* $enable_mass_delete = true;
*
* Notice that mass deletes are not enabled on a per-server basis, but this
* function checks that the sever is not in a read-only state as well.
*
* @param int $server_id The ID of the server of interest.
* @return bool
*/
function mass_delete_enabled( $server_id )
{
global $enable_mass_delete;
if( check_server_id( $server_id ) &&
pla_ldap_connect( $server_id ) &&
have_auth_info( $server_id ) &&
! is_server_read_only( $server_id ) &&
isset( $enable_mass_delete ) &&
true === $enable_mass_delete )
return true;
else
return false;
}
/**
* Returns true if the user has configured PLA to show
* helpful hints with the $show_hints setting.
* This is configured in config.php thus:
*
* $show_hints = true;
*
*
* @return bool
*/
function show_hints()
{
global $show_hints;
if( isset( $show_hints ) && $show_hints === true )
return true;
}
/**
* Determines if the user has enabled auto uidNumbers for the specified server ID.
*
* @param int $server_id The id of the server of interest.
* @return bool True if auto uidNumbers are enabled, false otherwise.
*/
function auto_uid_numbers_enabled( $server_id )
{
global $servers;
if( isset( $servers[$server_id]['enable_auto_uid_numbers'] ) &&
true == $servers[$server_id]['enable_auto_uid_numbers'] )
return true;
else
return false;
}
/**
* For hosts who have 'enable_auto_uid_numbers' set to true, this function will
* get the next available uidNumber using the host's preferred mechanism
* (uidpool or search). The uidpool mechanism uses a user-configured entry in
* the LDAP server to store the last used uidNumber. This mechanism simply fetches
* and increments and returns that value. The search mechanism is more complicated
* and slow. It searches all entries that have uidNumber set, finds the smalles and
* "fills in the gaps" by incrementing the smallest uidNumber until an unused value
* is found. Both mechanisms do NOT prevent race conditions or toe-stomping, so
* care must be taken when actually creating the entry to check that the uidNumber
* returned here has not been used in the mean time. Note that the two different
* mechanisms may (will!) return different values as they use different algorithms
* to arrive at their result. Do not be alarmed if (when!) this is the case.
*
* Also note that both algorithms are susceptible to a race condition. If two admins
* are adding users simultaneously, the users may get identical uidNumbers with this
* function.
*
* See config.php.example for more notes on the two auto uidNumber mechanisms.
*
* @param int $server_id The ID of the server of interest.
* @return int
*
* @todo eliminate race condition at create time by re-running this function.
*/
function get_next_uid_number( $server_id )
{
global $servers, $lang;
// Some error checking
if( ! check_server_id( $server_id ) )
return false;
if( ! auto_uid_numbers_enabled( $server_id ) )
return false;
$server_name = isset( $servers[ $server_id ]['name'] ) ?
$servers[$server_id]['name'] :
"Server $server_id";
if( ! isset( $servers[ $server_id ]['enable_auto_uid_numbers'] ) )
return false;
if( ! isset( $servers[ $server_id ]['auto_uid_number_mechanism'] ) )
pla_error( sprintf($lang['auto_update_not_setup'], $server_name));
// Based on the configured mechanism, go get the next available uidNumber!
$mechanism = $servers[$server_id]['auto_uid_number_mechanism'];
//
// case 1: uidpool mechanism
//
if( 0 == strcasecmp( $mechanism, 'uidpool' ) ) {
if( ! isset( $servers[ $server_id ][ 'auto_uid_number_uid_pool_dn' ] ) )
pla_error( sprintf( $lang['uidpool_not_set'], $server_name ) );
$uid_pool_dn = $servers[ $server_id ][ 'auto_uid_number_uid_pool_dn' ];
if( ! dn_exists( $server_id, $uid_pool_dn ) )
pla_error( sprintf( $lang['uidpool_not_exist'] , $uid_pool_dn ) );
$next_uid_number = get_object_attr( $server_id, $uid_pool_dn, 'uidNumber' );
$next_uid_number = intval( $next_uid_number[ 0 ] );
$next_uid_number++;
return $next_uid_number;
//
// case 2: search mechanism
//
} elseif( 0 == strcasecmp( $mechanism, 'search' ) ) {
if( ! isset( $servers[ $server_id ][ 'auto_uid_number_search_base' ] ) )
pla_error( sprintf( $lang['specified_uidpool'] , $server_name ) );
$base_dn = $servers[ $server_id ][ 'auto_uid_number_search_base' ];
$filter = "(uidNumber=*)";
// Check see and use our alternate uid_dn and password if we have it.
