995 lines
20 KiB
C
995 lines
20 KiB
C
/*
|
|
* $Id$
|
|
*
|
|
* Z M . C
|
|
* Copyright 1994 Omen Technology Inc All Rights Reserved
|
|
* ZMODEM protocol primitives
|
|
*
|
|
* Entry point Functions:
|
|
* zsbhdr(type, hdr) send binary header
|
|
* zshhdr(type, hdr) send hex header
|
|
* zgethdr(hdr) receive header - binary or hex
|
|
* zsdata(buf, len, frameend) send data
|
|
* zrdata(buf, len) receive data
|
|
* stohdr(pos) store position data in Txhdr
|
|
* long rclhdr(hdr) recover position offset from header
|
|
*
|
|
*
|
|
* This version implements numerous enhancements including ZMODEM
|
|
* Run Length Encoding and variable length headers. These
|
|
* features were not funded by the original Telenet development
|
|
* contract.
|
|
*
|
|
* This software may be freely used for educational (didactic
|
|
* only) purposes. This software may also be freely used to
|
|
* support file transfer operations to or from licensed Omen
|
|
* Technology products. Use with other commercial or shareware
|
|
* programs (Crosstalk, Procomm, etc.) REQUIRES REGISTRATION.
|
|
*
|
|
* Any programs which use part or all of this software must be
|
|
* provided in source form with this notice intact except by
|
|
* written permission from Omen Technology Incorporated.
|
|
*
|
|
* Use of this software for commercial or administrative purposes
|
|
* except when exclusively limited to interfacing Omen Technology
|
|
* products requires a per port license payment of $20.00 US per
|
|
* port (less in quantity). Use of this code by inclusion,
|
|
* decompilation, reverse engineering or any other means
|
|
* constitutes agreement to these conditions and acceptance of
|
|
* liability to license the materials and payment of reasonable
|
|
* legal costs necessary to enforce this license agreement.
|
|
*
|
|
*
|
|
* Omen Technology Inc
|
|
* Post Office Box 4681
|
|
* Portland OR 97208
|
|
*
|
|
* This code is made available in the hope it will be useful,
|
|
* BUT WITHOUT ANY WARRANTY OF ANY KIND OR LIABILITY FOR ANY
|
|
* DAMAGES OF ANY KIND.
|
|
*
|
|
*/
|
|
|
|
static void zputhex(int);
|
|
static void zsbh32(int,char*,int,int);
|
|
static void zsda32(char*,int,int);
|
|
static int zrdat32(char*,int);
|
|
static int noxrd7(void);
|
|
static int zrbhd32(char*);
|
|
static int zrbhdr(char*);
|
|
static int zrhhdr(char*);
|
|
static int zgethex(void);
|
|
static int zgeth1(void);
|
|
static void garbitch(void);
|
|
|
|
#include "../config.h"
|
|
#include "../lib/mbselib.h"
|
|
#include "../lib/nodelist.h"
|
|
#include "ttyio.h"
|
|
#include "session.h"
|
|
#include "zmodem.h"
|
|
|
|
|
|
/* Original zm.c timing was in tenths of seconds, but our current ttyio driver
|
|
does timing in whole seconds.
