From 438a77d371501d065f7c0e5c9e7a88269943073c Mon Sep 17 00:00:00 2001 From: Michiel Broek Date: Sat, 1 Jun 2002 13:46:50 +0000 Subject: [PATCH] Splitted ChangeLog file --- ChangeLog | 4577 ----------------------------------------------------- Makefile | 1 + 2 files changed, 1 insertion(+), 4577 deletions(-) diff --git a/ChangeLog b/ChangeLog index 67881511..9c187129 100644 --- a/ChangeLog +++ b/ChangeLog @@ -4,4583 +4,6 @@ $Id$ The good news is at the bottom :-) -v0.00 Started work on the Rapidbbs sources to make new structures, - headerfiles and makefiles. - The whole thing will include Fidonet echomail and tic file processing. - -v0.01 Until v0.06 lots of sourcecode fixes, bugs removed which became - visible after writing the new header and makefiles. Included common - and jamapi libraries. The jamapi is not in use yet but will be the - final message base format. - - Rewritten the mbse deamon. This deamon monitors the bbs and all the - utilities. - - Written an import util to import textfiles from the databases exported - by a little Pascal program that exports the RA databases from the DOS - bbs. - - Started writing a new setup utility. While doing this the old config - program is being stripped down. - - Renamed the filelist program to allfiles. - -v0.06 In the internal mbsed server structure added information for user - online messages. Added ADIS:2,pid,flag; set users Do Not Disturb - flag, also changed the bbs to sent that flag. - - Added Status commands to the mbsed, test for BBS open, and Zone - Mail Hour. 2 new statements in etc/mbsed.conf. The mbsebbs now - tests at startup for ZMH and BBS open. If it is closed the user is - disconnected with the reason why. - -v0.07 The new structures are ready. The bbs can run with local mail only. - - Renamed the filepack program to mbfile, it will do a lot more later. - - Removed the whoson program, the functions are in the setup program now. - - Added in the setup program the oneliner editor, protocols editor, - language setup editor, limits editor. - The oneliner editor has an import facility to import plain textfiles - to add oneliners. - - Changed structures again, lastcaller and ttyinfo. - - Removed the usered program, the users editor is in setup now. - - Fixed the download (non batching) function DownloadB, it does work - more or less. Changed the calling program from execl() to system() - to fix the stack problems. Now need testing voor carrier loss and - timeouts. - - After testing with a DOS-PC (A real fast 286 10 MHz state of the art - of the eighties, directly connected to the tty port) the Good_Bye - function needed 5 seconds extra delay to be shure all data is - send to the user. Also the parent died too fast so the mbsed server - wasn't notified when the client was logged off. - - In the bbs chat.c added unlink the /tmp/.BusyChatting file so the - chat could be more than once in a session. - - In the internal mbsed server structure added information for user - online messages. Added ADIS:2,pid,flag; set users Do Not Disturb - flag, also changed the bbs to sent that flag. - - Added Status commands to the mbsed, test for BBS open, and Zone - Mail Hour. 2 new statements in etc/mbsed.conf. The mbsebbs now - tests at startup for ZMH and BBS open. If it is closed the user is - disconnected with the reason why. - -v0.08 Added the JAM c api. This is a modified version for Linux. - - Reading JAM messages and Quickscan JAM messages implemented. Removed - support for the old message base format. The function Msg_Post() does - not work anymore, must be rewritten to support JAM. - - In the msgpack program removed all code for the old message base - format. Inluded support for client/server. - - Removed all structures of the old message base format, the only - format left is JAM. - - -v0.09 22-Mar-1998. - In Language data compiler removed output to screen for each compiled - line. When finished compiling it reports the number of language lines. - - Changed the number of lines for the line editor in Post_Msg() and - Reply_Msg() in a #define statement. In the language source it still - allways says 60 lines. - - Bugfix in mbsetup: edit message area item 7 an 8 didn't work. - - Start writing of man pages. - - Start writing mbfido, the net- echomail tosser, scanner and packer. - Succeeded tossing echomail, no dupechecking, links checking or other - checks are done. No reply linking either. - - mbsetup: Added Fidonet aka setup. - - Moved JAM I/O functions to the common directory. - - Created the mbmon program out of mbsetup. Removed those items from - mbsetup. - - Start build of the dbase library, this library will contain functions - to access the configuration datafiles for all utilities except the - mbsetup program. - -v0.10 15-Apr-1998. - Allfiles changed to make use of the common and dbase libraries. Does - logging now of activities. Removed links to src/bbs/funcs4.c - - Added fileareas and filesdatabase import to the import program. - - Corrected file area mismatches in mbsebbs and fedit. - - Mbsetup: finished global setup. Fixed pull filegroup and messagegroup. - Added edit bbs file areas. Changed format of fareas.data. - - mbfido: Added first dupechecks, only logging. Fixed errors in dbase - search routines, caused mail to be tossed in the wrong directories. - Added tossing of bad (unknown areas) and dupe mail in the bad and - dupe boards. Checks for .PKT destination implemented. Ideas for - netmail tracking written. Dupe checking seems to work, but I can't - compare it with my other tosser yet. Note after more testing: - it's better than GEcho's 1.11+ dupechecking. - - allfiles: Opens header.txt now only before processing the areas. - Added footer.txt. Both files must be in the configfiles directory, - if they are not present, nothing will be inserted. Removed all code - that constantly opened and closed the output file. Added logging for - total processing time. Added new lines to the area headers. Areas - are only written if there are downloadable files in them. Download - counter now represents bbs downloads, ftp downloads and file requests. - The last two counters are not in use yet. - -v0.11 26-Apr-1998 - mbsebbs: In the mail reader swapped From and To language fields, the - names were in the right place. Added the nodenumber after the from - name. Must be set for messagearea type (Local/Net/Echo). - - mbfido: Corrected some loglevels. - - userpack: rewritten from scratch. Deletes unix accounts as well, uses - /usr/sbin/userdel to do this, so shadow support works just fine. - This program must be run as setuid root setgid root. - - structs.h: removed flags for Unixmode and all related flags. - - mbuseradd: written. This is a setuid root setgid root version of - adduser, this program is called by newuser to create the unix account - of a bbs user. It also creates the homedirectory, the .profile file - and expires the unix account password. When a new created unix user - logs in he will be prompted for a new password. - - newuser: lots of rewriting. Added inactivity timers. Now we have - always unix accounts and fido bbs accounts. It will also die - nicely when the user did hangup on us or waited for idle timeout. - - mbsebbs: Check for unix account, if it doesn't exist the user is - forced to create a unix account. If unix login we now have a pause() - at the same place the password prompt is so the user can see the - opening screen and read it. - Removed the code that there was a parent (guarding users logon time) - and a child process (running the user). There is only one process now. - Implemented keyboard input timers. The total onlinetime must be - guarded in another way now, ie. checking must be done at prompts. - In the mean time proper idletimeout, hangup and error conditions - will log the user off in a neat way and writing into the logs about - what happened is mostly solved. - - mbsebbs and newuser: New users can only be handled by the newuser - program. Listed users only by the mbsebbs program. You need 2 accounts - without a password for this. Maybe I'll chain these 2 programs later. - - misc: compiling is a mess again, more libraries are needed, time to - close this version. - -v0.12 07-May-1998. - mbsed: Rename the logfile from "mbsed" to "mbsed.log". The mbsed - logfile is opened and closed everytime now. Logfile cleanup utils - can now safely remove the logfile, make it smaller etc. - - mbsebbs: Splitted misc.c into bye.c, pinfo.c and misc.c - - dbase library: added userrecord search. Added netmailboard search. - - mbfido: removed segmentation fault caused by a too long kludge, added - a check for the stringlength (512 bytes). Removed bugs in netmail - destination tests. Implementation of ftn netmail import into JAM area. - Only the first netmail area is used, no need for several areas now. - - mbsebbs: Added aka display when reading netmail. Changed autowrap - to line 74. - Added test for users handle when scanning new mail. - Removed test tlcap() when comparing names. The tosser should correct - the names. - Changed the MsgSelectPrompt() to default return the lastread pointer - instead of message 1. - Changed Read_a_Message() so it will return TRUE if message read was ok, - FALSE otherwise. - CheckMail() now starts searching at the users lastread pointer. It - now also keeps track of messages to the user, and gives the option - to read them. Reply is not possible yet, but posting isn't working - also. - Added a check that the receivername must exist to prevent false new - mail. - Changed UserList() to skip the empty userbase records. - Place the users timecheck functions in a separate file, made it work - again. Inserted timecheck points at several prompts. - Changed the timebank to reflect new timecheck routine's. - Moved the exitinfo functions to a separate file, several other modules - now use new functions in this file instead of internal ones. - Changed FileArea_List() to work with options (F+ and F-) for direct - area change. - Improved the fatal menu error construction. The user now sees a message - and will logoff by SIGILL. - -v0.13 24-May-1998. - mbfido: - Added a debug line to show flagfield of the original packet. - Added code to fill the message header MsgIdCRC and ReplyCRC - fields. - Added version info in the logfile. - - mbsebbs: - Corrected unixmode login problem if there where more than one - field within the gecos field of the passwd file. - Added version info in the logfile. - Changed the setting of signal handlers, removed SIGINT, added - SIGILL. - Supress display goodby screen in case of a SIGHUP. - Display ttyinfo.comment instead if ttyname in connect info. - Added create/check for subdirectories wrk and tag in the users - homedirectory, wrk is for the users homedir fileoptions, tag - is where symlinks of tagged files area placed. - Corrected message diplayed to user when logging in during zone - mail hour. - Removed menu option GlobalDownload, see new feature below. - Implemented download file tagging in menus FileList and - NewFilesScan. - Implemented download tagged files, the old download function - is gone. - Moved Change_Protocol and Set_Protocol from file.c to change.c - where they belong. Change_Protocol is now Chg_Protocol as all - other functions in change.c use the same naming convention. - Made KeywordScan and FilenameScan working without coredumps, - implemented file tagging. - Made enum vars for WhosDoingWhat. - Changed the internal filearea record number, area 1 is now 1, - not 0. This should prevent a lot of bugs. - Now setting large timeouts on the client/server guard during - filetransfers to prevent server disconnection. Changed mbsed - and common.a for that. - Added logging info when user is kicked out if the BBS is - closed. - Split file.c into file.c and filesub.c - Added menu function 111, Copy file to home directory. - Download_Home, Delete_Home, List_Home, Upload_Home now all work - with the new directory structure. Upload and Download homedir - do not count uploaded/downloaded bytes, the user gets no ratio - bonus after upload, only the up/downloads are counted. - Quota check for users home directory. The value can be set - with the mbsetup program, value is MBytes. - Removed error message if user selected a menu option where he - has no access rights for. The user now sees nothing. If you - want to give a response, use the menu system! - Reset colors to lightgray on black after logoff. - Added menu function EditTaglist. - - mbsed: - Invented two new commands, ATIM:1,n; which set a new client/ - server timeout, and ADEF:0; which resets the client/server - timeout to 600 seconds. - - common.a: - Implemented the two new client/server commands: ATIM and ADEF. - - mbsetup: - In global BBS setup, added editing Users Quota. - - import: - In FDB import, changed the filenames to lowercase. - - allfiles: - Output list now contains CR/LF at the end of each line. - - mbuseradd: - Added the line "export TERM=pcansi" to the generated .profile - in the new users home directory. This seems to work quite well - for all kinds of clients. - - - -v0.14 02-Jun-1998. - msgpack: - Renamed to mbmsg, it will do more as just packing messages. - Implemented using the msgbase.a library: Purging (Days old - and Max msgs), Packing deleted messages and Reply linking. - During pack the messages are renumbered and lastread pointers - are adjusted. - - mbsetup: - Added edit messagebase storage type. - - msgbase.a: - New library, universal message base library, must support - JAMmb, Fido *.MSG, Passthru, Usenet news and E-Mail. - This came original from LoraBBS, written by Marco Maccaferri. - I changed the sources to normal C code without objects, that - was the fastest method to mix it with the existing sources. - I dropped support for Hudson and Squish. - Only JAM is supported for a start. - The JAM module renumbers the messages while packing. - Added support for lastread pointers. - Changed all msg handling so that the messagetext must contain - all the kludges to be compatible with several message bases. - This means that the JAM module now handles the kludges in the - text, storing and retrieving it between the *.jhr files and - text. This also means that the applications don't have to - worry about kludges. - - mbsebbs: - Changed mail.c to work with the new msgbase library, dropped - the old jamapi. Scanning new messages looks slower, maybe - the speed improvement must be made in the msbase library. - Applied all changes in the messagebase library to the bbs - program. - - mbfido: - Applied all changes in the messagbase library in the tosser - module. While doing that I saw some bugs but they don't - mather anymore. - - - -v0.15 13-Jun-1998. - msgbase.a: - Implemented msgbase locking for JAM messagebase. Dropped - future support for other messagebase formats, I stick to - JAM and only JAM, it can do all we need, including mailer - netmail directory. - Implemented all possible attributes in the interface. - - dbase.a: - Removed some bugs in dbmsgs.c - Added code to update the nodes and msgs data records if they - are changed. - During msgs record loading the group record will also be - loaded if it's defined. - Added support for .tic area lookup. - - mbmsg: - Implemented msgbase locking during msgbase updates. - Added colours. - - mbfido: - Implemented msgbase locking during msgbase updates. - Implemented simple echomail forwarding in the queue. - Splitted tosspkt.c into importmsg.c echoout.c and tosspkt.c - to make the source more readable. - Started collecting SEEN-BY and ^APATH information in memory. - Started appending SEEN-BY entries during echomail forward. - Added code which should append SEEN-BY and PATH lines in - outgoing echomail. - In the startup code changed the catching/ignoring of signals. - Activated mail send and received counters in the nodes - records. - Activated echomail received counters. - Started working on .tic file processing, using my own MBFIX - code (in Turbo Pascal) as a guide. - - mbsed: - Changed the server locking in a more portable and secure way. - Added sequencer counter for generating MSGID numbers and - message packet numbers. - Removed a bug in response strings when the BBS is closed. - The signal SIGTERM is now ignored, we wait for SIGKILL only - so we keep running as long as possible. - - mbmon: - Added support for sequence numbers display. - - mbsebbs: - Removed a bug in the syntax of BBS closed messages. - Added a toggle switch to display message kludges for the sysop. - Added hilite color for quoted message lines in message read. - - mbstat: - The BBS close command doesn't need a reason anymore. - Implemented the wait function. We only wait for users online - and utilities that we want to complete their actions. Depending - on the type of init program, if it uses shutdown scripts, you - can now wait for the system to become idle before the real - system shutdown starts. - - - common.a: - Added a flag "show_log" to the Syslog function to suppress - logging to the screen. - - mbsetup: - Added support to edit .tic areas. - Started working on the creation of a site document, this is - a complete overview of the whole setup. - - -v0.16 06-Jul-1998. - - General: - This version is the first version installed on the real BBS - server, line #2. While doing this I discovered lots of errors - in the Makefiles because I installed it from scratch. I also - found out that GEcho and or RA is screwing up some JAM bases - causing this program to dump core. Did some testing, download - and mail reading is ok. - - mbsebbs: - NewfilesScan and show files listings now work with the file - upload dates instead of the real filedates. - - mbfido: - It's possible to import .tic files into the bbs. - Unknown echomail areas now log with WriteError(). - Added functions to pack mail for downlinks and put it in - the mailer outbound. - Because of small diffrences between ifcico and DOS mailers - running 2 mailers together still doesn't work for attached - files and mail. - Fixed a bug in outbound mail packets, the packed messages - didn't start with 0x0002 so downlinks didn't process the - messages. Output of echomail works now! - When processing large amounts of .tic files, the processing - stopped after about 30 files. Added 2 forgotten fclose - statements. - Added sorting functions for filenames with date/time. All - inbound processing is now sorted by date and time, oldest - files first. - - common.a: - In mbfile.c changed file_cp() to copy file attributes as well. - - userpack: - Changed commandline syntax. - - mbmsg: - Changed commandline syntax. - - mbstat: - Changed commandline syntax. - Added colors. - Does timeout after one hour waiting for the BBS to become free. - - mbsetup: - Added setup for .tic magic records. - Improved logging reason when tossing messages not for us. - - dbase.a: - Remove a bug where reading downlinks from areas base gave - nothing. (Introduced in 0.15). - - mbmon: - Corrected the screen header. - - -v0.17 30-Jul-1998 - - mbfido: - When importing files to the BBS the destination directory - is checked and created if it doesn't exist. - Improved checks when to rearchive incoming files. - Forgot to chdir back to the inbound when rearc failed. - Switching virus check off when the inbound file isn't an - compressed archive. Should check incoming *.exe (selfextracting - archives). - Keep number of files now works. - TIC forwarding to downlinks implemented. There are 2 netmails - for each forwarded file, one for the file itself and one for - the .tic file. The subjectline is to short under Unix. The - second netmail is an empty one, lets see how this works. - Added cookies. - Packing ARCmail now checks for bundles older then 5 days and - creates new bundles if found. - Added netmail pack to ARCmail. - Improved errorlogging again when tossing bad echomail. - Scan for outgoing echomail from the bbs is working. It is a - complete messagebase scan for now. - TIC forwarding again with one netmail, I faked the subject - line, all files seem to come from C:\FILES\. This seems to - give no problems with the other end of the link. - - mbmsg: - Improved debug logging. - Processing in only one area didn't work anymore. - - mbsebbs: - Made post new message work. - Now unlocking and closeing the messagebase after a crash. - Moved the lineeditor to a seperate source module. - Reply to messages is working, also from scan for new mail. - Comment to sysop now works. - Removed the Voting door. - - -v0.18 10-Aug-1998. - - general: - New record structure for fidonet networks. This makes - it possible to use the same nodelist indexes as ifmail. - Note that de define -DHAS_NDBM_H may only be set if you - have done this also in the ifmail package! This is set - in ~/src/mbfido/Makefile - - run_inout: - A shell script run from the mbse crontab (every minute) to - see if there is something to do. It scan's the protected - inbound and scan's for the ~/sema/mailout semafore. - - mbsebbs: - Creates a ~/sema/mailout semafore if mail is entered. - Added extra debug logging during newmail scan. On the live - bbs mbsebbs keeps on dumping core probably due to RA or GEcho. - Most amusing is that after crashing mbsebbs, RA will see new - netmail again, as if only mbsebbs knows how to handle the - users lastread pointers and fixes them for RA; sigh. - - mbfido: - Start working on the netmail tracker/router. It works without - an external routing file, although hosts will need one. - It works on checking known nodes, then nodelists, and then - known nodes again. This is very experimental. - - mbsetup: - Changed to the new fidonet structures. - - import: - Changed to the new fidonet structures. - - general: - Installed at 13-Aug-1998 at the BBS for testing. - - -v0.19 14-Aug-1998 - - general: - Wrote some documentation about how to setup the ftp server - so that it works together with MBSE BBS. - - mbsebbs: - After download the message "updating download counters" now - will first send a to overwrite the zmodem init string - on the users screen. - Added structures for bluewave. - Now scans for new files at logon. - Removed global variable sUserName, gave some strange results. - Added logging which msg area was active when a segmentation - fault occurs. - - script: - A new subdirectory for /bin/sh scripts. Look out with this - one, if you modify the scripts in ~/etc or ~/bin directly - they will be overwritten with each new install. - - mbuseradd: - Add each new user to /etc/ftpusers to prevent them to login - under their own name in the ftp server. - - fbgen: - Setting umask to 002. - - fileedit: - Removed, was obsolete. - - import: - Setting umask to 007. - - common.a: - mkdirs now creates directories with permission 0775. - Added dos<->unix filenames translation. - Rewrote tu() and tl() functions. - - mbfile: - Setting umask to 002. - Now checks for files on disk, but missing in the fdb. Deletes - them when found (exept some). - Now when packing the fdb records marked for deletion, also - if the file is on disk, it is deleted. - Added some commands to the todo list. - With the check command it now reports the area number to the - mbsed server, so mbmon will display how far it is. This will - also avoid timeouts on large areas. - Now handles multiple commands in one run. Pack will run - automatic if there are files deleted. - - mbfido: - Set a semafore "msglink" when the message base is modified. - Added more debug logging for files descriptions. - Implemented dos<->unix filename translation for tic file - forward. - File attaches in .flo files now are DOS filenames and .flo - files are now DOS-compatible. - If there are no more then 2 Long Description lines we asume - that there is a better single (old style) Description line. - There are uplinks that make a mess of these lines. - Netmail forwarding should work now as long as the nodes via - we must route are in our setup. - - mbsed: - Added in wait for free the mbindex and mbuser programs. - - mbindex: - Written. Heavlily based on Eugene Crosser's ifindex. - - mbsetup: - Written the menu editor and removed the old mbconfig program. - Added some editor commands to the user editor. - - mbuser: - Now leaves the records alone with the NeverDelete flag set. - - mbmsg: - Added logging when a segmentation fault occurs which was the - last message area. - - -v0.20 24-Aug-1998 - - common.a: - Moved from mbfido the modules ftn, falists, nlindex and - nodelist to this library. More programs will need it. - - mbindex: - Changed some loglevels. Removed the -force switch, compile - is always forced now. - Removed a bug to the path of the index files. - - import: - Now using dos2unix pathname translation for fileareas and - mailareas import. - - mbfido: - Changed some logging. Removed ftn, falists, nlindex and - nodelist modules, they are now in the common library. - - -v0.21 25-Aug-1998 - - mbindex: - Trashed the index files when a new nodelist in the setup - was added. (ifindex did this also). Now it will allways - force to recreate the index files. - Now sends username who started mbindex to mbsed. - - mbfido: - Imported files into bbs areas now get filemode 0644 instead - of 0660 so the ftp/www clients will really see them. - Corrected the experimental replace test, could never work. - If after trigger the compile nodelist flag there came in - another file, the flag was reset. - Now sends username who started mbfido to mbsed. - - mbsebbs: - Created a language crossreference listing. Corrected some - language numbers. - After changing the language, it is now confirmed in the - new selected language. - When the language file is missing, the error message no longer - comes from the missing language file, now it is hardcoded. - Minimum location length is now adjustable with mbsetup, - changed language prompt 74. - Replaced hardcoded messages in chat with language prompts - 59 and 60. - Changed error logging in exitinfo.c - When reading messages the more prompt is now language prompt - 61 instead of hardcoded. - Posting messages is now blocked for Noreply boards. Language - prompt 438. - In message readpanel now language prompts 211 and 212 for - Next reply: and Reply to: threads. - In message area select now using prompt 207. - In newmailscan, added prompt 218 and the Quit option. - In message status, added prompt 226. - Readpanel, added prompt 227. - Delete specific message subfunction does work now. - In display file with more, changed prompt 72. - Changed prompts in file.c and filesub.c. - The info screen is 1 character smaller, 79 characters, some - terminal programs did extra line wrapping. - Added new language file format, the datafile now includes - the keys users can press. - Moved the loading of user's preffered language more to the - begin of the login procedure. - When the user is unknown (ordinary BBS account), the newuser - programm is started. If that runs successfull (depends on the - user on-line), mbsebbs will be run again. It's probably wise - to merge these 2 programs. - - mbsetup: - Minimum location length installed in menu 1.5 - - allfiles: - Now sends username who started allfiles to mbsed. - - mbfile: - Now sends username who started mbfile to mbsed. - - mbmsg: - Now sends username who started mbmsg to mbsed. - - mbstat: - Now sends username who started mbstat to mbsed. - - mbuser: - Now sends username who started mbuser to mbsed. - Did leave the users.data file owned by root. It is now - set to the owner and group of the "mbse" account. - Added screen output for non-quiet mode. - - lang: - Changed to compile new language datafile format, including - the keys a user can press. - - newuser: - Added new language file format, the datafile now includes - the keys users can press. - Now always asks Date of Birth, this is necessary for later - checks. - At the end now engages mbsebbs. - - mbuseradd: - Now uses the created gid and uid voor changing ownership - of files and directories. - - -v0.22 06-Sep-1998 - - mbsetup: - Changed logfile to one master logfile. - Added menus for offline reader. - - allfiles: - Changed logfile to one master logfile. - - mbsebbs: - Changed logfile to one master logfile. - Started offline reader. - - mbfile: - Changed logfile to one master logfile. - Corrected creating full path/filename in pack files. - Added creating and removing symlinks for file requests. - Now deletes files during "kill" instead of only marking. - Simplified log messages. - Added commandline switch "req", this will only check the - file request symlinks. - - mbmsg: - Changed logfile to one master logfile. - - fbgen: - Changed logfile to one master logfile. - - newuser: - Changed logfile to one master logfile. - - mbuser: - Changed logfile to one master logfile. - - mbstat: - Changed logfile to one master logfile. - - mbindex: - Changed logfile to one master logfile. - - mbfido: - Changed logfile to one master logfile. - Added creating and deleting of symlinks for file requests. - Files removed from the filedatabase when running "keep files" - are now also removed from disk. - Removed some debug logging for netmail forwarding. It seems - to work. - Replace files now works more or less. Moved the fdb packer. - - mbindex: - Only logs crash cause if errorlevel > 0. - Removed some invisible screen output in quiet mode. Cron did - notice this. - - lang: - Renamed to mblang, also the source directory is now mblang. - The directory lang will now be used for language sources. - - -v0.23 20-Sep-1998. - - global: - Added #pragma pack(1) to ~/src/include/libs.h so that all - datafiles are now compatible over several hard and software - platforms. I needed this to implement the BlueWave Offline - Reader into the bbs. Increased the QWK tagname field to 20 - characters. - - mbsebbs: - Made menu execution logging more readable. - If a user has no archiver set, set default to ZIP at logon. - Changed logging in the Download Direct command. - Implemented first raw version of BlueWave Offline Reader. - Needs some security improvements, file requesting, filters - but it works for now. - Checking for a Unix account was done before the password was - checked, so if the password was wrong the user was asked for - a new Unix account again. - - mbfido: - For netmail import now searches the netmail area on zone:net - match. - - import: - Removed bugs when converting DOS to Unix paths which resulted - in corrupted pathnames. - - mbsetup: - Corrected linefeed problem in language doc printing. - Horizontal line drawing now with low-ASCII instead of Alternate - Character Set. - - mbmon: - Horizontal line drawing now with low-ASCII instead of Alternate - Character Set. - Corrected a color problem in View BBS Information, and added - display BBS startdate. - - -v0.24 30-Sep-1998. - - structs.h: - New fields in config.data: OLR_MaxMsgs, OLR_NewFileLimit, - OLR_MaxFreq. - New fields in mareas.data: OLR_Default, OLR_Forced. - New fields in ttys.data: honor_zmh. - Added Areafilename field to group records. - - mbsebbs: - Combined some functions from offline.c and mail.c into - msgutil.c - Messages posted with a OLR are now counted in the users record. - Closeing the bbs during Zone Mail Hour can now be set for each - individual line. - Now counting and marking the date/time when posting messages - in mareas.data. - - mbsetup: - Corrected some sitedoc problems in global setup. - Added sitedoc printing for mail setup. - Added file and mailgroups setup to the nodes setup. - Added newfiles reports setup. - Added filefind areas setup. - - mbfile: - Corrected spelling error. - - mbaff: - New program. Announce new files and FileFind (Allfix). - - mbfido: - In .tic file processing if we were a pointaddress, the path - checking always gave an error. The check of our boss is - skipped now. - The correct .tic area and filedate is now set in the toberep - database. - - mbmsg: - Improved initialisation. - - -v0.25/a 12-Oct-1998. - - general: - From now on version numbering will get /a (Alpha), /b (Beta) - and /g (Gamma) release extensions. This is necessary for - live testing at my bbs. - - mbfido: - The Cost field in the toberep.data file was not set. - - msgbase.a: - Added extra screen output in certain error conditions. - Added a trick to generate a FromAddress from the Msgid - in case there is no FromAddress. This was left blank by - GEcho 1.11+ (DOS). - - mbaff: - Added some IsDoing information for the monitor. - Setting ReplyCRC to -1 instead of 0 if it's an original - message. - Minimum searchstring length is now 3 characters (hardcoded). - Added a check to see if there is a FromAddress and a Subject - before a message is added to the scanlist. - - mbsebbs: - Corrected spelling error in OLR download logging. - - mbsetup: - Changed some page layouts in the sitedocs, added some - forgotten formfeeds. - - -v0.25/b 14-Oct-1998. - - mbfido: - If the tic queue directory didn't exist, it is now created. - Netmail messages now have zone:net aka matching on the - destination and from addresses. - Started with the AreaMgr and FileMgr functions. It can respond - to %help. - Added the notify function. - - mbsetup: - When picking a mailgroup in messages setup or a filegroup - in ticsetup, the ftn aka is copied from the group setup as - a default aka for that area. - When setting the area tag and if the OLR tagname is empty, the - area tag is copied there as a default. - - -v0.26/a 17-Oct-1998. - - general: - In some databases in the header there is now a time_t field - added. This is to mark the last statistics counters rollover. - Programs that count statistics must perform an rollover when - it's run on a new day, week or month. - - warning: - To upgrade the databases, enter the setup for message areas, - tic areas, nodes, file groups and message groups and save - the databases. - - mbfido: - Implemented new statistic counters. - Implemented rollover of the statistic counters every week and - new month. - Changed program locking, now it locks the whole program in - stead of short moments. - - mbsebbs: - Implemented new statistic counters. - - mbaff: - It now counts the posted messages in the message area. - Corrected the announce message text. - - -v0.26/b 20-Oct-1998 - - mbsetup: - Wrote the hatch manager. All basic functions are present now. - All databases that can be packed after deleting records can - do this now. During update those databases area sorted. This - is not for the message areas, files areas and the userbase. - These files may not be packed. - - - -v0.27/a 29-Oct-1998 - - general: - Changed the database format for the files. Added support for - long filenames. The .tic file area is also stored in the - records to make the rescan function work later. - The files database must be rebuild for this release!!! - The BBS and the rest of the programs now use different - loglevels. - Changed the sourcefile distribution name to mbseN_NN.tgz. - - upgrade: - Delete all file databases! - mbsetup 1-5-20: set utils loglevel. - run mbfile check -debug to fix the files references. - - dbase.a: - Functions added to connect and disconnect nodes from echimail - and file areas. - Now marking the nodes record invalid after update. This should - prevent corrupting the nodes.data file from now on. - - common.a: - Added a function to convert ifcico addresses to internal fido - addresses. - Removed a pointer bug in the aka2str function. - - mbfido: - Added most AreaMgr and FileMgr functions. Needs a lot of - code cleanup but most things work for now. - Now imports the TIC area name in the filedatabase. This can - later be used for %resend requests. - The long filename field is filled with the dos filename for the - time being. - - -v0.27/b 04-Nov-1998 - - general: - Changed the top Makefile, it "forgot" the script directory. - This release adds nodelist diff processing and hatching of - new files, for example the nodelist you just created. - Switched to compiling with ndbm.h, this is now default - because the nodelist can now be opened by several programs - at the same time (for reading). Support for dbm.h will be - dropped, it gives trouble and cannot be used on a multiline - system. - Created the semafore.doc document for semafore handling. - - common.a: - Added the semafore functions. - - import: - Implemented long filenames on files database import. - - - mbfido: - Changed the way of counting FILE_ID.DIZ lines in archives. - Made macro's in tic processing case insensitive. - Implemeted automatic hatching of files. - Creates the "mbindex" semafore when new nodelists have been - put in place. - - mbuseradd: - Changed the contents of users .profile to: - . $MBSE_ROOT/etc/profile - The file $MBSE_ROOT/etc/profile contains the global startup - commands for normal bbs users. - - - mbsebbs: - Changed debug logging of DisplayFile function. - Logs the tty line comment after the username at login. - Linked with the new common/semafore functions. - - mbdiff: - New program. Nodelist diff processor. Creates the "mailin" - semafore when it created a zipped nodelist. - - mbsetup: - Added tic echo group pick in hatch and magic setup. - Removed setup of semafore path's, they are now hardcoded. - - mbcico: - A quick hack of Eugene G. Crosser's ifcico. At this time - only the logging functions using mbsed are implemented. - It needs ~/etc/mbcico.conf for configuration together with - the standard database configuration. In time, the mbcico.conf - file will not be needed anymore. For testing in this release - it does the job. - - mbaff: - Linked with the new common/semafore functions. - Creates also the msglink semafore when mail is written. - - mbindex: - Removes the "mbindex" semafore when the nodelists are - successfull compiled. During compiling it places the - "compiling" semafore. - - mbmsg: - Removes the "msglink" semafore when the messagebases are - linked. - - mbstat: - Now maintains the semafore's "bbsopen", "bbsclosed", "zmh" and - "scanout" according to semafore.doc. You must schedule - "mbstat check" in the crontan at the start op ZMH and end of - ZMH both on summer and wintertime. If you did configure the - ZMH right in UTC in $MBSE_ROOT/etc/mbsed.conf this will work - if you did setup your timezone correctly. - - - -v0.28/a 18-Nov-1998. - - general: - Modified the structs files to add a database for modems, - changed the tty database to link it with the modems, added - fields in the nodes database for the mailer, added fields - in the global config file to add setup for the mailer. - Dropped nodelist V21 flag, added V32T and VFC flags. The - U flags for modem capabilities must be implemented somehow. - - upgrade: - To upgrade, enter the global setup and leave it, say yes to - save changes. Enter the nodes setup, enter one of the nodes - record, exit and save changes. Setup the modems database. - Enter the tty ports setup, link the modems to the POTS and - ISDN lines and save it. - - common.a: - In crc added crc16ccitt functions. - In clcomm the function IsDoing(char *) now accepts formatted - parameters. - Added function SetTTY(char *). - Added debug logging of nodelist flags. - Changed the way the nodelist flags are parsed, sometimes - U flags became standard flags, and standard flags became U - flags. 