if ( isset( $servers[ $server_id ][ 'auto_uid_number_search_dn' ] ) &&
isset( $servers[ $server_id ][ 'auto_uid_number_search_dn_pass' ] ) ) {
$con = @ldap_connect( $servers[$server_id]['host'], $servers[$server_id]['port'] );
@ldap_set_option( $con, LDAP_OPT_PROTOCOL_VERSION, 3 );
@ldap_set_option( $con, LDAP_OPT_REFERRALS, 0);
// Bind with the alternate ID.
$res = @ldap_bind( $con,
$servers[ $server_id ][ 'auto_uid_number_search_dn' ],
$servers[ $server_id ][ 'auto_uid_number_search_dn_pass' ] );
if (! $res) pla_error( sprintf( $lang['auto_uid_invalid_credential'] , $server_name ) );
$search = @ldap_search( $con, $base_dn, $filter, array('uidNumber'), 0, 0, 0, get_search_deref_setting() );
if( ! $search ) pla_error( sprintf( $lang['bad_auto_uid_search_base'], $server_name ) );
$search = @ldap_get_entries( $con, $search );
$res = @ldap_unbind( $con );
$results = array();
for( $i=0; $i<$search['count']; $i++ ) {
$entry = $search[$i];
$dn['dn'] = $entry['dn'];
$dn['uidnumber'] = $entry['uidnumber'][0];
$results[] = $dn;
}
} else {
$results = pla_ldap_search( $server_id, $filter, $base_dn, array('uidNumber'));
}
// lower-case all the inices so we can access them by name correctly
foreach( $results as $dn => $attrs )
foreach( $attrs as $attr => $vals ) {
unset( $results[$dn][$attr] );
$results[$dn][strtolower( $attr )] = $vals;
}
// construct a list of used uidNumbers
$uids = array();
foreach ($results as $result)
$uids[] = $result['uidnumber'];
$uids = array_unique( $uids );
if( count( $uids ) == 0 )
return false;
sort( $uids );
foreach( $uids as $uid )
$uid_hash[ $uid ] = 1;
// start with the least existing uidNumber and add 1
if (isset($servers[$server_id]['auto_uid_number_min'])) {
$uidNumber = $servers[$server_id]['auto_uid_number_min'];
} else {
$uidNumber = intval( $uids[0] ) + 1;
}
// this loop terminates as soon as we encounter the next available uidNumber
while( isset( $uid_hash[ $uidNumber ] ) )
$uidNumber++;
return $uidNumber;
//
// No other cases allowed. The user has an error in the configuration
//
} else {
pla_error( sprintf( $lang['auto_uid_invalid_value'] , $mechanism) );
}
}
/**
* Used to determine if the specified attribute is indeed a jpegPhoto. If the
* specified attribute is one that houses jpeg data, true is returned. Otherwise
* this function returns false.
*
* @param int $server_id The ID of the server hosuing the attribute of interest
* @param string $attr_name The name of the attribute to test.
* @return bool
* @see draw_jpeg_photos
*/
function is_jpeg_photo( $server_id, $attr_name )
{
// easy quick check
if( 0 == strcasecmp( $attr_name, 'jpegPhoto' ) ||
0 == strcasecmp( $attr_name, 'photo' ) )
return true;
// go to the schema and get the Syntax OID
require_once realpath( 'schema_functions.php' );
$schema_attr = get_schema_attribute( $server_id, $attr_name );
if( ! $schema_attr )
return false;
$oid = $schema_attr->getSyntaxOID();
$type = $schema_attr->getType();
if( 0 == strcasecmp( $type, 'JPEG' ) )
return true;
if( $oid == '1.3.6.1.4.1.1466.115.121.1.28' )
return true;
return false;
}
/**
* Given an attribute name and server ID number, this function returns
* whether the attrbiute contains boolean data. This is useful for
* developers who wish to display the contents of a boolean attribute
* with a drop-down.
*
* @param int $server_id The ID of the server of interest (required since
* this action requires a schema lookup on the server)
* @param string $attr_name The name of the attribute to test.
* @return bool
*/
function is_attr_boolean( $server_id, $attr_name )
{
$type = ( $schema_attr = get_schema_attribute( $server_id, $attr_name ) ) ?