|
|
*/
|
|
static int Rxtimeout = 10; /* Seconds to wait for something */
|
|
int Zctlesc;
|
|
|
|
/* Globals used by ZMODEM functions */
|
|
int Rxframeind; /* ZBIN ZBIN32, or ZHEX type of frame */
|
|
int Rxtype; /* Type of header received */
|
|
int Rxhlen; /* Length of header received */
|
|
int Rxcount; /* Count of data bytes received */
|
|
char Rxhdr[ZMAXHLEN]; /* Received header */
|
|
char Txhdr[ZMAXHLEN]; /* Transmitted header */
|
|
int Rxpos; /* Received file position */
|
|
int Txpos; /* Transmitted file position */
|
|
int Txfcs32; /* TRUE means send binary frames with 32 bit FCS */
|
|
int Crc32t; /* Controls 32 bit CRC being sent */
|
|
/* 1 == CRC32, 2 == CRC32 + RLE */
|
|
int Crc32r; /* Indicates/controls 32 bit CRC being received */
|
|
/* 0 == CRC16, 1 == CRC32, 2 == CRC32 + RLE */
|
|
int Usevhdrs; /* Use variable length headers */
|
|
int Znulls; /* Number of nulls to send at beginning of ZDATA hdr */
|
|
char Attn[ZATTNLEN+1]; /* Attention string rx sends to tx on err */
|
|
char *Altcan; /* Alternate canit string */
|
|
|
|
char *txbuf=NULL;
|
|
char *rxbuf=NULL;
|
|
|
|
static int lastsent; /* Last char we sent */
|
|
static int Not8bit; /* Seven bits seen on header */
|
|
|
|
char *frametypes[] = {
|
|
(char *)"EMPTY", /* -16 */
|
|
(char *)"Can't be (-15)",
|
|
(char *)"Can't be (-14)",
|
|
(char *)"Can't be (-13)",
|
|
(char *)"Can't be (-12)",
|
|
(char *)"Can't be (-11)",
|
|
(char *)"Can't be (-10)",
|
|
(char *)"Can't be (-9)",
|
|
(char *)"HANGUP", /* -8 */
|
|
(char *)"Can't be (-7)",
|
|
(char *)"Can't be (-6)",
|
|
(char *)"Can't be (-5)",
|
|
(char *)"EOFILE", /* -4 */
|
|
(char *)"Can't be (-3)",
|
|
(char *)"TIMEOUT", /* -2 */
|
|
(char *)"ERROR", /* -1 */
|
|
(char *)"ZRQINIT",
|
|
(char *)"ZRINIT",
|
|
(char *)"ZSINIT",
|
|
(char *)"ZACK",
|
|
(char *)"ZFILE",
|
|
(char *)"ZSKIP",
|
|
(char *)"ZNAK",
|
|
(char *)"ZABORT",
|
|
(char *)"ZFIN",
|
|
(char *)"ZRPOS",
|
|
(char *)"ZDATA",
|
|
(char *)"ZEOF",
|
|
(char *)"ZFERR",
|
|
(char *)"ZCRC",
|
|
(char *)"ZCHALLENGE",
|
|
(char *)"ZCOMPL",
|
|
(char *)"ZCAN",
|
|
(char *)"ZFREECNT",
|
|
(char *)"ZCOMMAND",
|
|
(char *)"ZSTDERR",
|
|
(char *)"xxxxx"
|
|
#define FRTYPES 22 /* Total number of frame types in this array */
|
|
/* not including psuedo negative entries */
|
|
};
|
|
|
|
|
|
/***** Hack by mj ***********************************************************/
|
|
/*
|
|
* Buffer for outgoing frames. Sending them with single character write()'s
|
|
* is a waste of processor time and causes severe performance degradation
|
|
* on TCP and ISDN connections.
|
|
*/
|
|
#define FRAME_BUFFER_SIZE 16384
|
|
static char *frame_buffer=NULL;
|
|
static int frame_length = 0;
|
|
|
|
#define BUFFER_CLEAR() do { frame_length=0; } while(0)
|
|
#define BUFFER_BYTE(c) do { frame_buffer[frame_length++]=(c); } while(0)
|
|
#define BUFFER_FLUSH() do { PUT(frame_buffer, frame_length); \
|
|
frame_length=0; } while(0);
|
|