'U' became a flag also. - Moved some common files from mbcico and mbfido into the - library. - - mbsetup: - Changed the lineeditor to accept the comma character. - Added modem setup, changed tty lines setup to pick a modem. - Changed nodes setup, finally added the statistics screen. - Changed fidonet setup, first zone is now called "primary zone" - - mbfido: - Added IsDoing info during date rollover. - Removed a bug causing a segmentation fault when a mail packet - had an error. - Removed check that incoming packets must come from a node in - our setup. All received mail packets are now processed. - Echomail must still come from nodes in our setup, the rest goes - to /dev/null - Moved some sources to the common library. - In forward() changed the uppercase functions for the subject - line. The original filename became uppercase also. - Corrected debug logging for packet date, the month was 0-11 in - stead of 1-12. - Added logging for ftsc product name and version. - - mbcico: - Added some EMSI extra logging. - Added more IsDoing info for mbmon. - Corrected the Makefile after testinstall on the live bbs. - Changed the order of the EMSI data to send to the remote - party to be more standard. McMail (maybe others too) didn't - recognize all options send too early. - Added EMSI logging for 'link', 'comp' and 'tranx'. - Moved some sources to the common library. - Completely rewritten the chat module. Everything received - from the modem is now logged. Because all modem responses - including echo from commands, are now logged, the aftercall - function (get modem aftercall or caller id), will go to the - logfile as well. (not tested, I have no CLIP capable modem). - Added patches from ifcico-3.0.cm.alpha-4.0 to filelist.c, - this should better handle files sent/notsent in failed - sessions. - Added counters for sent and received bytes. - Completely rewritten the scanout function. It now searches - only in the outbound directories defined in the setup. - In the fidonet networks of the setup the first defined zone - is the default zone for that domain. Other zones get a hex - extensions with zone number. - Scanning mail for the CallAll option now selects outside ZMH - only crash mail, during ZMH crash and normal mail. Logging - of selecting mail is improved. - When calling a node is failed for 30 attempts, the node will - not be called anymore. If the problem if corrected you now - must manually edit the .sts file or delete it to call that - node again. (Option for the future outbound manager). I think - that sessions errors do this after 3 attempts. - When calling a node, mbcico more ore less automatic selects - a tty with modem that matches the nodelist entries of the - node to call. ISDN is not yet supported. Also a best speed - test must set priority of ports to use. - - mbmsg: - Supressed error message if there was no semafore "msglink" - to remove. - - mbsed: - Added command SZMH, requesting Zone Mail Hour status. - Added command ATTY, setting a new tty port. - - mbdiff: - Removed some unnecessary debug log information. This program - seems to work fine now. (Wow, only needed 2 releases for - this one). - - -v0.28/b 09-Dec-1998 - - general: - Added structure for the mailer history file. - - mbaff: - Removed some debugging logmessages. - - mbsebbs: - Removed some debugging logmessages for newmail scan. - Removed some debugging logmessages from timer functions. - - mbmsg: - Added program info logline. - - mbcico: - Added monitor info during FTS-0001 sessions. - - mbout: - New program, the Outbound Manager, many ideas stolen from other - programs of the ifmail package. - - - -v0.29/a 11-Dec-1998 - - common.a: - Opening of nodelists is now logged at debug level. - Added .pol files to pktname.c - Moved attach.c from mbfido to common library. - Nodelock now tests for own locks, if so, no error is given. - - mbfido: - Worked on the uppercase bug again. It will only happen when - we must forward a file. - Moved attach.c to the common library. - - mbout: - Implemented file requests. - Implemented creating and removing of .pol files to make and - remove polls. - - mbcico: - Calls nodes when .pol file is present. - Made file requests working again, the .req files where not - added to the filelist to send. - When reading node options the NoEMSI and NoWazoo flags weren't - copied to the options. - Corrected a bug in yoohoo.c where it didn't initialize - remote->addr->name to NULL in checkhello(), this caused - a segmentation error and failing Yoohoo/2U2 sessions. Note - that this error is in ifcico as well. - Over TCP/IP with ifcico as other mailer EMSI, Yoohoo/2U2 and - FTS-0001 in- and outbound sessions are working. For other - mailers we will see if it will work in real live. - - -v0.29/b 17-Dec-1998. - - general: - Installed 0.29/alpha on the bbs. - Installed usleep() code in some utils. See usleep.doc for - details. - Changed the nodelist flag definitions to prevent conflicts - with system macro's. - - common.a: - Locking and unlocking nodes gives better error logging. It - now also checks our own pid if the lock was already made - instead of complaining. - - mbfido: - Removed some bugs in logging in magic.c - Changed FILE_ID.DIZ file checking for empty lines. - Now always marks a file announced when importing into the bbs. - Added code to prevent terminal output in quiet mode. - Added usleep() code in statistics rollover. - Added usleep() code in importmsg. (sleep each message). - Added usleep() code in LoadTic. (sleep each .tic file). - Added usleep() code in scan for mail. - Removed error message when "mailout" semafore didn't exist - in scan for mail. - - mbcico: - During outbound EMSI session we send the NRQ option flag, - requests on hold for us are not allowed when we callout. - When calling a node the first thing now is lock the node - to prevent further checking if the node is already locked. - Putstatus is logged for studying status updates. - Experimental status resetting of all nodes after successfull - session. - - mball: - Renamed from allfiles. - Now creates allfiles and newfiles reports. Honors maximum - security level to include in the lists (no flags yet). - Optional parameter -zip will create allfiles.zip and - newfiles.zip. - Installed usleep() code. - It is finished. - - mbout: - No more error message when a file attach in a .flo file is - nolonger on disk. This can happen if nodes don't poll often - enough. - - mbmsg: - Installed usleep() code. - Removed color code output when in quiet mode. - - mbaff: - Installed usleep() code. - Now marks the file announced after scanning the bbs for - uploads. - - mbfile: - Added the usleep() code. - Added some code to lower the disk i/o. - - mbstat: - Now logs status of ZMH with the "check" command. - - mbuseradd: - Added a check to see if the "shadow password suite" is - installed. It is absolutely necessary to have this. - If /etc/login.defs is present, the useradd program gets an - extra parameter "-M", to override the creating of the users - home directory. (Found on Redhat 5.1). - Added an extra check if reading the /etc/passwd file failed. - Added newline characters after some error messages. - - -v0.29/b2 24-Dec-1998 - - general: - Added modem.stripdash and ttyinfo.portspeed in structs.h - - common.a: - Changed logging functions in clcomm.c, repeated messages are - now counted and reported how many there were. A full filesystem - will hopefully not happen anymore. - Added the Nopper function, this one can be called often but - only once a minute a NOP is send to the server to prevent a - timeout disconnect. - - mbcico: - Removed some debugging logs. Added some return codes from the - tty drivers in zmodem send and receive. (removed later, it - didn't work). - Added Nopper code in file transfer protocols. - - mbout: - When creating a poll the node's status record is reset, so if - the node was undiable, it will start polling again. This will - not happen for sessions handshake errors and port errors. - - mbsetup: - In edit tty added edit portspeed. - In edit modem added edit stripdash. - - mbsed: - Corrected ZMH status response. - - mbstat: - Corrected ZMH status check. - - -v0.29/b3 28-Dec-1998. - - mbcico: - Inserted new ttyio code from the German version made by - P. Saratxaga and T. Tanaka. I hope the Zmodem problems will - now be solved. - Added Hydra filetransfer protocol. - Removed Janus, it wasn't implemented anyway. - Corrected modem init routine. - Implemented aftercall function. - - mbsetup: - Removed setup to disable Janus protocol. - - -v0.29/b4 29-Dec-1998. - - general: - Changed the Makefiles. Now only in ~/src/CONFIG you can place - extra defines. - Added compile switches -Wshadow -Wwrite-strings - -Wstrict-prototypes. This gave a lot of code cleanup, maybe some - strange errors are gone. - - common.a: - Corrected the repeative log counter. - Included in nlindex.c HAS_BSD_DB - - mbcico: - Improved ttyio logging, maybe we can better see what is going - wrong when transfering files. - EMSI compatibility protocol now gives Hydra first, then Direct - Zap. - Added file transfer counters to Hydra. Changed Hydra logging - a bit. - - mbindex: - Changed nodebld.c to inlcude HAS_BSD_DB - - mbuser: - Did some screen output when it was in quiet moded. - - -v0.30/a 01-Jan-1999. - - mbfido: - Removed a bug in the program lock that could cause a segfault. - In delete viruswork made rm now work in forced mode. - Hatch files now logs only hatched files. Added the - statistics update. - Changed completly the call module. There were some locking - problems and modem access attempts when the port was closed. - In Hydra the transfercounters are now updated after each - succesfull block. - Added more debugging log to the ttyio driver. - In answer mode we grep the environment variables CONNECT - and CALLER_ID created by mgetty and make log entries. - Swapped timer numbers in Hydra, in tty_write we now don't - test the read timer anymore, this gave unexpected timeouts - and is not according the Hydra specs. - Changed more debugging in ttyio, zmodem and zedzap are still - not working well. - Undiable nodes will not be added to the callist anymore. - - mbsed: - Added some logging in the ZMH status check to see what goes - wrong with asking ZMH status. - Changed the statusfile locking, now the lock tests are done - at 100 mSec intervals instead of 1 Second. - - mbsebbs: - Added CONNECT and CALLER_ID environment variables logging. - - newuser: - Added CONNECT and CALLER_ID environment variables logging. - - -v0.30/b1 10-Jan-1999. - - common.a: - Removed a bug in client.c that caused a segmentation fault - when the connected tty was /dev/console. It is now possible - to run clients from sysv init during system boot. - - mbsed: - Removed a bug in the ZMH status function. - Changed statusfile lock form 15 x 100 mSec to 10 x 250 mSec. - - -v0.30/b2 16-Jan-1999. - - general: - Defined bitmasks for logging. There are now maximum 26 debug - logflags. The logflags are changed from int to long. - All programs have been changed to use these flags now. - - upgrade: - In mbsetup set the new flags in menu 1.5.19 1.5.20 and 1.18.1 - - note: - This version still only compiles on Slackware 3.2 maybe - others, but not on RedHat 5.1 5.2 and RedHat 5.2 Sparc. - - -v0.31/a 23-Jan-1999. - - update: - Recompile the nodelists. Remove old index.dir and index.pag - files from the nodelist directory. - Set new value for dialdelay. - - general: - Removed mbsed from this source tree. From now on this will - be distributed as a seperate archive. - Finally found out why this package wouldn't work with glibc. - Complete rewrite of the nodelist indexes. I don't use any - dbm, ndbm anymore. I wanted username lookup included and - full support for ISDN and TCP/IP only nodes. - It now compiles on RedHat 5.2 Sparc and Intel. - - common.a: - Removed a serious memory leak causing the system to exhaust - all available memory during long filetransfer sessions. - Rewrote the nodelist lookup functions. Search is very fast - because the index file is sorted on nodenumber. - The nodelists will be closed after each lookup so that mbindex - may always compile new indexes. - - mbcico: - In call.c changed the port closing, it will now also close the - port after an unsuccessfull call so multiple calls in one - run will now hopefully work. - Removed a bug when calling a TCP/IP node it was trying to - dial with a modem. - Added random number generator to set the dialdelay before a - call is made. - - mbindex: - Total rewrite for the new nodelist indexes. In -quiet mode - it does the usleep(1) call every 80 lines (if set). Note - that in quiet mode it still runs faster then with screen - output. - The index file is sorted before it is written to disk. This - makes node lookup very fast (faster then with ndbm). - The old files stay on disk in case they are open, which can - only be for less then a second. - The semafore compile is not created anymore, instead the - mbindex program creates a lockfile to prevent that another - mbindex can run. Compiling the nodelists can now be done at - any moment. - Username indexes are not supported at this moment. - - mbstat: - Now only changes ZMH status if the status is really changed. - Will create the "scanout" semafore if ZMH status changes (I - did document it). - - mbmsg: - Changed the logging, killing messages now logs in columns, so - you can easy see how the mailflow and killing develops. - Removed some debug logging (finally). - When screen output is on, the last line is now erased after - processing. - - mbsetup: - Changed helptekst for mailer->dialdelay. - - mball: - Now creates semafore "mailin" when ready so the produced - allfiles and newfiles listings will be imported by mbfido tic. - - mbsed: - Changed the $MBSE_ROOT/sta directory to $MBSE_ROOT/var and - changed the names of the status and reginfo files. - -v0.31/b 06-Feb-1999 - - common.a: - Changed raw keyboard read to get cursor movement keys and other - gray keyboard keys. Only cursor movements is guaranteed to work - This is a limitation of PC-ANSI clients. - This change is needed to write the fullscreen editor. - Removed memory leaks from getheader.c and mbfile.c - Switched to one single .h file. - If loggin "message repeated n times" the first character is now - uppercase as in normal logmessages. - - mbsebbs: - Implemented raw keyboard read changes. - All actions in change.c are now logged. - Made change voice and data phone work. - Removed the (dangerous) gets function from funcs.c - - mbsetup: - Removed ncurses code. - In line editor the delete and insert key is finally working. - Modified help tekst for modem hangup string. - - mbmon: - Removed ncurses code. - In line editor the delete and insert key is finally working. - - mbcico: - If modem hangup string is empty only DTR-drop will be used - to hangup the modem line. - During ZMH mbcico will now only call nodes for which it has - non archived mail (netmail). - Changed ttyio debug logs, could block the session. - For magic file and execute requests now looks for both upper- - and lowercase matches. - Filerequests are searched in the internal database on both - long and short filenames, password protection is supported, - and the request counter in the FDB is updated. - - mbindex: - Doesn't complain anymore when the semafore "mbindex" didn't - exist when it tried to remove it. - Now tests for latest nodelist by filedate instead of file - extension number. - - mbfido: - Creates magic file names for magic filerequests. - - - -v0.32/a 16-Feb-1999 - - update: - Remove symlink directories. - - general: - Changed elapsed time logging, now ranges from seconds to - days with the same stringlength. - Moved signal names to common.a, also included the names - for i386 and Sparc systems. - Added PackNetmail flag to nodes record. - - msgbase.a: - Removed automatic adding of FMPT and TOPT kludges in netmail. - Applications are responsible for adding kludges. - - mbfile: - Removed code to work on symlinks for ifcico file requests. - - mbfido: - Added some code to prevent memory leaks. - The .pkt password check now always logs bad passwords, only - when mail password check is set, bad passwords are fatal. - Added code to keep dupe databases in maximum limits. - Now forcing chdir to inbound before processing each .tic file. - It will now export netmail from the message base. It also - supports packed und unpacked netmail. - Added TZUTC kludge (FSP-1001). - - mbcico: - Changed zmrecv debug logging for hanging session with one - of my links using InterMail 2.50 ML, rev B020. - If polling all lines of a multiline node and the first line - was successfull, mbcico would still poll the other lines. - The random dialdelay is now always 10 seconds or more to give - mgetty the chance to reset the modem and takeover the line - between multiple calls. - During dialdelay the IsDoing status is now sent every second - to the mbsed so you can watch it with mbmon. - - mbsetup: - Changed nodes setup so that password may be upper or lowercase - for remotes that are case sensitive (was always uppercase). - Added support for PackNetmail flags in nodes editor. - - scripts: - In run_inout added the news gateway (echomail => news). - - mbindex: - Now only tries to compile files with a numeric extension, - 2 or 3 digits length. - - mbsebbs: - Wrote a simple fullscreen message editor, more or less - Wordstar compatible. - Fixed a small problem in the line editor. - The maximum size of a message is now 500 lines. - When replying to a message, the original message is quoted - into the textbuffer including an introduction line. - When replying to a message, "Re: " is inserted in the - subject if there was none. - It is now possible to send and reply netmails. - Added TZUTC kludge (FSP-1001). - - mbout: - With poll and stop command you can enter multiple nodes. - With the request command you can enter multiple files. - The request command doesn't create a .flo file anymore, the - actual calling of the node must be done with the poll - command. - - mbaff: - Added TZUTC kludge (FSP-1001). - - mbsed: - Implemented CIPM and CSPM commands (online messages between - users). Updated the programnames list for check if the bbs - is idle. Changed the reginfo file lock to 30 x 150 mSec. - Fixed the Linux Sparc version. - - -v0.32/b 15-Mar-1999 - - upgrade: - Delete the newuser program and any accounts using it. - Move compiled language datafiles to ~/etc. - Move config.data from ~ to ~/etc. - Remove ~/lang directory - chown -R mbse.bbs ~/home/* - Upgrade mbsed to at least v0.32 Alpha. - - general: - The mbsebbs program now runs setuid "mbse" setgid "bbs". - All files are now owned by mbse.bbs, even the bbs users - private files. - All references to directories for the configuration are now - hardcoded to ~/etc, ~/fdb, ~/log, ~/tmp and ~/var. - The directory ~/lang is no longer needed. - The directory /tmp is no longer used, using ~/tmp instead. - Moved the language sources and installation into this source - tree. - - mbfido: - Forgot to append after the TZUTC kludge. - If we were a point, a route to our boss was not found. - Updated for hardcoded paths. - - mbsebbs: - Now runs setuid "mbse" and setgid "bbs". Changed the parameters - to the mbuseradd program. The newuser program is now part of - mbsebbs. - It is now possible to run mbsebbs as a shell, it is even wise - to do so! - Updated for hardcoded paths. - Sending and receiving online messages is now handled thru - mbsed. You need at least mbsed v0.32 Alpha. - Removed the last "gets" function. - - newuser: - No longer exists. - - mbuseradd: - Changed parameters to this program. - Finally worked around the problem of different passwd programs, - we will now let the user supply a new password instead of - creating an empty expired password. The shadow password suite - isn't necessary anymore but it may be wise to use it. - It will not install /bin/bash as user shell anymore, during - loading of the bbs users could get a shell prompt if they were - fast enough. The mbsebbs program is now installed as shell. - - mbsetup: - Updated for hardcoded paths. - Updated screen 1.3, global paths. There is only one screen now. - - mbmon: - Updated for hardcoded paths. - - mball: - Updated for hardcoded paths. - - fbgen: - Updated for hardcoded paths. - - mbfile: - Updated for hardcoded paths. - - mbmsg: - Updated for hardcoded paths. - - mbuser: - Updated for hardcoded paths. - - mbcico: - Updated for hardcoded paths. - If the tty port was locked by another process, mbcico tried - to close the port of that process (and luckily it failed). - Now it won't try to close that port and try to remove the - lockfile. Corrected the logmessages during this situation. - - mbaff: - Updated for hardcoded paths. - - mbsed: - Forgot to close the reginfo file after the CIPM command, - eventualy the bbs stopped logging because mbsed ran out of - file descriptors. - Added the GDST command, to get the status of all (but no - more then 10) mounted filesystems. - - -v0.33/a 25-Mar-1999 - - general: - Changed the users structure for IEMSI flags. - - update: - Open in mbsetup the users database, record 1, and close it. - This will upgrade the users database with new fields. - - mbcico: - Will dispatch mbsebbs when the EMSI string is EMSI_NAK instead - of EMSI_INQ. We then assume the client is an IEMSI client. - In the tty driver changed some error messages to debug log - messages. - - mbsebbs: - Didn't flush the screenbuffer when asking the user to read new - mail so the user couldn't see the prompt. - For OLR download the maxumimum number of file requests is now - taken from the main configuration. - Added IEMSI login support. Tested with FrontDoor 2.11/sw. - Flushed a prompt after file download. - The users filetaglist is removed from disk during logoff. - Deleted Toggle Expertmode, menu 307. - Added Toggle New Mail Check, menu 313, text code ^U1. - Added Toggle New Files Check, menu 315, text code ^U2. - Added Toggle Fullscreen Editor, menu 316, text code ^U3. - Added Toggle Bulltins Read, menu 307. - - mbfido: - Added more debugging messages for netmail processing. Netmail - between a boss and point are being bounced between each other. - At least they don't dissapear anymore. - When forwarding a netmail, all original characters were - lost and messages may have become undeliverable. - - mbsetup: - Added new menu choices that were added to mbsebbs. - - -v0.33/b1 29-Mar-1999 - - general: - Added support for "pktdate" from Tobias Ernst. This is a Y2K - .pkt analyzer and fixer. It is called before each .pkt file - is processed. Indeed, he did also made a Linux version. - Added support for ISDN and TCP/IP nodelist flags. They may - be in the Userflag field or in the authorized flags field. - - mbsetup: - Added .pkt preprocessor installation to global->mail for - the pktdate program. - - mbfido: - Inserted code to call the .pkt preprocessor. - Should insert ^aVia line in forwarded netmails and exported - netmails from the local msgbase. - Will now put netmail for direct links that are not in our - setup (by the stupidity of the Sysop, including me) still in - the outbound (normal status) instead of /dev/zero. - - mbcico: - Added support for ISDN and TCP/IP nodelist flags. - Will now call TCP/IP nodes. This is experimental! It uses the - proposal of Lothar Behet (2:2446/301) of 25 Oct 1998. The - defined flags may be in the User field or authorized fields. - At this moment only the IFC protocol is supported, the ITN - support on port 60177 is under construction. - - mbout: - Added support for ISDN and TCP/IP nodes. - - -v0.33/b2 02-Apr-1999 - - general: - 2 new configuration items, user levels to allow sending