are going to use a script to start dosemu and call the maint.bat
- so afterwards we need it to exit dosemu. < br >
Now a maintenance script to be called from your cron or whatever
else you are using to execute events on your system. I call this script
"dos_maint" and it also lives in /opt/mbse/bin< br >
< pre > #!/bin/sh< br > #< br > COMMANDO="\" maint \r\""< br > < br > /usr/bin/sudo dosemu -dumb -E dir > /opt/mbse/log/dos.log -quiet -I "`echo keystroke $COMMANDO`"< br > < br > /bin/rm /opt/mbse/var/msgs/*.msg< br > < br > #/opt/mbse/bin/dos_poll # Uncomment this line if you are using the Multiple host script< br > --------------------------------------------------------------------------------------------------< br > < br > < / pre >
You will notice this script starts dosemu and calls maint.bat,
and then when its finished there it deletes all those games netmails
and if you run the script for multiple hosts for your games it can call
that as well. Please note the second line is all ONE line, it has most
probably wrapped here.
< p > You will notice that the script calls dosemu and not dosemu.bin,
this is because we need to tell dosemu to open a dumb terminal and not
display to a console or screen. By use of the redirection we redirect
the normal console output to a file, here I have used /opt/mbse/log/dos.log
as that is where all of MBSE's other logs reside. < / p >
< p > Once "dos_maint" is run via the cron it will run maintenance on
your dos doors, process inbound/outbound interBBS game packets and have your
outbound packets ready to send. Thats about all there is to do :)< / p >
< p > Note: You can make variants on these scripts for running daily
maintenance or just packet processing at certain times of day. They
are just variations on the information above, but if you have questions,
contact me! < br >
< / p >
< p > Have fun! < / p >
< / td >
< / tr >
< / tbody >
< / table >
< a href = "#_Doors" > < img src = "images/hand.up.gif" border = "0" alt = "Up" >
< / a >
< / p >
< / blockquote >
< / body >
< / html >