/****************************************************************************/
|
|
|
|
void get_frame_buffer(void)
|
|
{
|
|
if (frame_buffer == NULL)
|
|
frame_buffer = malloc(FRAME_BUFFER_SIZE);
|
|
}
|
|
|
|
|
|
void free_frame_buffer(void)
|
|
{
|
|
if (frame_buffer)
|
|
free(frame_buffer);
|
|
frame_buffer = NULL;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send ZMODEM binary header hdr of type type
|
|
*/
|
|
void zsbhdr(int len, int type, register char *shdr)
|
|
{
|
|
register int n;
|
|
register unsigned short crc;
|
|
|
|
Syslog('z', "zsbhdr: %c %d %s %lx", Usevhdrs?'v':'f', len, frametypes[type+FTOFFSET], rclhdr(shdr));
|
|
|
|
BUFFER_CLEAR();
|
|
|
|
if (type == ZDATA)
|
|
for (n = Znulls; --n >=0; )
|
|
BUFFER_BYTE(0);
|
|
|
|
BUFFER_BYTE(ZPAD); BUFFER_BYTE(ZDLE);
|
|
|
|
switch (Crc32t=Txfcs32) {
|
|
case 2:
|
|
zsbh32(len, shdr, type, Usevhdrs?ZVBINR32:ZBINR32);
|
|
BUFFER_FLUSH(); break;
|
|
case 1:
|
|
zsbh32(len, shdr, type, Usevhdrs?ZVBIN32:ZBIN32); break;
|
|
default:
|
|
if (Usevhdrs) {
|
|
BUFFER_BYTE(ZVBIN);
|
|
zsendline(len);
|
|
}
|
|
else
|
|
BUFFER_BYTE(ZBIN);
|
|
zsendline(type);
|
|
crc = updcrc16(type, 0);
|
|
|
|
for (n=len; --n >= 0; ++shdr) {
|
|
zsendline(*shdr);
|
|
crc = updcrc16((0377& *shdr), crc);
|
|
}
|
|
crc = updcrc16(0,updcrc16(0,crc));
|
|
zsendline(((int)(crc>>8)));
|
|
zsendline(crc);
|
|
}
|
|
|
|
BUFFER_FLUSH();
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send ZMODEM binary header hdr of type type
|
|
*/
|
|
void zsbh32(int len, register char *shdr, int type, int flavour)
|
|
{
|
|
register int n;
|
|
register unsigned int crc;
|
|
|
|
BUFFER_BYTE(flavour);
|
|
if (Usevhdrs)
|
|
zsendline(len);
|
|
zsendline(type);
|
|
crc = 0xFFFFFFFFL; crc = updcrc32(type, crc);
|
|
|
|
for (n=len; --n >= 0; ++shdr) {
|
|
crc = updcrc32((0377 & *shdr), crc);
|
|
zsendline(*shdr);
|
|
}
|
|
crc = ~crc;
|
|
for (n=4; --n >= 0;) {
|
|
zsendline((int)crc);
|
|
crc >>= 8;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send ZMODEM HEX header hdr of type type
|
|
*/
|
|
void zshhdr(int len, int type, register char *shdr)
|
|
{
|
|
register int n;
|
|
register unsigned short crc;
|
|
|
|
Syslog('z', "zshhdr: %c %d %s %ld", Usevhdrs?'v':'f', len, frametypes[type+FTOFFSET], rclhdr(shdr));
|
|
|
|
BUFFER_CLEAR();
|
|
|
|
BUFFER_BYTE(ZPAD);
|
|
BUFFER_BYTE(ZPAD);
|
|
BUFFER_BYTE(ZDLE);
|
|
if (Usevhdrs) {
|
|
BUFFER_BYTE(ZVHEX);
|
|
zputhex(len);
|
|
}
|
|
else
|
|
BUFFER_BYTE(ZHEX);
|
|
zputhex(type);
|
|
Crc32t = 0;
|
|
|
|
crc = updcrc16(type, 0);
|
|
for (n=len; --n >= 0; ++shdr) {
|
|
zputhex(*shdr); crc = updcrc16((0377 & *shdr), crc);
|
|
}
|
|
crc = updcrc16(0,updcrc16(0,crc));
|
|
zputhex(((int)(crc>>8))); zputhex(crc);
|
|
|
|
/*
|
|
* Make it printable on remote machine
|
|
*/
|
|
BUFFER_BYTE(015);
|
|
BUFFER_BYTE(0212);
|
|
|
|
/*
|
|
* Uncork the remote in case a fake XOFF has stopped data flow
|
|
*/
|
|
if (type != ZFIN && type != ZACK)
|
|
BUFFER_BYTE(021);