of - Crashmail and File Attaches. - - update: - Set Crashmail and File Attach levels in screen 1.4 - - common.a: - Updated nodelist flags and rendundency flags according to - errflags.zc2 dated 20 Mar 1999 (from 2:2/0). I should make - an external table for this. - If a semafore already existed (or was removed), nothing will - be done anymore. When a semafore is created, fsync is called - to make sure it is on disk. - Totally rewritten the .pkt header read function, it is now - more portable and does only one disk read to do that. - - mbfido: - Commented out some debugging logmessages in magic file test. - Corrected the ^aVia lines, in one case the Sysop name was - included, in all cases the year was only 2 digits. For - debugging the milliseconds fields are now different in all 3 - functions that create Via lines. - Now creates .pkt headers in a more portable way and only needs - one disk write to do that. - Now creates message headers in a more portable way. - When creating notify messages, the correct local time is now - entered. - Created a new fidonet date parser, removed the bison parser. - When messages are exported, the fidonet date is generated from - the internal structure, so incorrect received dates are - hopefully corrected on the fly. You should not need pktdate - anymore. - Now sets the local time when a message is imported. - - mbsetup: - When creating new message areas, the security fields will not - be preset anymore. - Removed the gid and start uid values. - Added setup for CrashMail and File Attaches. - - mbsebbs: - Remove an extra close menufile in the menu processing. The - Sparc version aborted with Segfault error on this. - When a message is created, the time is now the correct - local time. - Now sets the local time when a message is received by the user. - When a netmail address is entered, the user will now see the - nodelist bbs name and is asked to verify it. - Only above CrashMail level and if the destination node is CM, - the crash option is presented. - When creating a new user, the gid is now taken from the running - process instead of the setup. - - - -v0.33/b3 06-Apr-1999. - - general: - Due to hardware problems on my bbs, I was forced to takeover - the whole bbs on MBSE BBS, RA is now retired. This means that - lots of things must be solved in a hurry from now on, there's - no way back for me. The MOBO died, it is now replaced by an - old 386/DX33, so I have to fix the parts that slowing things - down. It must be able to run good enough on that board. This - also means that only necessary things are developed from now - on to create a stable and useable version. - - msgbase.a: - The message header read function doesn't seek the whole - messagebase anymore if it needs the next header. This will - roughly triple the speed of scan for new mail. - - mbfido: - Removed check for connected uplink if .tic file was a local - hatched file, there are no uplinks for local hatched files. - Finally found the bug where the TOPT and FMPT kludge info - dissapeared from the netmails causing mail for points to bounce - back to the boss. - Added commandline switch -full to force scan to scan the whole - messagebase for outgoing mail. - If ~/tmp/scan.mail exists the area and message numbers are used - to quick export messages. - It can now attach file attaches. File attaches are not routed. - If the imported file has a magic name, this magic is added to - the file description. - - mbcico: - Will stop calling a node after 3 attempts if there are no - matching ports, or if there is a port error. - - mbsebbs: - Abort on SIGHUP is not logged as error anymore but as normal - log message "Lost Carrier". - With netmails files can now be attached if the user has a high - enough security level. Files must be in translatable DOS range. - Fixed segfault when user tried to select an non existing - filearea. - Creates ~/tmp/scan.mail for posted messages to allow quickscan. - - mbaff: - Creates ~/tmp/scan.mail for posted messages to allow quickscan. - - mbsetup: - Finally added the pull uplink in file and mail group editors. - In the tic area and echomail area editors if the group is - selected and the uplink address is set in the group, the the - first default connection for that area is the uplink. - - -v0.33/b4 13-Apr-1999 - - upgrade: - The ticarea, hatch and magic datafiles are changed in format. - Order of update is important! - 1. Compile all sources, don't install. - 2. Make backup of all .data files in ~/etc. - 3. Announce new files. - 4. Remove *.*.*.*.bill files from the ~/tmp directory. - 5. Disconnect all modems, networks and stop the cron daemon. - 6. Run mbsetup from the source directory. ~/mbb0_33b/mbsetup - 7. Menu 10.2, leave and update the database. - 8. Menu 10.3, leave and update the database. - 9. Menu 10.4, leave and update the database. - 10. If all is well, install the binaries, check mbsetup. - 11. Start cron daemon, connect modems and networks. - - common.a: - Removed errormessage when created semafore succeeded when it - opened file descriptor 0. - - mbcico: - When searching for file requests it tried to use ~/fareas.data - instead of ~/etc/fareas.data. - - mbsetup: - Changed the tic areaname field from 12 to 20 characters. - Corrected screen numbers in hatch and magic pick areas. - Setting the magic "to area" now also uses the picklist. - Does normal logging again. - - mbfido: - Doesn't import the file area name anymore in the filesdatabase. - This needs a workaround because this field is now too small. - The check for quick scanned exported messages failed for - echomail if there was more then one downlink. This forced a - complete scan to be done while everything was really ok. - The .tic file dupecheck is moved to do a little later so that - if some checks fail, the file is not in the dupe database yet. - If the destination path is not available, the file and .ticfile - are moved to the bad directory. - Reads "Fullname" field from .tic file, logging only for now. - Will now process archived tic bundles with extension .c00 where - the numbers can be any digit. (Harald again :=). - More errorchecking in Magic file procesing. - Turned some debugging logging back on. - Corrected a bug that sometimes caused a segfault during tic - processing. - Corrected a routing problem if mail was to be sent to one of - my own points, in case there where more than one point. - - mbmon: - Does normal logging again. - - mbfile: - Calls the Nopper() function now to keep the connection with - the server alive. Good for slow systems and lots of files in - one area. - Removed a small memory leak in the check function. - - mball: - Creates "00index" files in each download directory that is in - range of anonymous ftp users. These files contain the file - names and file descriptions of that directory. A new command - "index" is added. - - mbaff: - Corrected for the .tic areaname size of 20 characters. - - mbsebbs: - Fixed segfault when user was trying to select a non existing - message area. - - -v0.33/b5 26-Apr-1999 - - general: - A new set of grouprecords is created. This is for the announce - of new files, so reports can be created by subject, ie. - Windows, Erotic pictures, Utilities etc. The groupnames are - part of the bbs file areas. - - upgrade: - Set in menu 1.15 the number of newfiles groups. - Create the several newfiles groups. - Install in all bbs file areas the right newfiles groups. - Install in all newfiles reports the right newfiles groups. - - mbsetup: - Will now ask if messagebase must be created if it doesn't - exist. - Implemented the setup of newfiles groups. - Will now show the TZUTC time instead of system generated - timezone (didn't work on RH systems). - - mbcico: - Changed some logging, removed some debug logging. - - mbfido: - Corrected a errormessage when the file import failed in a - non existing area. - If the file is imported in a bbs area, and that area has a - separate Newfiles groupname, that name will be stored in the - toberep.data file for announce. - If a fdb area doesn't exist during file import, it will be - created on the fly. - Doesn't send empty netmails anymore if node has tic messages - off. Only messages with text in it are send now. - Switched .tic description lines logging on again because there - are some strange descriptions coming in. - Fixed a problem when there was only a normal description line - in the incoming tic file, the downlinks got a shortened - description line. - Doesn't strip Hi-ASCII from FILE_ID.DIZ file anymore, only - control characters. Stripping of Hi-ASCII should only be done - by file announce programs (if the moderator wants that). - - mbdiff: - Removed a lot of debug logging. - Removed unarchive functions as they are already in the common - library. - - mbindex: - Removed some debug logging. - It now deletes old nodelists from the nodelist directory exept - the most recent two lists. - - mbsebbs: - Added logging of selected file and message areas by the users. - During mailscan and filescan inserted call to Nopper(). - Wrote a new Getstr function to create Unix accounts, this - one won't accept spaces. (Thanks to Henk de Graaf, a user - who failed to login). - The username won't be converted to lowercase anymore when - his Unix account is created. - The Unix name has to be at least 3 characters. - - mbaff: - In the announce function new uploads will get the area number - as fileecho name so they will be announced by area. - - - -v0.33/b6 30-Apr-1999 - - common.a: - Execute now only logs result messages if there was an error. - - mbaff: - Added High ANSI to Low ASCII translation for echomail areas - that need it. - - mbsetup: - Added High Ascii switch in filefind setup. - Corrected menu numbering. - - mbfido: - After tossing a .pkt the result is only logged if there was - an error. - Removed 2 debug messages during netmail import. - Made logging of "Keep files" final. - Allowed hi-ascii in .tic files for the descriptions. - Build in a check for multiple "Desc" lines in .tic file, - only one is allowed. Offenders are logged, See FSC-0087. - - mbsebbs: - Quick_Bye() is now logged (if possible). - - mbdiff: - The resulting new archived nodelist will now be a lowercase - name instead of a uppercase name. - The new nodelist will be default be archived with the same - archiver as the diff file came in, if it's not available - there is now a fallback to ZIP which is always available. - - -v0.33/b7 10-May-1999 - - upgrade: - ACRmail 0.60 file naming convention is default off for - existing nodes, check their setup. - - msgbase.a: - Added a counter which keeps track of the size of the message - being written. - - common.a: - Will now create unique arcmail names for out of zone mail if - it is turned on. This should prevent creation of duplicate - arcfile names to the same node. - Corrected logging of bestaka_s function. - Doesn't create 00000000.fr0 ARCfile names anymore if our - system is the point sending to the boss. - - mbaff: - In the announce function added logging of the size of the - written message. - Inserted a checkpoint log after each announced block. - Inserted code to split messages after 13000 bytes. - - mbfido: - Removed "Packing Mail" logmessage. - Imported netmail will now allways get the Private status. - Added code to replace the archive comment, currently this - works with .zip and .rar archivers, others don't support - this. - The ^aVia line was inserted at the begin of a forwarded - message instead of at the bottom, it also had the address - of the origin system instead of our own system. - Also moved the ^aVia line in the other 2 functions to the - bottom. - - mbfile: - If during the check for missing files in a download area there - is an extra file and it is not a regular file, it wil be - ignored. This allows the use of subdirectories. - - scripts: - Added support for binkd, if it is installed in ~/bin and the - binkd.cfg is in ~/etc it will be started and stopped as the - rest of the bbs. - - mbsetup: - Added in nodes setup ARCmail 0.60 naming convention switch. - - mbcico: - When there are session errors, the status counter is now - increased with 5, so maximum 6 calls are done. (was infinite). - - -v0.33/b8 23-May-1999 - - mbfido: - Corrected Connection time log messages. - - mbcico: - Restored the original filetime functions. - Removed 2 debugging log messages. - Made the filerequest processor 3 times faster. The remote - doesn't timeout anymore during the search for files. It - must still be made faster. - - mbsetup: - Added the (hidden) option to move echomail areas. - - mbout: - Will also clear the status record of a node with the poll - command if the reason was session errors. - - mbdiff: - Changed available archiver tests, and fallback to ZIP - archiving. It is finally working. - - mbsebbs: - Corrected the reply test for new users when they had entered - their name. - Updated language number 413. - New users won't see the "new files" when they logon the first - time. (They saw all the files on the bbs). - If IEMSI login is aborted or failed, IEMSI won't be used - anymore during login. - When the offline reader packs netmail, only personal mail is - now added to the dowload packet. - - -v0.33/b9 12-Jun-1999 - - update: - Change scripts that call mbuser. - - general: - Changed startup and finish logging of all programs to use - one style. - - mbaff: - New file reports that are splitted over several messages will - now report the right report totals. - Removed some development debugging logs for splitting messages. - - mbdiff: - Removed all extra debugging logs from version beta-8. - - mbuser: - Made command syntax and helpscreen as in all other programs. - This affects the scripts. - - mbsebbs: - For the "comment to sysop" function the .quote file in the - users homedirectory will now be truncated to 0 bytes to erase - its contents. - The "mailout" semafore is now only set at the end of the user - session. - Inserted the Nopper() call in the fullscreen editor to prevent - server timeout when writing a long message. - When writing a netmail to an unknown node, the user must verify - to send the mail anyway. New language prompt 241. - If a user is short with transfertime for a download, it will - be written to the logfile. - - mbfido: - The notify function will now only include areas that are - "Active" in the reports. - Changed the ASCII filtering of reading .tic and FILE_ID.DIZ - files, High-ASCII characters are not lost anymore. - The packet password is now only checked if the originating node - is in our setup. - Before processing AreaMgr and FileMgr messages the right - noderecord is loaded again in case it was replaced. - - -v0.33/b10 19-Jun-1999 - - general: - The man pages are removed. - - mbfido: - Removed logging of file descriptions. - Changed logging of replacing archive banner. - - mbaff: - Removed logging of splitting messages. - Removed several other debugging logmessages. - - mbsebbs: - Removed some debugging logging from download functions. - Corrected a logmessage for new users, language line 66 - is now obsolete. - - mbsetup: - Included (Spacebar = toggle) message in yes/no switches. - - mbuseradd: - Removed the creation of .profile in the users home directory, - this is not necessary because the users shell is mbsebbs. - - -v0.33/b11 29-Jun-1999 - - Most fixes in this release are from Jan van de Werken who is beta- - testing v0.33/b10. - - upgrade: - In mbsetup menu 1.14 set new fields 21 and 22. - In mbsetup, enter menu 8.5, set security levels for transfer - protocols and save the database. - - general: - Added 2 global setup integers for splitting newfiles reports. - - common.a: - Removed Getstr() function. - - mbfido: - Changed AreaMgr and FileMgr message body checks, lines with - more than 1 space or tab and empty lines are skipped. - Removed debug logging for import local netmail. - - mbsetup: - Added in menu 1.14 setup for newfiles reports message split - at a gently size (after a group of files) and a forced - message size. - In nodes setup, new records now default have Advanced tic off. - In nodes setup corrected several numbering errors. - New defaults for global configuration by Jan van de Werken. - To confuse all non-Unix users, all file attaches seem to - come from our A: drive. - Corrected a lot more wrong screen numbers. - - mbaff: - Implemented gently and hard splitting newfiles reports using - the global setup. - - mbsebbs: - Rewrote all user input functions. They should beep now if - the user does something wrong. - Changed the GetPhone functions, the format is not fixed - anymore and it accepts only 0..9 + - characters. This should - work in all countries now. Minimum length is 6 characters. - Changed the language prompts 45, 47 and 48. - Language prompt 46 is not in use anymore. - Removed the logdate2 function, it wasn't used. - Added GetstrP() function (instead of Getstr() in common.a). - Change transfer protocol now checks for the proper security - level. - - scripts: - Updated most scripts, added more comments, added tests to - see if MBSE_ROOT is already set, style fixes. - - -v0.33/b12 08-Jul-1999 - - general: - Removed creation of .VERSION file from the main Makefile. - - mbfido: - The echomail areatag is forced to uppercase. - Removes stale FILE_ID.DIZ files before processing a new one. - - mbsetup: - The new fields 1.14.21 and 1.14.22 where placed at the wrong - column on the screen. - Changed the default values for gently and forced message split - to 27 and 30 KBytes. - Corrected a missing linefeed in sitedoc protocols listing. - Corrected a menu error in menu 8. - Corrected placement of menu item 1.4.11 - Some cosmetic changes in the sources. - Corrected help message in screen 7.x.23, caused mbsetup to - crash. - - mbsebbs: - The info screen now displays compile date and time. - The Area listings for file areas and message areas now break - lines at column 79 and send cr/lf at the end of the line. - Also, area numbers increased to 5 digits (was 3). - Added cr/lf to language prompt 220 in mail.c - - lang: - Shortened prompt 220 with 1 character. - - -v0.33/b13 28-Jul-1999 - - general: - Added structure for file request index. - - update: - Run "mbfile index" once. - Include "mbfile index" in the maint script. - Modify "run_inout" script to start "mbfile index -quiet" if - the semafore "reqindex" is present. - Modify "run_inout" script to replace the fixed .pkt filenames - with stdin from the mbseq program, ie: 12345678.pkt will - become `mbseq`.pkt - Set the filerequest limits in menu 1.17.22 and 1.17.23 - You may specify portspeeds above 57600 in the tty's setup. - - common.a: - Corrected a comment in pktname.c - Changed error logging in execute.c - Moved execsh() from mbcico into common library. - - mbcico: - Removed some debugging logmessages from yoohoo.c - Changed some debugging logging from 'Session' to 'EMSI'. - File request response messages now contain MSGID, PID and TZUTC - lines and request limits. - Filerequest limits implemented. - Filerequest search now uses the index file created by mbfile, - should be fast enough now. - Moved execsh() to common library. - Magic execute request result is now send by mail instead of - an ASCII textfile. - Made some changes in zmmisc.c according to ifmail-2.13, sessions - with D'Bridge 1.58 seems to work now. - Logging of "chat: read return -1" suppressed, this is most of - the time caused by modem hangup during dial and is not a real - error. - During outbound scan missing directories will be created. - A major error in callall.c prevented crash arcmail to be sent. - Rewrote all functions that created mail, less disk I/O. Also - made the .pkt headers the same as the mbfido program did. - Will now handle serial port speeds upto 4000000 baud if your - hardware can handle that. - - mbsebbs: - Finally implemented user access flags. - Removed some debug logging. - Changed "Terminated on SIGALRM" error logging to normal log - with "User inactivity timeout" message. - - mbsetup: - In edit users toggle of flagbits is now correct, no "notflags" - anymore. - Added setting of filerequest limits in menu 1.17 - Changed fieldlength for integers to 7 digits. Now you can - enter all available portspeeds in the tty setup. - - mbfile: - New command: index. This will create ~/etc/request.index - which contains a sorted index of all requestable files on - your bbs. This index is used by the mbcico request processor - to speed up the filerequest search. The "reqindex" semafore - is removed when it is finished. - - mbfido: - Creates "reqindex" semafore if there were files imported. - The check for stale FILE_ID.DIZ files was at the wrong point. - Will pack the mailqueue if the temporary .pkt file is bigger - then the maximum size of that .pkt and creates a fresh one. - - mbseq: - New program. Write a 8 character hexadecimal unique sequence - number to stdout. This can be used in shellscripts to create - unique filenames. The sequence numbers are fetched from mbsed. - - -v0.33/b14 16-Aug-1999 - - general: - This is the first public release. - - mbcico: - Revised zmodem protocol, changed timers etc. Used latest - information (Aug 1999) found at Omen Technology's ftp site. - In the openfile function added support to skip files already - present in the inbound. - Hydra and TCP protocol transmitters now send the filetime - rounded up to even seconds just like zmodem already did, so - the filetime is always the same on DOS (Fat) as on Unix - systems. - Zmodem will now skip files already present in the inbound. - Hydra will now skip files already present in the inbound. - TCPproto will now skip files already present in the inbound. - Changed EMSI debug logging, should be more clear now. - Does finish zmodem session with D'Bridge [1a] 1.58 now. - - scripts: - Added support for UPS. The UPS software should set the - semafore "upsalarm" when it's running on battery power. Most - utilities will the not run anymore to prevent data-loss. - The semafore "upsdown" should be set just before the UPS - starts the real shutdown. This will force the mbstat program - to timout after 30 seconds. - - mbstat: - The wait command will only wait for 30 seconds instead of - one hour if the semafore "upsdown" exists. - - -v0.33/g1 01-Sep-1999 - - general: - Many brave souls have downloaded and tested the previous - version. Most changes in this release are bugs found by all - these people. - Added checks in the Makefile to test the MBSE_ROOT variable, - written by Jan van.de.Werken. - Added checks in some Makefiles for root privileges for - make install. - - upgrade: - Enter mbsetup 1.1.10 and set the name to "bbs". - Check UnSecure switch in echomail areas. Should be off unless - you need it. - Remove the line LOGDEBUG from $MBSE_ROOT/etc/client.conf - - common.a: - Added the original copyright in for the 32 bits crc code. - Checking .pkt header now checks valid system aka's. - Removed reading LOGDEBUG from ~/etc/client.conf, wasn't used. - Added SigName for Alpha CPU (not tested). - - mbfido: - Removed debug message in addpkt. - Added 2 extra DeleteVirusWork() calls in tic processing at - points where processing is aborted and left the temp directory - with unwanted files. This also happened when a virus was - detected. - Will now import echomail from points who are connected to - the normal nodenumber instead of the hub/host number. - Will now try to import bad netmail into a netmail directory - instead of losing it. - Changed the check for received echomail, the sending node - must be in the export list, unless the msg area UnSecure flag - is set. - Implemented the connected systems Excluded flag for echomail - connections in import/export echomail. - Implemented the connected systems Excluded flag in the AreaMgr. - The Notify function now also sends statistic reports to the - node. - Fixed a routing problem (I hope) for out of zone routed - netmail. - When scanning outbound netmail the domain field is zeroed in - the destination address to prevent garbage in the domain field. - Patches by Jan van.de.Werken, files import now set the name to - FileMgr instead of sysop's name. - AreaMgr and FileMgr generated messages now have AreaMgr or - FileMgr as "From" name instead of the sysop's name. - - mbcico: - Restored some zmodem code that was changed in beta-14. - Added some other code for error handling (Carrier lost). - Zmodem file transfers are streaming again. - Added a tty flush in the TCP/IP transmitter. - Solved the EMSI handshake problem with T-Mail mailers. - - mbsetup: - Added menu 1.1.10 to setup the name of the bbs startup - account. The default is "bbs". - Changed ImpSeenby switch in UnSecure switch in message areas - setup. - In message areas the Excluded flag is added to the systems, - you can now disable a node from an area if a moderator wants - that. - In edit users added a switch to toggle OLR Extended Message - Info in OLR download. - - mbsebbs: - Now reads the bbs startup name from the configuration instead - of using the hardcoded name "bbs" - Writes a door.sys dropfile in users homedir. The first line is - fixed to COM0 forcing doors to run in local mode. The second - line is 0, meaning 0 baud is local mode. Let's see how this - works. - Added some logging for the OLR upload function. - Now tests lowercase filenames also for reply packets created - by MultiMail. - Now includes the ^aMSGID string in BlueWave download messages. - Optional includes all other kludges in BluwWave download. - - -v0.33/g2 02-Oct-1999 - - general: - Moved the mbsed back into this archive. Included the new - installation procedure. - Moved the example files into this archive. - - upgrade: - Remove $MBSE_ROOT/bin/fbgen. - If you want to switch off CFG.dospath, be sure your outbound - is empty or mail and files will get lost!!! Thus: type - "mbout stat" and see if nothing is there before you do that. - - common.a: - Patches by JvdW, if CFG.dospath is empty then fileattaches - will contain Unix style filenames, otherwise the ataches - are translated to DOS style. - - dbase.a: - If SearchTic and SearchMsg function the area must be active - in order to be found. - - mbaff: - Removed a bug in scanning uploads function that created empty - lines in the toberep.data file. Also forced the long - description strings to be no longer then 48 characters. - - fbgen: - Finally fixed this one. Can now read multiple description - lines from files.bbs. Renamed to mbfbgen. - The dangerous gets function is replaced. - - mbsetup: - The edit path function now checks if the directory has read - access instead of write access, it might be on CD-rom. - - mbfile: - Skips the kill and pack functions on CD-rom areas. - Skips the check of files on disk against the database on - CD-rom areas. - - mball: - Doesn't create 00index files on CD-rom areas anymore. - - mbcico: - More bugfixes in TCP protocol. Better error handling for - disconnected sessions. - Creates inbound tmp directories when they don't exist. - Now presents the EMSI info from the tty records if - possible. - - script: - Corrected a syntax error in the maint script. - - mbfido: - The areamgr and filemgr names are not hardcoded anymore, - the names presented are the first names defined in the - setup. - Outbound processing now also works if CFG.dospath is empty, - then Unix style fileattaches will be created. - Rewrite of file import function by JvdW to fix some bugs. - FileMgr and AreaMgr global connect and disconnect now - check if the area is set to Active. - Rewrote ARCmail naming, zero length archives older then - 6 days are deleted. If a zero length archive then still - exists, the extension number is bumped. This should - prevent using the same archive name on the same day to - nodes with more then one mailsession each day. - - -v0.33/g3 18-Oct-1999 - - general: - Ideas for generating ARCmail names by Sean Rima and JvdW - implemented. - Lot's of cosmetic stuff to make commandlines, help screens, - more clear and the same for each program by JvdW. - - update: - In mbsetup 1.14.15 check that this is zero or the number of - old days you want echomail rejected. - Check in mbsetup nodes->mail that "ARCmail a..z" is off - for nodes that can't handle that. - - mbcico: - File attaches that are no longer on disk are now correctly - removed from the flo files. Changed logging for this. - The scanout function now removes truncated ARCmail files - that are not of the current day or are older then 6 days. - Corrected a bug that the inbound directory wasn't created - when it didn't exist. - - mbsebbs: - Now allows netmail crash replies. - Can now reply netmail that came in via the UUCP gateway, - when the reply is saved the message is readdressed to the - gateway. - Disabled the download transfertime check before starting a - download. It gave unpredicteble results if the users previous - download cps was bad for some reason, the user couldn't - download. - - mbsetup: - New menu item in 1.14, "Reject old", to reject incoming - echomail older then this number of days, or zero to not - check the age. - In nodes->mail setup added a switch to allow a..z - ARCmail archives extensions. - Made editing log (debug) switches more clear. - Some editing keys now beep if you do something wrong. - - mbfido: - The pack function now supports 'a..z' ARCmail extensions - if this is on for that node. - It's possible to reject too old echomail. - Short commands and options now displayed in the help. - The fileforward netmail now set's the filemgs name first - character to uppercase. - The uploader name with file import now only has one - name anymore, the first character is capitalized. This - line should not be too long, this gives ugly listings. - System aka's in the same zone other then the aka of echomail - area are added to the seen-by lines. - Added experimental zonegate support for echomail. - Removed some debug logging in tic processing. - - mbaff: - Short commands and options are now possible, like other - programs already did. - - mbout: - Short commands and options are now possible, like other - programs already did. - The scanout function now removes truncated ARCmail files - that are not of the current day or are older then 6 days. - Suppressed the help message for file attach, it is not - yet implemented. - - mbfile: - Short commands and options now displayed in the help. - - mbmsg: - Short commands and options are now possible, like other - programs already did. - - mball: - Short commands and options now displayed in the help. - - mbstat: - Short commands and options are now possible, like other - programs already did. - - mbfbgen: - Handles files.bbs lines of 255 characters instead of 80. - - -v0.33/g4 05-Nov-1999. - - mbfido: - The final seenby lines are deduped and sorted before writing - them to the in and exported echomails. - Areamgr and Filemgr messages now have a capitalized first - "From" name character. - Areamgr new function: flow reports. Can be requested by - %flow and is automatic generated with notify reports. - Areamgr, increased the area tag from 20 to 25 characters - in the notify reports and %list, %query, %unlinked response - messages. - Corrected a bug creating garbage at the end of the magic - execute commandline. - - mbsebbs: - Reply to UUCP gateway didn't work in real live, it seemed - that the official UUCP gate had no ':' character after the - REPLYADDR and REPLYTO kludges, while my testsystem running - ifmail 2.12 for the gate does. I now test both cases. - - mbcico: - Implemented remove ARCmail older then n days. - - mbout: - Implemented remove ARCmail older then n days. - - mbsetup: - Added integrity check for edit message groups. - Added integrity check for edit fileecho groups. - - -v0.33/g5 13-Nov-1999. - - upgrade: - Edit /etc/inetd.conf to add "-t ifc" for standard ifcico - protocol, "-t itn" for telnet protocol. - If you don't use the original binkp mailer, you may want to - add entries for the binkp protocol, this will show the - remote that you don't support the binkp protocol. - The installation scripts are updated. See the file SETUP.sh - on how the files /etc/services and /etc/inetd.conf should - look like. - - mbcico: - Implemented "not supported" binkp protocol. - Revised commandline parameters, in TCP/IP slave mode the - mode must be given on the commandline, -t ifc for standard - ifcico protocol, -t itn for telnet protocol, -t ibn for - binkp protocol. - Starting mbcico without arguments will show the help screen. - Now all programs do that exept the mbsebbs binary. - - mbsebbs: - Changed language prompts 214 and 215. - Added language prompt 46. - Added message export to file function. The file will be saved - in the users private homedirectory, the filename is created - as _.msg in MS-DOS format. - Corrected display header of users home directory file list. - Added import file in message function, the file must be in the - users private homedirectory. This only works in the fullscreen - editor. - - mbfido: - Inserted 2 sync() calls during mailtoss. I hope this prevents - temporary missing archives and .pkt files. - New command, "tag", writes areas tagfiles for each mail and - tic file group to the ~/doc directory. Filenames are automatic - created. - - mbsetup: - In edit tic area and edit message area editing of connected - systems now uses the existing node setup. - Made a new menu selector for areas with Global and Move - options. - Implemented new menu selector in message and tic areas select. - If you jump directly to a message or tic area with select, the - offset is recalculated to that area range. - Added global editing functions in message areas setup. Functions - are add, delete, change connected systems, aka to use and some - other settings. - Edit a nodes aka's is checked if these aka's are used in tic - and message areas. - Delete a node is checked against aka's used in tic and message - areas. - -v0.33/g6 22-Nov-1999 - - mbsetup: - Removed a bug where you could not add new aka's to nodes due to - the aka's checking. - With database intergrity checks the cause of blocked actions - is now logged in mbsetup.log - If you change the number of connected systems or maximum groups - in global setup, the databases affected will be automatic - updated. - - mbfido: - When writing a notify message to selected nodes all other nodes - received status messages. - Corrected uploader name, removed "BBS" string. - Installed patches from JvdW in file forward to correct some - segfaults with the subject variable. - The local hatched files are now moved to the inbound so that - the unarchiver programs can find these files. - - mbcico: - Added very experimental binkp protocol. Handle with care and - at your own risk. This isn't finished yet. - - SETUP.sh: - Fixed the script, there was one "fi" missing so the script - crashed and didn't do all changes. - - -v0.33/g7 05-Dec-1999 - - mbcico: - Fixed some logging in binkp protocol. It works for normal - mail and files transport. - - mbsebbs: - Export message to users work directory did not put the - message in the work directory but in the home directory. - - mbfido: - Netmail to unknown bbs users are now readdressed to the - sysop. Should be a bounce message. - Added a experimental test for empty imported netmails. - The netmail area Private flag is checked to see if we keep the - original Private flag or force imported netmail to Private. - - -v0.33/g8 12-Dec-1999 - - general: - Changed the Makefile, make zip now puts FILE_ID.DIZ in the - root of the directory tree so that file processors will - find it now. This is a version of this file. - - common.a: - Removed and changed nodelist lookup debug logging. - - mbuseradd: - Now check the existance of the users home directory, if it - is found then it is removed before the home directory is - created again. This fixes problems with RedHat 6.1. - - mbfido: - Global AreaMgr commands cannot disconnect message areas anymore - that are mandatory. - Removed some routing tracking debug messages. - Added check to see why not connected echomail is imported to - the netmail of the last user in the userbase. - Changed check to "Sysop of z:n/n@network" to readdress to - the sysop's real name. - After readdress a netmail to the sysop, the usersearch is now - done again. - If locking the message base during import fails, import is - aborted. - - -v0.33/g9 18-Dec-1999 - - upgrade: - If you ever used DOSEMU then do a rm -Rf .dosemu in each users - home directory. The ownership of these files are changed so - they are created again when the user runs a door for the - first time. - If you have created ttyinfo records with just digits in it - for the /dev/pty/0 type tty entries, you need to change them - to pty/0 type entries. The example etc files are now containing - these entries. - - general: - All sources recompiled with memwatch. I will not name all - places where I found memory leaks, it was a lot. Still busy - finding them, but most programs are allright now. - You can turn memwatch on and off in the file CONFIG. If you - change it, do a "make clean" before recompiling the sources. - Changed my Fidonet address, the testsystem is listed now and - removed my old e-mail address which was not valid anymore. - Changed the installation script. - For RedHat 6.1 and newer a different /etc/rc.d/init.d/mbsed - file is created then before because the su command behaves - different. The install script will try to detect this. - Thanks to Juergen Heisel for finding this problem. - Changed more startup and shutdown scripts. - Changed language prompts 306, 311 and 324 to reflect - GigaBytes storage instead of MegaBytes. - Changed language prompt 327, it had a space too many at the - end. - - common.a: - In the attach function implemented the global leavecase - switch to be able to turn off the forced uppercase for - file attaches when dos translation is on. - - mbfido: - Found a bug where mbfido ran out of file descriptors during - toss, only about 1012 messages were tossed and then the whole - thing started tossing everything to bad. Jim Hansen who - reported the problem, reported that tossing 37500 messages - now works fine. - Added the commandline switch -unsecure to be able to run an - unsecure toss, ie. no originating checks are performed. - Handle with care. - Forwarded netmail packets got the wrong from address in the - .pkt header. - Added fsync calls after every write to a message packet. - When writing .tic files to other nodes now the real aka of - the tic area is used in the From address instead of bestaka - match of the destination. - All system aka's in the same zone are now added to the .tic - Seenby lines. - Will now gently stop processing if the upsdown semafore is - detected. - Added a check with file import that there are no more then - 25 description lines. - - mbsebbs: - Added new controlcode, ^KM displays the users lastread pointer - in the current message area. - When reading new mail at logon, the users lastread pointers - are not updated anymore in echomail/news areas to prevent that - the users skips unread messages. - Only if a message area is Public/Private and a reply is given - the user gets the question Private y/N. On other cases the - flag is automatic set. - With netmail reply if enough security level a file may be - attached. - The door.sys dropfile date formats are now fixed. Depending - on the menu settings it can be original (pre 2000) format or - have four digit year numbers, the new style. Writing the - dropfile can also be suppressed. - Removed the setuid calls before and after running a door, - mbsebbs now always runs as user "mbse". - The $HOME environment variable is now forced to the users - real home directory, even if mbsebbs is started as user bbs. - When the user logs in, the existance of the subdirecties - .dosemu/run and .dosemu/tmp are created in the users home - directory if they don't exist. DOSEMU is happy with that. - Because of this, all files in the users directories are now - only owned by user mbse. - Moved the setup of last message and file area to a later - startup point in userlogin. - Autoexecuted menus are now also checked for user security - and user age. - Fixed the screen output of several bbs list menus. - Now handles the /dev/pty/0 device names found on newer - Linux distributions. - It will now also create the necesary subdirectories for the - /dev/pty/n devices. - - mbaff: - The written messages statistics counters always counted at - sunday in januari. - - mbmsg: - Added message post from a file function. - - mbsetup: - With the filebase editor I got segmentation faults on a Sun - Sparc machine, changed the filedate calls. They show up the - local time now also. - Added the global editor for the tic areas. - Added in menu 1.3 a switch to leave to case for .flo files - original, ie. not forcing it to uppercase. - Added menu creation in menus setup. - Added setup to suppress the creation of a door.sys dropfile, - and the ability to write the years in four digit format in - the door.sys file. Newer doors seem to understand this. - Added delete menu item in menu setup, finally. - Added menu item move. - The menu editor now shows the autoexec menus with the - lightred lowercase "a" at the selection key position. - When a new config.data is created, the default loglevels - are now set to normal values. - - mbcico: - Forgot to implement the NoTCP global and per node flag. - If you are not permanent connected to the net, use these - to prevent the use of internet protocols. - - mbmon: - Screen 5 now calls Nopper() to keep the server alive. - Corrected screen display numbers 5 and 6. - - -v0.33.10 24-Jan-2000 - - general: - Changed version numbering. From now on, minor odd numbers - are testversions, even are stable. Same as with the - Linux kernel. - Changed the setup script, it should now detect SuSE systems. - This is not tested. - - update: - Remove (as root) all bbs users