|
|
|
|
BUFFER_FLUSH();
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send binary array buf of length length, with ending ZDLE sequence frameend
|
|
*/
|
|
char *Zendnames[] = {(char *)"ZCRCE",(char *)"ZCRCG",(char *)"ZCRCQ",(char *)"ZCRCW"};
|
|
void zsdata(register char *buf, int length, int frameend)
|
|
{
|
|
register unsigned short crc;
|
|
|
|
Syslog('z', "zsdata: %d %s", length, Zendnames[(frameend-ZCRCE)&3]);
|
|
|
|
BUFFER_CLEAR();
|
|
|
|
switch (Crc32t) {
|
|
case 1:
|
|
zsda32(buf, length, frameend); break;
|
|
case 2:
|
|
zsdar32(buf, length, frameend); break;
|
|
default:
|
|
crc = 0;
|
|
for (;--length >= 0; ++buf) {
|
|
zsendline(*buf); crc = updcrc16((0377 & *buf), crc);
|
|
}
|
|
BUFFER_BYTE(ZDLE); BUFFER_BYTE(frameend);
|
|
crc = updcrc16(frameend, crc);
|
|
|
|
crc = updcrc16(0,updcrc16(0,crc));
|
|
zsendline(((int)(crc>>8))); zsendline(crc);
|
|
}
|
|
if (frameend == ZCRCW)
|
|
BUFFER_BYTE(XON);
|
|
|
|
BUFFER_FLUSH();
|
|
}
|
|
|
|
|
|
|
|
void zsda32(register char *buf, int length, int frameend)
|
|
{
|
|
register int c;
|
|
register unsigned int crc;
|
|
|
|
crc = 0xFFFFFFFFL;
|
|
for (;--length >= 0; ++buf) {
|
|
c = *buf & 0377;
|
|
if (c & 0140)
|
|
BUFFER_BYTE(lastsent = c);
|
|
else
|
|
zsendline(c);
|
|
crc = updcrc32(c, crc);
|
|
}
|
|
BUFFER_BYTE(ZDLE);
|
|
BUFFER_BYTE(frameend);
|
|
crc = updcrc32(frameend, crc);
|
|
|
|
crc = ~crc;
|
|
for (c=4; --c >= 0;) {
|
|
zsendline((int)crc); crc >>= 8;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Receive array buf of max length with ending ZDLE sequence
|
|
* and CRC. Returns the ending character or error code.
|
|
* NB: On errors may store length+1 bytes!
|
|
*/
|
|
int zrdata(register char *buf, int length)
|
|
{
|
|
register int c;
|
|
register unsigned short crc;
|
|
register char *end;
|
|
register int d;
|
|
|
|
switch (Crc32r) {
|
|
case 1:
|
|
return zrdat32(buf, length);
|
|
case 2:
|
|
return zrdatr32(buf, length);
|
|
}
|
|
|
|
crc = Rxcount = 0; end = buf + length;
|
|
while (buf <= end) {
|
|
if ((c = zdlread()) & ~0377) {
|
|
crcfoo:
|
|
switch (c) {
|
|
case GOTCRCE:
|
|
case GOTCRCG:
|
|
case GOTCRCQ:
|
|
case GOTCRCW:
|
|
crc = updcrc16((((d=c))&0377), crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
goto crcfoo;
|
|
crc = updcrc16(c, crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
goto crcfoo;
|
|
crc = updcrc16(c, crc);
|
|
if (crc & 0xFFFF) {
|
|
Syslog('+', "Zmodem zrdata: Bad CRC");
|
|
return TERROR;
|
|
}
|
|
Rxcount = length - (end - buf);
|
|
Syslog('z', "zrdata: %d %s", Rxcount, Zendnames[(d-GOTCRCE)&3]);
|
|
return d;
|
|
case GOTCAN:
|
|
Syslog('+', "Zmodem: Sender Canceled");
|
|
return ZCAN;
|
|
case TIMEOUT:
|
|
Syslog('+', "Zmodem: TIMEOUT receiving data");
|
|
return c;
|
|
case HANGUP:
|
|
Syslog('+', "Zmodem: Carrier lost while receiving");
|
|
return c;
|
|
default:
|
|
garbitch();
|
|
return c;
|
|
}
|
|
}
|
|
*buf++ = c;
|
|
crc = updcrc16(c, crc);
|
|
}
|
|