from /etc/ftpusers. They are - not needed (and never were). - Compile and install this release. - Kill mbsed (killall -9 mbsed). - Edit $MBSE_ROOT/etc/mbsed.conf, remove the line with logdebug - and the commentlines above. - Start mbsed again (/opt/mbse/bin/mbsed). - Then start mbsetup, open the global menu 1, and exit. Answer - yes to update. - If you have any echomail passthru areas, give them a - message base path. Passthru doesn't exist anymore. - - common.a: - The file_crc function now supports the usleep(1) code - for background processing. - The logfunctions now replace and with spaces. - - msgbase.a: - Corrected a bug in the Pack function when the headerfile - was corrupt. If the header is corrupt, the index file is - used to find the right recordposition again. Errors are - logged. - - mbsed: - Removed the logdebug loglevels. Logging is fixed now. - Changed the answers for the SBBS command. - - mbsetup: - Added a global setup screen for the ftp server. - Added a switch in the menus setup for doors to set a flag - to create door.sys files for dosemu/Vmodem use. - Revised the message area setup screen. - Changed text's in global mailer setup to indicate that the - mailer flags are for TCP/IP connections. - - mbuseradd: - Doesn't add usernames anymore to /etc/ftpusers. This is not - needed for standard ftp security. - - mbcico: - Added send filerequest to the binkp protocol. In single - batch mode, you need to connect a second time to get the - request response. This is normal single batch behaviour. - Nodelist flag for Binkp mode is XX. (For POTS/ISDN XA). - Added received filerequest to the binkp protocol. In single - batch mode this will put the files on hold. Multiple batch - mode works now but is only tested against another mbcico - mailer. - Calling internet nodes could not use a forced hostname or - IP address. Fixed. Added search in nodes setup phone - fields for hostname/IP address, search in nodelist location - entry (2 nodes on the world do that, I needed one of them), - and the IP notation in the nodelist phone field (000-...). - Hostnames after the flags are not resolved, hostnames - should be in the system name field. - In the binkp protocol the flags from the global mailer - setup are sent as our flags. - - mbsebbs: - The next two pathes are from Ken Bowley. - Changed the fullscreen editor with patches from Ken Bowley. - Improved behaviour for inserting and deleting text. - Changed the door.sys creation, if the COM port option in - the menu files is on, the door.sys file writes COM1 in - it with a portspeed of 115200. This is for running doors - under dosemu and a patched Vmodem. - Made newmail scan and other checks for personal mail case - insensitive. - The fullscreen editor source now has an extra define FSEDIT - to enable heavy debugging logs. - It didn't respect the BBS closed status on lines that did - not honor ZMH status. - Removed "Re:" debug logging from mail.c - - mbfido: - Corrected the queue path for tic passthru areas, the - destination path missed a /. - Delete file from the inbound with passthru areas is now at a - later point. - Removed the message passthru switch, you needed and area - anyway. - - mbstat: - Corrected screen output when it was waiting for the bbs to - close. - - mbftpd: - New! Special ftp server for MBSE BBS. Should use BBS users - access restrictions etc. Doesn't work yet so don't use it. - It is included in the distribution, but not compiled or - installed. - - -v0.33.11 07-Mar-2000 - - upgrade: - Change the CLIENT line in ~/etc/mbsed.conf, the authcode must - now come behind the hostname. Remove the AUTHCODE line. - Kill the old mbsed, start the version from this version. - The same changes must be made to ~/etc/client.conf - Run mbsetup, goto 1.17 and 1.18 and set it up for your system. - Check the QWK area names in the message areas: if there are - areanames longer then 13 characters edit them so that they - fit in the 13 characters limit. In previous versions this field - was 20 characters. - - general: - Added global config to create www pages for downloads. - Included the mbftpd directory in the main Makefile. Don't use - the mbftpd program yet! - Updated the documentation, some parts were 2 versions behind. - - common.a: - Execute external programs now lowers process priority to 15, - and restores to 0 after execution. This should make running - (de)compressors and other utilities "nicer". - If a client fails server authorization, it will now proper - close the server connection. - - mbsed: - The syntax of the client lines in mbsed.conf is changed, - multiple lines are now allowed, hostnames and authcodes must - be on one line now. - It is now possible to close the connection when not authorized. - Minimized the number of response codes. Updated the - documentation. - - mbsetup: - Added global setup menu for the html pages creation. - The length of the QWK area names in the message areas setup - is changed from 20 to 13 characters for the QWK specifications. - Removed selection of menu number 216 from the menu editor. - - mball: - The index command now also creates index.html files for web - clients. The index files are stored in the download directories. - If a download directory contains .gif or .jpg files then - thumbnails will be created and the thumbnails will be used in - in the index.html files. - You need "convert" of the ImageMagick package to use that - future. - - mbfile: - Added 'index*' to the list of filenames that isn't checked - with the mbfile check option. - Pack and Move file functions will now also delete or move the - thumbnail files. - - mbcico: - Changed the binkp receiver timeout code to prevent a hanging - receiver. This only happens sometimes on a Sun Sparc (and - still does). - Changed the modem chat logging. It is now visible what is - really send and received from to the modem. - - mbsebbs: - Added wordwrap in the fullscreen texteditor. Patches by - Ken Bowley. - Replaced hardcoded prompts in offline.c with language prompts. - New prompts are 66, 228, 229, 256, 260, 277, 297, 338, 374, - 377, 391..397, 411, 425, 439..460. Replaced a language prompt - in the Language load function with a hardcoded message. - Removed menu option 216, download pointmail. - Added QWK download and upload. Not fully tested yet!! - Added ASCII download. - File descriptions with color info will now be displayed in - color. - - mball: - File descriptions with color info suppresses the color info - in the all/newfiles listings and 00index files. - - -v0.33.12 24-Apr-2000 - - upgrade: - After compiling and installing set the amount of free - diskspace in mbsetup menu 1.4.22 to your choice. - Kill and reload mbsed. - If you use the web interface for the file areas create - the directory css in your webserver document root and copy - files.css from the distribution archive in it. Then run - mball index. Customize files.css to your taste. - - general: - Changed the ~/tmp/scan.mail file to ~/tmp/echomail.jam and - ~/tmp/netmail.jam in the standard JAM format. - Added file README.GoldED - - common.a: - Added function to check for free diskspace on ext2, msdos and - vfat filesystems, except floppies. - - mbsetup: - New nodes now have "Notify" default off. - Renamed menu 1.4. - Added minimum diskspace setting to menu 1.4. - Added force FNC switch to the nodes setup. - - mbfido: - Exported netmail are checked until any tearline, not MBSE's - tearline alone. - If exported echomail doesn't have a ^aPID kludge, the ^aTID - kludge will be inserted anyway. - Removed some debugging info from the ARCmail pack function. - When netmail to points is written with GoldED there was no - ^aTOPT kludge. Any missing ^aTOPT, ^aFMPT and ^aINTL kludges - are now added if they were not found during mailscan. - The unarc/viruscheck directory is now completly removed after - use and created again. Sometimes files with strange names - were left behind with a normal recursive remove. - Now checks at regualar points the free diskspace. Execution - aborts if it is too low. - - mbsebbs: - Inserted ^aINTL: kludge instead of ^aINTL without colon. - Corrected the users age calculation, the users age increased - one month after his birthday. - - mbsed: - Added some fsync() calls to ensure disk writes. - Now starts logging reginfo locking after the fifth attempt. - - mbcico: - Made some small changes to the binkp batch function. - Added free diskspace check during outbound calls. - Added BSY command support for binkp during file transfer stage. - Changed binkp timer reset points during file transfer stage. - The binkp receiver now checks diskspace before accepting a - new file, it sends BSY if too low to the remote. - If in nodes setup the FNC flag is set, the binkp protocol - will now send old 8.3 uppercase filenames to the remote. - - mball: - The WWW pages now include a stylesheet so it is more easy - to create a personal look and feel for the pages. The - stylesheet goes into htdocsroot/css/files.css An example - is included in this distribution. - - mbaff: - Added free diskspace check. - - mbindex: - Added free diskspace check. - - mbdiff: - Added free diskspace check. - - mbmsg: - Added free diskspace check. - - mbuser: - Added free diskspace check. - - -v0.33.13 12-Jun-2000 - - upgrade: - Make all files and install them as root. - If you use GoldED or other mail utilities as another user - change $MBSE_ROOT/sema and $MBSE_ROOT/tmp to mode 777. - Kill mbsed with signal 9. - Now start mbsed again (/opt/mbse/bin/mbsed). - - general: - The install script now sets the $MBSE_ROOT/sema and tmp - directories to mode 777. - Updated the internet news gate documentation. - - msgbase.a: - Now creates all JAM files with mode 0666. - - mbcico: - The binkp driver skipped aka's when the node number - was zero. - Changed on hold logmessage. - - mbfido: - When forwarding a netmail, a temp file was closed twice, - this caused a segfault on glibc-2 systems. - In the logfile areamgr notify messages had the same orgin - and destination address. - - mbsed: - Changed the signal handlers. It will now allways try to - cleanup lost clients. It will also not hang anymore when a - client aborts for 10 minutes and use 100% cpu time. - - mbsebbs: - Changed logging in filearea select. - Permanent removed download checktime function, this was - already off. - Added error logging for setting filearea 0 during logoff. - Only netmail replies via an internet gate are now readressed - to a UUCP address. - - -v0.33.14 03-Jul-2000 - - upgrade: - Read this section carefully!!! This is a large update. - Backup the whole BBS configuration. - Compile and install all programs. - Kill -9 pid of mbsed. Restart mbsed. - Delete file ~/var/mailer.hist - Delete in all outbounds the *.sts files. - Start mbsetup, set item 1.5.14 if you want new users to - get an email box, you should do this. - Set 1.13.4, 1.13.5 and 1.13.6 to the node where the pop3, - smpt and nntp servers are, normally this is "localhost". - Set 1.13.10 to the Fidonet aka you will use for incoming - and outgoing email via the Fidonet UUCP gate. - Set 1.13.11 to the node address of the Fidonet UUCP gate. - Set 1.13.12: use "No ISP" if you dont't have internet - access, you will then use the default Fidonet UUCP gate. - Set it to "Dial ISP" if you connect sometimes to the internet - of have a cable modem without a DNS entry. Set it to - "Perm ISP" if you have a permanent connection to the internet - and you system has a valid DNS name. - With mbsetup open the userbase, close it and answer yes to - the save question. If you want existing users to have - private email, set 15.36 for each user to yes. You should - do this to accept email from the UUCP gate. - Open the message areas setup (9.2), exit and answer yes to - the save question, this will update this database. - Remove any existing email areas in the normal mail setup, - menu 9.2 (you should not have had any yet). - With mbsetup open menu 16, this will add the default services - database. Add entries as needed. - With mbsetup open menu 17, this will add the default domain - translate database. Insert entries as needed. Move the new - entries so that the .fidonet .ftn translation is the last - entry. - Go back to the start of this section and check! - - general: - Introduced users private email. Each user has (if set) three - email boxes: mailbox, archive and trash. - New system settings GiveEmail, POP3 host, SMTP host, Email Aka, - UUCP gate aka and Email mode. - New menus for email: 216 Read email, 217 Post email, 218 Trash - email, 219 Choose mailbox, 220 Quickscan email. - New user settings Email and plain password. - All users can now have private email boxes. - In normal mail areas you can't create email boards anymore. - Some documentation is updated for new features and some - changes are made to explain some things better. - Added a services database. These are mail accounts that can - perform certain actions. - Added domain translation database, this will translate fido - domains to internet domains and back. - Changed the message areas to contain newsgroups information. - - common.a: - The nodelist lookup function didn't recognize the internet - protocol flags followed by a colon and portnumber. - Move some functions from mbfido and mbmsg in here. - Added characterset convertor from ifmail. It uses the same - maptabs. - Moved some other functions into this library. - - mbinet.a: - New library, internet protocol interfaces. Has interfaces - to SMTP, NNTP and POP3 protocols. - - msgbase.a: - The MsgIdCRC and ReplyIdCRC values were not set in the message - headers. - Added protection for too long subfield strings. - Made some stringlengths longer, following JAM specs. - - clcomm.a: - When closing the server connection the autorisation table will - now be freed before the program ends. - - mbcico: - During binkp calls the mailer history wasn't filled with - session information. - Some system names were too long for the history info. - Will now properly initialize the mailer history file when it - doesn't exist. - With incoming calls the "Node not in setup..." debug log - message at startup is supressed. - Will send netmail with Immediate flag set allways. - Will now also poll non-CM systems outside ZMH. You should - know what you are doing! - The format of the outbound .sts files is changed to prevent - problems on Sparc systems. - Made the FTS-0001 sessions work again. - With outbound sessions the RH1 link option is set. - If a file is received and there is alread an empty file with - the same name, that one is removed to prevent filename extension - bumping. This may be a leftover from a previous failed session. - - mbout: - Won't create polls for nodes not in the nodelist, nodes that - are Down or Hold. Removing polls is always possible. - When multiple polls on the commandline are given, if one of - these nodes is down/hold, then all other polls are still - created. - When creating a poll for a non-CM node outside ZMH, a warning - is given and written in the log. - Added the fileattach command. - The format of the outbound .sts files is changed to prevent - problems on Sparc systems. - - mbfido: - In the rollover function the mailer history is truncated each - month. The current and previous month records stay. - When forwarding .tic files, the files are now attached to the - routevia address if this is set for a node. - Processes scanning of netmail with the immediate flag set. - Added more debugging info for the scan function. - Uses the services database to decide incoming netmail to handle - by AreaMgr, FileMgr or Email. - Moved some functions to common.a - Configuration errors found during mailscan are now logged. - Removed a small memory leak from the magic manager. - Added experimental email import from a FTN UUCP gateway. - The AreaMgr now refuses to disconnect a node who is cutoff from - an mail area to prevent reconnection. - If from a received tic file the accompaning file is missing in - the inbound the errormessage will now say that instead of the - wrong message "Permission denied". - - mbsetup: - In edit fido aka's when you remove a secondary nodelist the aka - is now automatic erased. - The line editor now checks if a line only contains spaces, if - so, the line is returned erased. Trailing spaces are still - possible! - Added global settings and user settings for the new options. - Added 5 new menu choices, Post Email, Read Email, Trash Email, - Choose Mailbox and Quickscan Email. - Added setup for the services database. - Added setup for the domain translation database. - Corrected some sitedocs chapters numberings. - Added setup parameters for news in the message areas editor. - For new installations there will now be a default system - location filled in. This will prevent "mbstat open" to hang - for sysops that didn't do proper system setup. - - mbmsg: - The post function created the semafore scanout instead of - mailout. - Moved some functions to common.a - Messages written with GoldED were deleted by age because some - GoldED versions don't set the Processed date. - - mbsebbs: - Added DoNop() to message read function to prevent losing the - connection with mbsed with long messages. - Added netmail Immediate option for non CM nodes. - Replaced some hardcoded prompts by language prompts. - Duplicate phonenumbers check is finally working. - Added better check for personal mail. - The messagearea overview now also counts messages written by - the user as personal messages. - Changed the newuser function to set system and bbs password - in one function so the user creates the password only once. - During normal login (via user bbs) the plain user password is - stored in the userbase. This will not work with Unix login. - New textcontrolcode: Control-K + N, current e-mail mailbox name. - Updated the change password menu command to use the new - mbpasswd wrapper. - If a user decided to Quit check for newmail, the bbs crashed - with a segfault. - Will not insert Re: in the subject of the subject contained a - Re^2: produced by GoldED. - Patched the fullscreen editor with code from Johannes Lundberg - to correct the "invalid screencoordinates" problem. - Adds the ^aCHRS kludge with CP437. - Will now free the server authorisation tables on exit. - The users plain password is now written to door.sys - - mbsed: - Removed the fsync calls in the logfile write functions, - it never did any harm and the fsync calls do really slowdown - the system. - The locking functions only waited for 2,5 second instead of 15. - - mbpasswd: - New wrapper, sets a new password for a user from the - commandline. - - mbuseradd: - Doesn't ask the user for a new Unix password anymore, mbpasswd - is used instead to set the password. - - lang: - Added 10 new language prompts, 461 upto 470. - Changed language prompts 39, 40 and 388. - - mblang: - Corrected a bug reported by Johannes Lundberg (2:206/149). - - mbuser: - Will now remove blank records at the end of the database. - - mball: - The index function now translates the characterset from CP437 - to ISO-8859-1. - - mbdiff: - Removed a small memory leak. - - mbindex: - Writes an error in the logfile when no nodelist is defined for - a network that is defined in the network setup. Processing of - all other lists will be completed. - - mbmon: - Will now free the server autorisation table at exit. - - mbmail: - New program, use this to replace ifmail from the ifmail package - for the email gateway if you had that installed. If it is then - it's probably configured in /etc/sendmail.cf or whatever other - MTA you are using. - - -v0.33.15 08-Oct-2000 - - upgrade: - After installing the new binaries kill mbsed. Start mbsed. - Start mbsetup, open global menu 1, exit and save. This will - set the default value for newsarticles dupe database size. - Set the real news areas to the type News instead of Echomail. - Copy mbsebbs-0.33.15/script/run_inout to $MBSE_ROOT/etc - Compile the nodelists again with mbindex. - - general: - All version information for the sources now comes from the - generated file config.h - Tested on Slackware 7.1 (i386) and Debian 2.2 potato (Sparc). - Changed the SS() macro to MBSE_SS() to prevent conflicts - with system libraries. - Changed the way debug logging is, see the file DEBUG for - details. - Updated the ftscprod list with version 006 of 22 jan 2000. - I dared to ask for a product code with the FTSC commitee. - Removed the McMail.bug file from the distribution because - later releases (after 1.0) don't have problems anymore with - EMSI handshake. - Added nodelist capability flag IFT for future extension. - Added forgotten nodelist capability flag Z19. - Changed the analogue modems priority. - - lib: - When there was more then 6 Gig diskspace free, several programs - complained about negative diskspace available. - The logger now registers the /dev/pts/n devices correct. - Changed the logger for the new debug way of logging. - The logger