Syslog('+', "Zmodem: Data subpacket too long");
|
|
return TERROR;
|
|
}
|
|
|
|
|
|
|
|
int zrdat32(register char *buf, int length)
|
|
{
|
|
register int c;
|
|
register unsigned int crc;
|
|
register char *end;
|
|
register int d;
|
|
|
|
crc = 0xFFFFFFFFL; Rxcount = 0; end = buf + length;
|
|
while (buf <= end) {
|
|
if ((c = zdlread()) & ~0377) {
|
|
crcfoo:
|
|
switch (c) {
|
|
case GOTCRCE:
|
|
case GOTCRCG:
|
|
case GOTCRCQ:
|
|
case GOTCRCW:
|
|
d = c; c &= 0377;
|
|
crc = updcrc32(c, crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
goto crcfoo;
|
|
crc = updcrc32(c, crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
goto crcfoo;
|
|
crc = updcrc32(c, crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
goto crcfoo;
|
|
crc = updcrc32(c, crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
goto crcfoo;
|
|
crc = updcrc32(c, crc);
|
|
if (crc != 0xDEBB20E3) {
|
|
Syslog('+', "Zmodem zrdat32: Bad CRC");
|
|
return TERROR;
|
|
}
|
|
Rxcount = length - (end - buf);
|
|
|
|
Syslog('z', "zrdat32: %d %s", Rxcount, Zendnames[(d-GOTCRCE)&3]);
|
|
|
|
return d;
|
|
case GOTCAN:
|
|
Syslog('+', "Zmodem: Sender Canceled");
|
|
return ZCAN;
|
|
case TIMEOUT:
|
|
Syslog('+', "Zmodem: TIMEOUT");
|
|
return c;
|
|
case HANGUP:
|
|
Syslog('+', "Zmodem: Carrier lost while receiving");
|
|
return c;
|
|
default:
|
|
garbitch();
|
|
return c;
|
|
}
|
|
}
|
|
*buf++ = c;
|
|
crc = updcrc32(c, crc);
|
|
}
|
|
Syslog('+', "Zmodem: Data subpacket too long");
|
|
return TERROR;
|
|
}
|
|
|
|
|
|
|
|
void garbitch(void)
|
|
{
|
|
Syslog('+', "Zmodem: Garbled data subpacket");
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Read a ZMODEM header to hdr, either binary or hex.
|
|
*
|
|
* Set Rxhlen to size of header (default 4) (valid if good hdr)
|
|
* On success, set Zmodem to 1, set Rxpos and return type of header.
|
|
* Otherwise return negative on error.
|
|
* Return ERROR instantly if ZCRCW sequence, for fast error recovery.
|
|
*/
|
|
int zgethdr(char *shdr)
|
|
{
|
|
register int c, n, cancount;
|
|
|
|
int Zrwindow = 1400;
|
|
int Baudrate = 9600;
|
|
n = Zrwindow + Baudrate;
|
|
Rxframeind = Rxtype = 0;
|
|
|
|
startover:
|
|
cancount = 5;
|
|
again:
|
|
/*
|
|
* Return immediate ERROR if ZCRCW sequence seen
|
|
*/
|
|
if (((c = GETCHAR(Rxtimeout)) < 0) && (c != TIMEOUT))
|
|
goto fifi;
|
|
else switch(c) {
|
|
case 021: case 0221:
|
|
goto again;
|
|
case HANGUP:
|
|
case TIMEOUT:
|
|
goto fifi;
|
|
case CAN:
|
|
gotcan:
|
|
if (--cancount <= 0) {
|
|
c = ZCAN; goto fifi;
|
|
}
|
|
switch (c = GETCHAR(Rxtimeout)) {
|
|
case TIMEOUT:
|
|
goto again;
|
|
case ZCRCW:
|
|
switch (GETCHAR(Rxtimeout)) {
|
|
case TIMEOUT:
|
|
c = TERROR; goto fifi;
|
|
case HANGUP:
|
|
goto fifi;
|
|
default:
|
|
goto agn2;
|
|
}
|
|
case HANGUP:
|
|
goto fifi;
|
|
default:
|
|
break;
|
|
case CAN:
|
|
if (--cancount <= 0) {
|
|
c = ZCAN; goto fifi;
|
|
}
|
|
goto again;
|
|
}
|
|
/* **** FALL THRU TO **** */
|
|
default:
|
|
agn2:
|
|
#define GCOUNT (-4)
|
|
if ( --n == 0) {
|
|
c = GCOUNT; goto fifi;
|
|
}
|
|
goto startover;
|
|
case ZPAD|0200: /* This is what we want. */
|
|
Not8bit = c;
|
|
case ZPAD: /* This is what we want. */
|
|
break;
|
|
}
|
|
cancount = 5;
|
|
splat:
|
|
switch (c = noxrd7()) {
|
|
case ZPAD:
|
|
goto splat;
|
|
case HANGUP:
|
|
case TIMEOUT:
|
|
goto fifi;
|
|
default:
|
|
goto agn2;
|
|
case ZDLE: /* This is what we want. */
|
|
break;
|
|
}
|
|
|
|
|
|
Rxhlen = 4; /* Set default length */
|
|
Rxframeind = c = noxrd7();
|
|
switch (c) {
|
|
case ZVBIN32:
|
|
if ((Rxhlen = c = zdlread()) < 0)
|
|
goto fifi;
|
|
if (c > ZMAXHLEN)
|
|
goto agn2;
|
|
Crc32r = 1; c = zrbhd32(shdr); break;
|
|
case ZBIN32:
|
|
if (Usevhdrs)
|
|
goto agn2;
|
|
Crc32r = 1; c = zrbhd32(shdr); break;
|
|
case ZVBINR32:
|
|
if ((Rxhlen = c = zdlread()) < 0)
|
|
goto fifi;
|
|
if (c > ZMAXHLEN)
|
|
goto agn2;
|
|
Crc32r = 2; c = zrbhd32(shdr); break;
|
|
case ZBINR32:
|
|
if (Usevhdrs)
|
|
goto agn2;
|
|
Crc32r = 2; c = zrbhd32(shdr); break;
|
|
case HANGUP:
|
|
case TIMEOUT:
|
|
goto fifi;
|
|
case ZVBIN:
|
|
if ((Rxhlen = c = zdlread()) < 0)
|
|
goto fifi;
|
|
if (c > ZMAXHLEN)
|
|
goto agn2;
|
|
Crc32r = 0; c = zrbhdr(shdr); break;
|
|
case ZBIN:
|
|
if (Usevhdrs)
|
|
goto agn2;
|
|
Crc32r = 0; c = zrbhdr(shdr); break;
|
|
case ZVHEX:
|
|
if ((Rxhlen = c = zgethex()) < 0)
|
|
goto fifi;
|
|
if (c > ZMAXHLEN)
|
|
goto agn2;
|
|
Crc32r = 0; c = zrhhdr(shdr); break;
|
|
case ZHEX:
|
|
if (Usevhdrs)
|
|
goto agn2;
|
|
Crc32r = 0; c = zrhhdr(shdr); break;
|
|
case CAN:
|
|
goto gotcan;
|
|
default:
|
|
goto agn2;
|
|
}
|
|
for (n = Rxhlen; ++n < ZMAXHLEN; ) /* Clear unused hdr bytes */
|
|
shdr[n] = 0;
|
|
Rxpos = shdr[ZP3] & 0377;
|
|
Rxpos = (Rxpos<<8) + (shdr[ZP2] & 0377);
|
|
Rxpos = (Rxpos<<8) + (shdr[ZP1] & 0377);
|
|
Rxpos = (Rxpos<<8) + (shdr[ZP0] & 0377);
|
|
fifi:
|
|
switch (c) {
|
|
case GOTCAN:
|
|
c = ZCAN;
|
|
/* **** FALL THRU TO **** */
|
|
case ZNAK:
|
|
case ZCAN:
|
|
case TERROR:
|
|
case TIMEOUT:
|
|
case HANGUP:
|
|
Syslog('+', "Zmodem: Got %s", frametypes[c+FTOFFSET]);
|
|
/* **** FALL THRU TO **** */
|
|
default:
|
|
if (c >= -FTOFFSET && c <= FRTYPES)
|
|
Syslog('z', "zgethdr: %c %d %s %ld", Rxframeind, Rxhlen, frametypes[c+FTOFFSET], Rxpos);
|
|
else
|
|
Syslog('z', "zgethdr: %c %d %ld", Rxframeind, c, Rxpos);
|
|
}
|
|
/* Use variable length headers if we got one */
|
|
if (c >= 0 && c <= FRTYPES && Rxframeind & 040)
|
|
Usevhdrs = 1;
|
|
return c;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Receive a binary style header (type and position)
|
|
*/
|
|
int zrbhdr(register char *shdr)
|
|
{
|
|
register int c, n;
|
|
register unsigned short crc;
|
|
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
Rxtype = c;
|
|
crc = updcrc16(c, 0);
|
|
|
|
for (n=Rxhlen; --n >= 0; ++shdr) {
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
crc = updcrc16(c, crc);
|
|
*shdr = c;
|
|
}
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
crc = updcrc16(c, crc);
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
crc = updcrc16(c, crc);
|
|
if (crc & 0xFFFF) {
|
|
Syslog('+', "Zmodem zrbhdr: Bad CRC");
|
|
return TERROR;
|
|
}
|
|
return Rxtype;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Receive a binary style header (type and position) with 32 bit FCS
|
|
*/
|
|
int zrbhd32(register char *shdr)
|
|
{
|
|
register int c, n;
|
|
register unsigned int crc;
|
|
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
Rxtype = c;
|
|
crc = 0xFFFFFFFFL; crc = updcrc32(c, crc);
|
|
|
|
for (n=Rxhlen; --n >= 0; ++shdr) {
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
crc = updcrc32(c, crc);
|
|
*shdr = c;
|
|
}
|
|
for (n=4; --n >= 0;) {
|
|
if ((c = zdlread()) & ~0377)
|
|
return c;
|
|
crc = updcrc32(c, crc);
|
|
}
|
|
if (crc != 0xDEBB20E3) {
|
|
Syslog('+', "Zmodem zrbhd32: Bad CRC");
|
|
return TERROR;
|
|
}
|
|
return Rxtype;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Receive a hex style header (type and position)
|
|
*/
|
|
int zrhhdr(char *shdr)
|
|
{
|
|
register int c;
|
|
register unsigned short crc;
|
|
register int n;
|
|
|
|
if ((c = zgethex()) < 0)
|
|
return c;
|
|
Rxtype = c;
|
|
crc = updcrc16(c, 0);
|
|
|
|
for (n=Rxhlen; --n >= 0; ++shdr) {
|
|
if ((c = zgethex()) < 0)
|
|
return c;
|
|
crc = updcrc16(c, crc);
|
|
*shdr = c;
|
|
}
|
|
if ((c = zgethex()) < 0)
|
|
return c;
|
|
crc = updcrc16(c, crc);
|
|
if ((c = zgethex()) < 0)
|
|
return c;
|
|
crc = updcrc16(c, crc);
|
|
if (crc & 0xFFFF) {
|
|
Syslog('+', "Zmodem zrhhdr: Bad CRC");
|
|
return TERROR;
|
|
}
|
|
switch (c = GETCHAR(Rxtimeout)) {
|
|
case 0215:
|
|
Not8bit = c;
|
|
/* **** FALL THRU TO **** */
|
|
case 015:
|
|
/* Throw away possible cr/lf */
|
|
switch (c = GETCHAR(Rxtimeout)) {
|
|
case 012:
|
|
Not8bit |= c;
|
|
}
|
|
}
|
|
if (c < 0)
|
|
return c;
|
|
return Rxtype;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send a byte as two hex digits
|
|
*/
|
|
void zputhex(register int c)
|
|
{
|
|
static char digits[] = "0123456789abcdef";
|
|
|
|
BUFFER_BYTE(digits[(c&0xF0)>>4]);
|
|
BUFFER_BYTE(digits[(c)&0xF]);
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send character c with ZMODEM escape sequence encoding.
|
|
* Escape XON, XOFF. Escape CR following @ (Telenet net escape)
|
|
*/
|
|
void zsendline(int c)
|
|
{
|
|
/* Quick check for non control characters */
|
|
if (c & 0140)
|
|
BUFFER_BYTE(lastsent = c);
|
|
else {
|
|
switch (c &= 0377) {
|
|
case ZDLE:
|
|
BUFFER_BYTE(ZDLE);
|
|
BUFFER_BYTE (lastsent = (c ^= 0100));
|
|
break;
|
|
case 015:
|
|
case 0215:
|
|
if (!Zctlesc && (lastsent & 0177) != '@')
|
|
goto sendit;
|
|
/* **** FALL THRU TO **** */
|
|
case 020:
|
|
case 021:
|
|
case 023:
|
|
case 0220:
|
|
case 0221:
|
|
case 0223:
|
|
BUFFER_BYTE(ZDLE);
|
|
c ^= 0100;
|
|
sendit:
|
|
BUFFER_BYTE(lastsent = c);
|
|
break;
|
|
default:
|
|
if (Zctlesc && ! (c & 0140)) {