is now protected for stringlength overflow. - - mbfido: - When exporting echomail all system aka's in the same zone are - now added to the SEEN-BY lines. - Experimentail newsgroup postings from local posted echomail - and received echomail. - Now closes active SMTP and NNTP servers only once if they have - been used instead of opening and closing for each message. - The filemover now creates destination directories if they don't - exist. - Added patches from Redy Rodriguez of 2:283/613.6: - . Added %RESCAN and %MSGS to the Areamgr. - . It also fixes two bugs in %QUERY: it incorrectly listed the - linked areas (I have added the great totals at the end of - answers to %QUERY and %LIST); and it also corrects its not - recognizing the area tag if you ask for it in lower case - letters (should always be in upper case). - . The AREA: kludge in echomail is now only tested if it is the - first line of the message. - . Added the message area autocreate function. See the manual - for details how to set it up. - mbfido now creates MBSE-FIDO ^aPID and ^aTID kludges. - Crashmail to points will be sent to their boss node. - Sending email now uses the mkrfcmsg function. - Incoming .pkt files not ending with a zero word are now - processed as if they were ok. The will not end up in the bad - directory anymore. - In magic unpackfile for test there is now an calloc for the - cwd buffer to see if that removes a NULL pointer free'd error. - - SETUP.sh - Added extra check for Slackware systems. Since 7.0 there is - an extra check needed to prevent detecting a Mandrake system. - Corrected a minor typo for Debian startup script. - - mbsetup: - The PickAka function loaded the global setup again when - editing the global setup so you did loose all recent changes. - Added a menu entry in menu 1.13 to set the size of the news - articles dupes database. - In screen 9.2 changed the order of fields 19, 20, 21 and 22 - because item 8. got partly overwritten by linewrapping. - - mbsed: - Corrected the data given for disk statistics for large disks. - The log function now prints all characters to the logfile. - - mbsebbs: - New users have now default the fullscreen message editor. - Added patches from Redy Rodriguez of 2:283/613.6: - . Changed language prompts 136...141 and added 471. Changed - the timestatistics output in funcs4.c for the changed - language prompts. It is now full international. - mbsebbs now creates MBSE-BBS ^aPID kludges. - It is now possible to reply crash to points by testing the - status of the bossnode. Also crash posting to points is - now possible. - Changed some debugging code of the fullscreen editor. - Message reading on Sparc systems works again. - The offline reader functions Tag areas, Untag areas and View - tags will now display the more/y/= prompt when the listings are - longer then the screenlength. Patches by Redy. - When posting a news article the To: field is automatic filled - with "All". - Postings to email and newsgroups now add some RFC headers for - mbfido to process. The style of GoldED is used. - - mbcico: - mbcico now creates MBSE-CICO ^aPID kludges. - The binkp transmitter now sends a zero length dataframe after - the transmitted file to all mailers except mbcico. - Removed a small bug in EMSI handshake routine. - Revised modem7 timeouts. Corrected checksum error for first - time receive of filename. - Did final testing for FTS-0001 sessions, a lot of bugs are - repaired. Note that most of them may be present in ifcico. - In a FTS-0001 session wazoo filerequests are also honored. - Sometimes received wazoo requests were renamed to temp - filenames and not responded to. - Corrected the helpscreen for the TCP/IP modes. - Improved the random dial delay time generation. - - mbmon: - The logger now registers the /dev/pts/n devices correct. - - mbchat: - Patches for new device pty names by Redy Rodriguez. - - fbutil: - New utility written and maintained by Johannes Lundberg, - 2:206/149@fidonet, . - - run_inout: - Changed this script to check for the inbound/bad directory, - if it doesn't exist it is created. - Removed all old news/email gateway stuff. - The goldnode compiler is called if it is in $MBSE_ROOT/bin. - - -v0.33.16 07-Jan-2001 - - upgrade: - Edit the crontab to comment out the lines with run_inout, - mailer and mbstat check. - Compile the sources. - Stop the bbs, kill mbsed. - Install the new binaries. - Start the bbs as root with the new init script. It will be - in some init.d subdirectory depending on your distribution. - If you can't find it, reboot. - If you want to start using the newsgate, run mbfido news -learn - the first time to learn which articles there are. - Edit menu item 1.14.3 and check that it's empty if you don't - use it. - - CRON.sh: - Removed the lines that ware replaced by the mbtask program. - - SETUP.sh - Changed binkd into binkp because binkp is the official protocol - name. - Corrected a problem installing on a system without shadow - passwords. - Removed the part where the init scripts are installed. They - are now in a new script in the script directory. - - clcomm.a: - New function Syslogp, to log unformatted strings, the normal - formatted string logfunction did hang sometimes when logging - strings containing the % character. - Improved some error messages in the NNTP and SMTP connections. - - common.a: - Protected uniq_list and sort_list against NULL pointers. - Handles the error strings now if there is a $ at the start - of an logstring. This was only in the daemon but that didn't - give the right errorstrings. Nobody noticed this error has - been here from the beginning. - Protected the chkftnmsgid function from NULL input. - - libdbase.a: - Dupe checking databases are now loaded in memory when needed - and written to disk only once when ready. - - general: - Two new global switches, don't regate and allow control - messages. - Changed the maptab cp437__iso-8859-1 to translate 8bits dos - graphics to 7bits characters to make all fancy dos like - textboxes more readable on Unix systems. - New setup parameters for UUCP newsfeeds. - Added support for the PPC cpu. - - mbtask: - New daemon. Takes over the functions of the run_inout and - mailer scripts. This program launches every program needed - to run the bbs. It will also check Zone Mail Hour. - - mbsed: - Corrected a spelling error in the program header. - Made the userlog full transparant. - Fixed a memory leak in the userlog function. - Changed file locking of mbsed status files to use fcntl() - instead of placing lockfiles. - - mbfido: - Protected the rfcmsgid function against NULL input. - Build some protection against too long lines in ftn messages - that were gated from rfc and regated to news. - Removed a lot of #ifdef statements for gating behaviour and - made a lot of code permamenent. - Original code for #ifdef ALLOW_CONTROL and DONT_REGATE is now - under control of configuration settings. - Forwarded files had an old copyright message in the tic files. - When sending messages to the SNMP or NNTP servers a line with - only a dot in it will be sent as a space and a dot to prevent - that the server thinks it's the end of the message. - When sending or forwarding messages to a destination with a - routevia address, the arcmail will be packed with the flavor - of the new destination node. - Magic execute uses the exec call now instead of the system - call, the programs to execute must now be in MBSE_ROOT/bin or - it will fail. - If a MSGID is missing the dupecheck includes the message text - in the dupecheck. (Redy). - Local posted echomail gated to news has now the right From: - address format and the right UTC time. - Imported news messages had an AREA: line in the message text. - Gating news to echomail doesn't crash anymore. Fixed several - bugs to make this finally work. - During gating news to echomail the mbmon program now displays - what is going on. - Added usleep code during news scanning. - The program is now installed setuid mbse and setgid bbs. This - allows it to be called by other users as mbse. - New commandline, uucp. This allows mbfido to process incoming - uucp newsbatches. Call it from uucp by: - cat newsbatch | /opt/mbse/bin/mbfido uucp -quiet or - cat newsbatch | /opt/mbse/bin/mbnews - It will handle compressed and uncompressed newsbatches. - If a scanned netmail should be send via your own UUCP gate, the - message will be handled further by the ExportEmail function. - All other UUCP destinations will be send via the remote UUCP - systems. - News articles that need to be send via NNTP are now first stored - in a temporary file. At the end of the mbfido run it will try - to post these articles. If it fails (newsserver down), the temp - file stays for a later try. - Added newsserver options for submitting articles via rnews and - to an UUCP remote host. - Added alias database again that was in the original ifmail. - Made a universal email post function. - Removed sourcefiles addos.*, they were not used. - If in configuration the root for the html pages is blank, then - no html pages will be created. - Netmail send to "ping" are bounced back to the sender if your - system is the final destination. If such a netmail is passing - thrue, the receiver is notified (trace). All ^aVia lines are - added to the replies. Systems running MBSE 0.33.16 and up may - now add the PING flag to the nodelist. - - mbmail: - If there is no Organization header, the BBS default origin - line will be used. - Removed a lot of #ifdef statements for gating behaviour and - made a lot of code permamenent. - Original code for #ifdef ALLOW_CONTROL and DONT_REGATE is - now under control of configuration settings. - The packet routing is now determined using the mail tracker. - The point of splitting large messages is now set at the point - from the setup instead of hardcoded at 12 Kbytes. - The program is now installed setuid mbse and setgid bbs so that - braindead MTA's can still deliver mail to the Fidonet. - Mail for users at your own bbs is now imported into the netmail - board. - Added REPLYTO: REPLYADDR: and MSGID: kludges if these where - not yet present in the message. - Added alias database again that was in the original ifmail. - - mbsetup: - In menu 1.13 added allow control and don't regate setup. - In all menus the default prompt selection is now "-" instead - of "0", so just pressing enter will leave from a menu. - When editing a new message area the area is automatic made - active when you assign a group to the area. - Most databases now create default records the first time. - The sitedoc pages for the tty lines were to big for each - printed page. - Splitted menu 1.13 in a Fidonet and Internet part, added setup - parameters for UUCP newsfeeds. - In the services setup the UUCP/Email entry is now added for - first time installations. - - mbmon: - In all menus the default prompt selection is now "-" instead - of "0", so just pressing enter will leave from a menu. - - mbout: - Fixed the helpscreen. - - mbstat: - Removed the check command, this is now done by the mbtask - daemon. - - mbcico: - Doesn't use tmpnam anymore during execute magic request. - The openfile function doesn't use tempnam anymore if a filename - is created after 62 name bumps. - When searching for a matching aka and your first aka is - disabled the first active aka is used as default. - The closefile function doesn't use the tempnam function anymore. - - mbsebbs: - When posting news articles when not permament connected to the - internet, the From address will be Fido style. - Messages for offline packets are now packed using the - following tests: - - If area is netmail then only personal messages are - included (unchanged). - - If area is not netmail, and msg-kinds are private then - only personal messages are included. - - If area is not netmail, and msg-kinds are both (pvt/pub) - then personal messages and messages without pvt flag are - included. - - Otherwhise all messages are included in the packet. - Removed debug messages for the POP3 protocol. - - mbpasswd: - Fixed a compile problem on systems without shadow passwords. - Thanks to Mario Mure. - Corrected a missing library in salt.c - Corrected a missing conditional header file in encrypt.c - - mbmsg: - Wrote wrong CHRS kludge in the post function. - - mbfile: - Warns about empty file areas during kill files. - - -v0.33.17 21-May-2001 - - upgrade: - Compile the sources. - Stop the bbs using the init script mbsed as root: - Slackware 7.0 and older: /opt/mbse/etc/rc.shutdown - Slackware 7.1 and newer: /etc/rc.d/init.d/mbsed stop - RedHat and Mandrake: /etc/rc.d/init.d/mbsed stop - SuSE: /sbin/init.d/mbsed stop - Debian: /etc/init.d/mbsebbs stop - Install the new programs. - Start the bbs using the examples above and use the word start. - Use mbsetup menu 1.18 to change the Zone Mail Hour if you are - not in Fidonet zone 2. - - general: - The daemon mbsed is now obsolete, all these functions are now - in the mbtask daemon. For client/server communications Unix - Datagram sockets are used instead of TCP stream sockets. - Italian language added, translated by nervous@nervous.it - Spanish language added, translated by Redy Rodriguez. - JAM messagebase locking is now according to the JAM specs. - - docs: - Added fsc-0088, fts-4001 and a page to describe the use of a - UPS with MBSE BBS. - Updated documentation to show all changes. - Added in file area setup and message area setup the description - of the global commands. - - SETUP.sh: - Removed installing mbse as port in /etc/services - - common.a: - The diskfree check now ignores a mounted filesystem at /boot - because that filesystem is usually small and not needed by - mbse. - The diskfree check should support reiserfs now (not tested). - Code and logging cleanup in packet.c - - dbase.a: - Removed debug logging from the dupes databases. - - mbinet.a: - When an NNRP server asked for authentication after the first - command instead of after connect, the user authentication - wasn't started. - - mbsed: - Obsolete and removed. - - mbtask: - Does all things mbsed used to do, it uses Unix Datagram sockets - to communicate with the clients. - If IP addresses to test are entered in the setup it will check - if the internet connection is available with ICMP ping. - Added Internet connection status, system running status and - system load average to the GSTA command for mbmon. - Create's the file ~/etc/config.data if it doesn't exist and - fills it with default parameters. - Note: the internet connection status is for future use. - - mbfido: - The pktdate logresult is now only displayed if there was - something wrong. - The Checkdupe fallback logmessage is removed. - Corrected a small bug in the news to echomail gate to get the - correct replyto and replyaddr kludges in the messages. - Changed the tosspkt messages read functions back to the way it - was so the namefield may be exactly 36 characters long excluding - the null terminator. - The PING function didn't work if the message came from a node - not in the setup. - The PING reply now has a Re: prepended. - The scannews function now acts better on nntp error conditions. - Local posted echomail dropped the subject when it was gated to - news. - If imported netmail doesn't have a FMPT kludge and there is - pointinfo in the MSGID line, the pointinfo is taken from the - MSGID line. - Improved the TRACE message of the PING function to make it - more clear that it is a TRACE message. - The PING reply now uses the aka from address that was original - the destination address instead of the matched aka in the - reply message. - Added a hack to try to process .tic files that are not lowercase - filenames. - Added support for a system alias file to convert fidonet - addresses to RFC addresses. - In the mbnews function the tests for the headers Newsgroups: - and Message-ID: are now case insensitive. - File attaches with the leave case option set did not get the - TFS or KFS flags set in the attachement. - - mbdiff: - Removed some debugging logmessages. - - mbfile: - Removed some unnecessary logmessages. - - mbmon: - When viewing the bbs lastcaller list the clock wasn't updated. - The commandline option doesn't work anymore because we - now use Unix Datagram sockets to communicate with the server, - so we must be on the same system. - Added Internet status, running status and system load average - to the Server Statistics screen. - Minor adjustments to the screen layout of the Filesystem Usage - screen. - - mbindex: - Sends the correct IsDoing information to mbtask during sort and - write. - - mbsetup: - Added setup screen for the task manager. - Some menus didn't have the default "-" character in the prompt. - The language setup now adds Italian and Spanish on new - installations. - In main system aka's shortened the domain names from 12 to 11 - characters length to prevent SIGSEGV in mbsetup. - Improved help messages when editing aka's. - Corrected chapter numbering in sitedoc. - Changed page layout sitedoc 8.1 - Removed initialisation of ~/etc/config.data, this is now in - mbtask. - In golded.inc AKAMATCHECHO is no YES. - In golded.inc writing the AKAMATCH aka's other then fidonet - didn't really match the aka's, the main aka was written instead. - - mball: - Removed two redundant log messages. - - mbmail: - The program wrote mbfido instead of mbmail in the logfile. - - mbsebbs: - During login with two names the second name now also checks - for empty responses from the user. - Removed some IEMSI debugging messages. - Removed the timeleft debug message. - Removed logmessage if no newfiles were found. - Removed rendunant log message abount start newfiles scan. - Removed logmessage if no newmail was found. - Removed debug email setarea message. - The list of languages to select is now divided in two columns. - The message to sysop function now doesn't quote and doesn't - write "Sysop wrote to ..." anymore. Thanks to Harald Wuensch. - The program now uses umask(007) instead of umask(000) - In the displayfile function the ^B syntax (show text above - sec. level) is now: ^B^B^B without - the < and > characters. Thanks to Harald Wuensch. - Removed (press enter to Quit) from language prompt 379 since - there is no default choice. - Adjusted a lot of strings for filenames and paths to PATH_MAX - in stead of 80 characters length. - Moved the Nopper call in the fullscreen editor to a place were - it always should work. - - mbcico: - The session debug logmessages are set to the special loglevel. - Implemented EMSI-II, FSC-0088. - When calling a TCP/IP node with hostname in nodelist system - name and a valid phonenumber, and if the hostname could not - be resolved, mbcico would dialout and try to establish a - TCP/IP session over the modem connection. Now the TCP/IP - flags are cleared and mbcico will fallback to valid old style - phone sessions. - In binkp added the M_NUL PHN and M_NUL OPM to log if they are - received from the remote. We also send these flags. - In binkp we now always send and empty dataframe after a file - is sent, most binkp implementations need this to detect EOF. - We don't log received empty frames anymore, we just drop them. - - mbpasswd: - Added check that username and password may not be longer then - 16 characters. - Fixed the error message on some systems about USERGROUPS_ENAB. - - mbuseradd: - Error messages now go to stderr. - Increased stringslength of some internal variables to PATH_MAX. - Check all arguments that they are no longer then 80 characters. - The user is now the owner of his homedir. In this homedir a - directory Maildir with subdirs cur, new and tmp are created, - also owned by the user. Some MTA's need this (Qmail). - Doesn't create the .hushlogin file anymore, not needed. - - mbmsg: - Now runs umask(007) - - mbuser: - If users at the end of the userbase are deleted and the database - should be truncated, these users were not removed from the Unix - system and their homedirectories weren't removed also. - Added a check to see if the sysop defined in the main config - also exists in the user database because these two must match. - - mbstat: - Added the semafore command to set internal mbtask semafore's. - - script/installinit: - Corrected a bug for Slackware 7.0.0 were the wrong initscripts - were installed. - - examples: - Replaced the internet menu and txtfiles with versions that work - with the current menu structure. - - -v0.33.18 27-Jul-2001 - - General: - The development team now has five members and the sources are - on sourceforge's cvs server. - Changed the name to MBSE BBS for Unix instead of Linux. - This version is ported but not well tested to FreeBSD. - - Upgrade: - In your Mail Transport Agent (if you use it) replace the line - "mbmail -r (recipients)" to mbmail "(recipients)". - In postfix this is in the master.cf file. - With mbsetup menu 1.3.8 fill in the path to the *.msg path. - - MBSE.FAQ: - New, maintained by P.E. Kimble aka King