|
|
BUFFER_BYTE(ZDLE);
|
|
c ^= 0100;
|
|
}
|
|
BUFFER_BYTE(lastsent = c);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/* Decode two lower case hex digits into an 8 bit byte value */
|
|
int zgethex(void)
|
|
{
|
|
register int c;
|
|
|
|
c = zgeth1();
|
|
return c;
|
|
}
|
|
|
|
|
|
|
|
int zgeth1(void)
|
|
{
|
|
register int c, n;
|
|
|
|
if ((c = noxrd7()) < 0)
|
|
return c;
|
|
n = c - '0';
|
|
if (n > 9)
|
|
n -= ('a' - ':');
|
|
if (n & ~0xF)
|
|
return TERROR;
|
|
if ((c = noxrd7()) < 0)
|
|
return c;
|
|
c -= '0';
|
|
if (c > 9)
|
|
c -= ('a' - ':');
|
|
if (c & ~0xF)
|
|
return TERROR;
|
|
c += (n<<4);
|
|
return c;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Read a byte, checking for ZMODEM escape encoding
|
|
* including CAN*5 which represents a quick abort
|
|
*/
|
|
int zdlread(void)
|
|
{
|
|
register int c;
|
|
|
|
again:
|
|
/* Quick check for non control characters */
|
|
if ((c = GETCHAR(Rxtimeout)) & 0140)
|
|
return c;
|
|
switch (c) {
|
|
case ZDLE:
|
|
break;
|
|
case 023:
|
|
case 0223:
|
|
case 021:
|
|
case 0221:
|
|
goto again;
|
|
default:
|
|
if (Zctlesc && !(c & 0140)) {
|
|
goto again;
|
|
}
|
|
return c;
|
|
}
|
|
again2:
|
|
if ((c = GETCHAR(Rxtimeout)) < 0)
|
|
return c;
|
|
if (c == CAN && (c = GETCHAR(Rxtimeout)) < 0)
|
|
return c;
|
|
if (c == CAN && (c = GETCHAR(Rxtimeout)) < 0)
|
|
return c;
|
|
if (c == CAN && (c = GETCHAR(Rxtimeout)) < 0)
|
|
return c;
|
|
switch (c) {
|
|
case CAN:
|
|
return GOTCAN;
|
|
case ZCRCE:
|
|
case ZCRCG:
|
|
case ZCRCQ:
|
|
case ZCRCW:
|
|
return (c | GOTOR);
|
|
case ZRUB0:
|
|
return 0177;
|
|
case ZRUB1:
|
|
return 0377;
|
|
case 023:
|
|
case 0223:
|
|
case 021:
|
|
case 0221:
|
|
goto again2;
|
|
default:
|
|
if (Zctlesc && ! (c & 0140)) {
|
|
goto again2;
|
|
}
|
|
if ((c & 0140) == 0100)
|
|
return (c ^ 0100);
|
|
break;
|
|
}
|
|
Syslog('+', "Zmodem: Bad escape sequence 0x%x", c);
|
|
return TERROR;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Read a character from the modem line with timeout.
|
|
* Eat parity, XON and XOFF characters.
|
|
*/
|
|
int noxrd7(void)
|
|
{
|
|
register int c;
|
|
|
|
for (;;) {
|
|
if ((c = GETCHAR(Rxtimeout)) < 0)
|
|
return c;
|
|
switch (c &= 0177) {
|
|
case XON:
|
|
case XOFF:
|
|
continue;
|
|
default:
|
|
if (Zctlesc && !(c & 0140))
|
|
continue;
|
|
case '\r':
|
|
case '\n':
|
|
case ZDLE:
|
|
return c;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Store long integer pos in Txhdr
|
|
*/
|
|
void stohdr(int pos)
|
|
{
|
|
Txhdr[ZP0] = pos;
|
|
Txhdr[ZP1] = pos>>8;
|
|
Txhdr[ZP2] = pos>>16;
|
|
Txhdr[ZP3] = pos>>24;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Recover a long integer from a header
|
|
*/
|
|
int rclhdr(register char *shdr)
|
|
{
|
|
register int l;
|
|
|
|
l = (shdr[ZP3] & 0377);
|
|
l = (l << 8) | (shdr[ZP2] & 0377);
|
|
l = (l << 8) | (shdr[ZP1] & 0377);
|
|
l = (l << 8) | (shdr[ZP0] & 0377);
|
|
return l;
|
|
}
|
|
|
|
/* End of zmmisc.c */
|