Kimerud - - lang: - Added Galego language by Redy Rodriguez. - Corrected Spanish language. - - SETUP.sh: - Doesn't create .huslogin anymore for user bbs. - Script does now work on FreeBSD but needs bash. - - common.a: - Corrected some defines in parsedate.c to include/exclude the - right code. - Changed the rawio to termios style instead of termio. - Added ufs filesystem as normal filesystem to the diskfree - function. - - msg.a: - When locking the JAM messagebase failed due to a lock error - nothing was logged and the error was not flagged. - - mbftpd: - Removed the subdirectory for this not finished program. It may - or may not return later. - - mbfido: - Filefind replies had a wrong ^aREPLY kludge. - Rewrote a lot of code so that similar functions are only once - present. This will make bughunting and maintaining much easier. - Scanned netmail from point addresses created with GoldED are - now always checked for missing FMPT, TOPT and INTL kludges and - they are inserted when missing. - The checkdupe switch also work in uucp mode (mbnews). - The code for mbmail is now merged into mbfido. A symlink from - mbmail to mbfido is created to let mbfido run in mail mode. - The syntax to call mbmail is changed. - Implemented processing ^aFLAGS for received netmail (FSC-0053). - - mbmail: - Obsolete, the functions are now in mbfido. - - mbtask: - Removed all references to the Memwatch debugger, mbtask is oke - but the debugger fills up the harddisk (very fast). - Does now respond again to external semafore's mailout, mailin - and scanout in the semafore directory. - Removes stale socket file if found. - Runs mbsetup init if config.data is created on new systems. - Fixed a SIGBUS fault for Sparc systems - - mbpasswd: - Added CLOSE_SESSIONS and ENV_ROOTPATH to getdef to prevent new - user error messages on some distributions. - Ported to work on FreeBSD. - - mbindex: - Patched by Ken Bowley to prevent a crash when the 300 baud - field is the last item on the nodelist line. - - mbmon: - Changed the rawio to termios style instead of termio. - Shows the OS name in the info screen. - - mbsetup: - Shows the OS name in the info screen. - Creates default tty records with tty names for the right - OS (I hope). - Fixed a bug in the menu editor, deleted menus were not really - deleted. - Added setup items for the menu Display colors. - Added a no suid switch to the menu for doors. - Added setup for *.msg directory in menu 1.3. - When changing the number of newfiles groups, the newfiles - reports database is converted on the fly. - All path variables now have a length of PATH_MAX. - When mbsetup is started, all databases not present are created - and when needed filled with default records. - There is now one possible commandline parameter: init. This - should be used only once (but doesn't hurt if run more then - once) on a new installation. - A check is build in that mbsetup is started by user mbse. - Fixed segfault error during exit of mbsetup when writing the - golded.inc file when the bbs is more or less unconfigured. - The file golded.inc is now only rewritten if changes are made - to the main configuration, fidonet data or message areas. - Added default archiver record for the Russian ARJ archiver. - - mbcico: - Renamed sendfile function in zmsend.c to sendzfile to prevent a - conflict with an existing library call on FreeBSD. - Removed some debug logmessages. - The filerquest response message doesn't use the tmpnam function - anymore, this was the last one of the unsafe tmpnam calls. - - mball: - Removed some compiler warnings on some systems. - - mbsebbs: - Removed some compiler warnings on some systems. - Added menu Display lines. - Added menu item 21, display text only. - When a user has no download files limit and no download Kbytes - limit he may download unlimited. - When a user has no timelimit set in the limits, he will get - a 24 hours session limit. - The written door.sys file now has EOF character at the end. - The written door.sys file now has a : after the comport. - Executing doors in nosuid mode (as real user) is now possible. - This can be switched on using mbsetup. Info will be in FAQ. - Fixed security problem in Unix username and password entry. - Now stoped nicely if started without controling tty. - Many bugs fixed in the full screen editor. - Last line of message is no longer deleted when saving message. - Segfault problem with deleting characters fixed. - Improved word wrapping. (still needs work) - Reduced amount of debug logging messages in editor. - - mbuseradd: - Ported to work on FreeBSD. - - mbpasswd: - Ported to work on FreeBSD. - - mbfile: - All path string variables are now of length PATH_MAX. - Added list file areas. - - fbutil: - Removed list file areas. - - htmldoc: - Upgraded the FTSC documents to the current state. - - -v0.33.19 26-Oct-2001 - - upgrade: - Announce any new files you might have. If you run mbtoberep - it should display no data anymore. - Change the file /opt/mbse/etc/issue like the example in the - subdirectory mbtask. - Change the shell for user "bbs" to /opt/mbse/bin/mbnewusr - The make install fixes several permissions that are wrong for - the new style (not setuid) of mbsebbs. - Remove /opt/mbse/etc/maint to let it replace with a new - version, or change it by hand. - On RedHat, Mandrake or e-smith systems remove the existing - start and stop commands with the runlevel editor, they will - be installed with other values when the system is installed. - If you forget this then mbsebbs will start and stop twice. - After compilation and installation run "mbfile check" to - update all file entries in the files database. This give a lot - of output in the logfile, don't worry about it. - In mbsetup 18 (task manager) set the fields 18, 19 and 20 to - the right values of your system. Also consider the setting - of field 13, set it to Yes if you cannot have a internet - connection at the same time when normal dial to fidonet is - needed. All other users, (more modems, cable/ADSL etc) set - this to No. - Fill in the right IP addresses in fields 11 and 12 of your - ISP's nameservers. If you don't have internet, fill these - with 192.168.1.1 and 192.168.1.2 as dummy addresses. - Change the startup program in /etc/inetd.conf for telnet if - you previously used mbsebbs to mblogin. - Change the default login program in mgetty's login.config to - * - - /opt/mbse/bin/mblogin @ - - general: - Made the Makefile system more simple. The bbs program now - doesn't run setuid anymore! This makes the system more secure. - A new program, mblogin, is written to allow logins with - Fidonet style names from mgetty and telnetd. This is a login - replacement for bbs use only. Normal shell users can't login, - not even root! - On FreeBSD the installed files are not removed anymore from - the source tree. - Added German language file made by Harald Wuensch. - The mbtask daemon now handles the calling of Fidonet nodes. - The sourcetree has now a new subdirectory called unix. Here - are all the system specific programs such as mbpasswd, - mblogin and mbuseradd. - Started NetBSD port, is in testing fase. - Added support for xinetd. - Fixed filemodes for some directories and data files. - - SETUP.sh: - Better grep to check for existing usernames like bbs, mbse. - Ported to NetBSD. - Added support for xinetd configuration. - Changed distribution test for Mandrake. - Changed to recognize the e-smith server based on RedHat. - If system runs xinetd instead of inetd, the configuration for - xinetd is updated with info for mbsebbs. - - installinit.sh: - Changed to recognize the e-smith server based on RedHat. - On RedHat, Mandrake and e-smith systems the symlinks to start - and stop the bbs are now added. - Reorganized the init scripts. - - libcommon.a: - When adding seenby entries, the zone number is copied from the - previous adress just like with the net numbers. This is for - old style tic files, they were not full 3d. - Fixes for Sparc systems. - The nodelist information now also holds the Txx flags. - The mkdirs function now needs a mode parameter for directory - creation. - The filesystem space check is now reliable on FreeBSD and - NetBSD. - - lang: - Changed language prompts 6, 71, 429. - Added language prompts 472 and 473 for FS editor. - Added language prompts 474, 475 and 476 for address entry. - Added language prompts 477 and 478 for post with user alias. - Deleted language prompts 387, 388, 389, 390 - - examples: - Changed menu setup.mnu and textfiles setup.* to show the new - setup entries for the users. - - mbsetup: - Changed usereditor, new layout, added new settings and - changed password reset function. The system password is - now also updated. - Added setup item for menus 317 and 318. - Changed the order of menu 1, global settings. The screens are - now in a more logical order for a first system setup. - Most datafiles are now saved mode 0640 exept the files that - need to be rewritten by users, they have mode 0660. - The filemodes are always checked and corrected during startup. - In the file database editor the default choice was 0 in stead - of -. - When a file area is made unavailable in menu 8.4, first the - files in that area area checked. If there are none, the area - is completly removed, including paths, indexes and database. - When an new area is made available, the database is created. - The AREADEF lines in golded.inc now contain the aka to use - instead of a dot. - Fixes for Sparc systems. - Now logs in the normal system logfile. - On new systems it will now also create one filearea, three - default mail areas, a newfilereport and the groups belonging - to these areas. Also 10 oneliners are installed. - Changed help for nodes billing flag. - Changed users password length to 14 characters instead of 12. - When you make a tty line available, some settings are - automatic set to reasonable defaults. - The color editor now has a rangecheck. - Rewrote calling of the color editor for Sparc systems. - Added setup items in global and message areas to limit the - fetching of newsgroups headers. - The edit field now shows the contents correctly if the field - contains the % character. - In several menus after leaving a edit record records were - displayed from start again, now shows last screen. - When editing a node's connected file/mail groups it can now - handle more then 40 groups without messing up the screen. - Fixed area selection in filedatabase editor. - Protected help string display for boolean edit against buffer - overflow. - Menu 5.1.14, helpstring was too long, causing a buffer - overflow without the previous protection. - - mbsebbs: - Added menu 317, change FS editor shortcut keys to (Emacs/ - Wordstar) style. This has no effect on the editor for now. - Added menu 318, change users address. - Added control-U 4, ON/OFF for FS edit Emacs shortcut keys. - Now updates the lastcaller information when a call is finished - and now also sets all the action bits what the user has been - doing. Also time online is correct now. - Added control-U 5, 6, 7, display users address lines 1, 2 - and 3. - If a user doesn't have a .signature file in his homedir, a - simple one will be created. - If a user saves a new message at the bbs, the message will be - signed using the .signature file. - Patches from Bobby Cabral: - - Fixed display file with more that stopped after every line. - - Added display file "mainlogo" before the "welcome" file. - - Added display files "welcome2..9" after "welcome1" file. - Posting message with users alias is now possible. - If in menu entries "Display prompt" the fore and background - colors are set, the prompt is displayed with these colors. - If not, the prompt defaults to white on black. - Does now run as the users uid, not suid anymore. You are not - able to login with Fidonet style name anymore, the mblogin - program does this. Removed IEMSI support, this has no use - anymore. New users need to register with the mbnewuser - program, mbsebbs is only for registered users. This should - fix all kinds of setuid and security problems with previous - versions. - In the door.sys files is now a nodenumber written. This is - actually the tty record number. - QuickScan messages in netmail areas now only shows personal - messages. - The whoson list now uses mbtask to get the information. - The users exitinfo file is now stored in his homedirectory - with mode 0600. - A lot of code rewrites to make it more modular. - The bbs datafiles that users create now have mode 0660. - The file taglists now work internally with long and short - filenames. - The file listings are displayed with the short filenames. - Download files are sent with short filenames. - File search is done on long and short filenames. - Uploaded files are accepted with long filenames, the short - name is created when the upload is processed. - The virus scan after files upload tried also to use scanners - that were not available. - The upload virus file scan now also scans files that are not - known archives. Should catch macro viri and worms. - The file CRC is now set when importing an uploaded file. - Fixed quote initials of the original user containing a space - character if there was a dot followed by a space in the users - name. - If Ask Date of Birth is not set in the configuration the user - can't change his date of birth and his age is 0 years. You - should not disable this if you restrict access to some file - areas if you want to test the users age. Also the age in the - users record is invalid. - Fixes for Sparc systems. - System calls for archivers and virus scanners are replaced - with execute. - During startup the username is tried from the environment - variables LOGNAME and USER. - Added some automatic file permission corrections. - - mbnewusr: - New program, run by user bbs. This is only to register a new - bbs user. Should be started by the bbs account. - Ask Date of Birth now only is asked if set in configuration. - Fixes for Sparc systems. - - mbpasswd: - Added more checks to see if it's legal invoked. - Password change on FreeBSD finally works. - Moved to new sourcetree. - Ported to NetBSD. - - mblogin: - New program. Replaces standard login, allows Fidonet style - usernames. Has it's own login.defs file. - - mbcico: - Undefined IEMSI support since mbsebbs doesn't support it - anymore. - Filerequest responses are now created with long filenames. - When sending files, if the remote has the FNC link flag, the - filename is mangled to DOS 8.3 format when transmitted. - File request response messages now display the long and - short filename in the reply. - Filerequest response messages now have a random quote added. - The binkp driver now sends 8.3 mangled filenames if that - option is set for the remote node in the setup. - The hydra driver now sends 8.3 mangled filenames and long - filenames as specified in the specs. - Corrected the location of the modem lockfile on FreeBSD. - Fixes for Sparc systems. - When a session fails, the node status retry time is current - time + random dial delay time. Needed for mbtask. - - mbout: - Fixes for Linux Sparc systems. - The node query now displays the system open times (Txx) flags. - The node query now also displays the CM,MO flags etc. - - mbtask: - Changed to handle the External Doors flag in the lastcaller - information. - On new systems, ~/etc/config.data and ~/etc/task.data are - created with mode 0640. - On new systems, the DOS path isn't set anymore by default, - most people don't need it. - Starting utilities is now more relaxed using a 3 seconds - pause timer. Fixed some potential Sparc problems. - On new systems, all paths for MBSE are now created in the - /opt/mbse root. - When scanning outbound, flags are set if flo or mail pkt files - are present. - When the internet connection status changes, the outbound is - rescanned. - Implemented Txx nodelist flags, FSC-0062. - Added code to see which nodes could be called depending on - outbound status, nodelist flags etc. Experimental. - Added code to do outbound calling, experimental. Calling - systems in parallel is now possible. - Creates the semafore do_inet if there is an internet node to - call even if there's no internet connection. Removes this - semafore if there are no internet nodes to call. This can be - used by ppp scripts to see if there is work and when there is - no more work to do. Not important for permament connected - systems. - Made the FreeBSD and NetBSD disk status calls reliable now - that I know how to really get the mounted filesystems. - The system load value is implemented on FreeBSD and NetBSD. - - mbmon: - Changed the lastcaller screen to display the External Door - information. - When lastcaller info is scrolling, the lines are first proper - erased. - Fixes for Sparc systems. - Added support for display do_inet semafore in menu 2. - - mbmsg: - Corrected header in logfile for pack function. - Fixes for Sparc systems. - - import: - Removed users import, could not work anymore. - - mbfido: - When running in mbmail mode, it will try to get the lock on - the program for 10 minutes before aborting and waits until - another mbfido program is ready. - Fixed the problem that the KillSent flag was set on processed - netmail. - Reset the KillSent and Hold flags when storing netmail in the - message base. - The tic file import function now sorts and tests on long file- - names, with the new mangle function an DOS 8.3 filename is - also stored in the file database. - For all files received in tic area, the crc of the tic area - name is stored in the filerecord. This is for the future - rescan option. - Implemented long filenames with hatch. Now uses ticfile key- - word Fullname for the long filename. - Fixes for Sparc systems. - File forwarding now really depends on the downlink billing - flag. - Now limits fetching of newsheaders according to area setting. - Added the Size parameter to the tic files, this appeared to - be missing since a while. - Fixes for Fido->internet gate for dropped characters during - linewrap. Experimental. - Added netmail bounce function. - Protected the postemail function from posting to local FTN - addresses, this will cause a mailloop for undeliverable mail. - These mails will be bounced back. - - mbfile: - During checks the file databases are reset to filemode 0660. - Implemented "mbfile adopt" function. - Started working on long filename support. The real name on - disk is the long filename, the database records also holds - an uppercase mangled 8.3 filename. In most cases this is just - the same name in upper and lowercase. Name mangling like Win$ - is performed on the long filenames. - Implemented "mbfile import" function, this imports complete - areas from files.bbs information. - Added "mbfile toberep" function, this gives an overview of the - toberep database. The program mbtoberep does this as well, but - that one gives a complete dump and is for developer use. - The "mbfile index" function now also writes files.bbs files, - the index.html files for http download and 00index files in - all available areas. The files.bbs files have download - counters included. - The mbfile check function now converts the short filenames - to DOS 8.3 filenames. (The first time this logs lots of - errors). - The mbfile list function now gives a listing of the contents - of a file area if the area number is given as argument. - Implemented "mbfile move" command. You can only move one file - at the same time. - Implemented "mbfile delete" and "mbfile undelete" commands. - The command mbfile check now removes obsolete file databases. - Fixes for Sparc systems. - Fixed index screens to prevent negative totals with large - filebases. - Added standard doctype header and commentline to the html - pages. - The mbfile check function deletes double filerecords in the - database. - - mball: - The index function is now obsolete, this is added to mbfile. - You may need to adjust your scripts that call "mball index". - Fixes for Sparc systems. - Fixed to prevent negative values with large filebases. - - mbaff: - Fixes for Sparc systems. - Fix for large filebases, could not run longer then 10 minutes. - - mbindex: - Fixes for Sparc systems. - - mbdiff: - Fixes for Sparc systems. - - mbfbgen: - Obsolete and removed from the distribution. The function is - now in mbfile. - - fbutil: - Removed from the distribution. Thanks to Johannes Lundberg, - 2:206/149@fidonet to let us use his program until mbfile could - take over. - - v0.33.20 10-Feb-2002 diff --git a/Makefile b/Makefile index 062afd1a..438c0d63 100644 --- a/Makefile +++ b/Makefile @@ -5,6 +5,7 @@ include Makefile.global OTHER = AUTHORS ChangeLog COPYING DEBUG CRON.sh FILE_ID.DIZ.in \ INSTALL.in Makefile Makefile.global.in NEWS \ + ChangeLog_1998 ChangeLog_1999 ChangeLog_2000 ChangeLog_2001 \ README SETUP.sh TODO UPGRADE aclocal.m4 \ checkbasic config.h.in configure configure.in TARFILE = ${PACKAGE}-${VERSION}.tar.gz