$schema_attr->getType() :
null;
if( 0 == strcasecmp( 'boolean', $type ) ||
0 == strcasecmp( 'isCriticalSystemObject', $attr_name ) ||
0 == strcasecmp( 'showInAdvancedViewOnly', $attr_name ) )
return true;
else
return false;
}
/**
* Given an attribute name and server ID number, this function returns
* whether the attrbiute may contain binary data. This is useful for
* developers who wish to display the contents of an arbitrary attribute
* but don't want to dump binary data on the page.
*
* @param int $server_id The ID of the server of interest (required since
* this action requires a schema lookup on the server)
* @param string $attr_name The name of the attribute to test.
* @return bool
*
* @see is_jpeg_photo
*/
function is_attr_binary( $server_id, $attr_name )
{
$attr_name = strtolower( $attr_name );
/** Determining if an attribute is binary can be an expensive
operation. We cache the results for each attr name on each
server in the $attr_cache to speed up subsequent calls.
The $attr_cache looks like this:
Array
0 => Array
'objectclass' => false
'cn' => false
'usercertificate' => true
1 => Array
'jpegphoto' => true
'cn' => false
*/
static $attr_cache;
if( isset( $attr_cache[ $server_id ][ $attr_name ] ) )
return $attr_cache[ $server_id ][ $attr_name ];
if( $attr_name == 'userpassword' ) {
$attr_cache[ $server_id ][ $attr_name ] = false;
return false;
}
// Quick check: If the attr name ends in ";binary", then it's binary.
if( 0 == strcasecmp( substr( $attr_name, strlen( $attr_name ) - 7 ), ";binary" ) ) {
$attr_cache[ $server_id ][ $attr_name ] = true;
return true;
}
// See what the server schema says about this attribute
$schema_attr = get_schema_attribute( $server_id, $attr_name );
if( ! $schema_attr ) {
// Strangely, some attributeTypes may not show up in the server
// schema. This behavior has been observed in MS Active Directory.
$type = null;
$syntax = null;
} else {
$type = $schema_attr->getType();
$syntax = $schema_attr->getSyntaxOID();
}
if( 0 == strcasecmp( $type, 'Certificate' ) ||
0 == strcasecmp( $type, 'Binary' ) ||
0 == strcasecmp( $attr_name, 'usercertificate' ) ||
0 == strcasecmp( $attr_name, 'usersmimecertificate' ) ||
0 == strcasecmp( $attr_name, 'networkaddress' ) ||
0 == strcasecmp( $attr_name, 'objectGUID' ) ||
0 == strcasecmp( $attr_name, 'objectSID' ) ||
$syntax == '1.3.6.1.4.1.1466.115.121.1.10' ||
$syntax == '1.3.6.1.4.1.1466.115.121.1.28' ||
$syntax == '1.3.6.1.4.1.1466.115.121.1.5' ||
$syntax == '1.3.6.1.4.1.1466.115.121.1.8' ||
$syntax == '1.3.6.1.4.1.1466.115.121.1.9' ||
$syntax == '1.3.6.1.4.1.1466.115.121.1.40' ) {
$attr_cache[ $server_id ][ $attr_name ] = true;
return true;
} else {
$attr_cache[ $server_id ][ $attr_name ] = false;
return false;
}
}
/**
* Returns true if the specified attribute is configured as read only
* in config.php with the $read_only_attrs array.
* Attributes are configured as read-only in config.php thus:
*
* $read_only_attrs = array( "objectClass", "givenName" );
*
*
* @param string $attr The name of the attribute to test.
* @return bool
*/
function is_attr_read_only( $attr )
{
global $read_only_attrs;
$attr = trim( $attr );
if( '' === $attr )
return false;
if( ! isset( $read_only_attrs ) )
return false;
if( ! is_array( $read_only_attrs) )
return false;
foreach( $read_only_attrs as $attr_name )
if( 0 == strcasecmp( $attr, trim($attr_name) ) )
return true;
return false;
}
/**
* Returns true if the specified server is configured to be displayed
* in read only mode. If a user has logged in via anonymous bind, and
* config.php specifies anonymous_bind_implies_read_only as true, then
* this also returns true. Servers can be configured read-only in
* config.php thus:
*
* $server[$i]['read_only'] = true;
*
*
* @param int $server_id The ID of the server of interest from the $servers array in config.php
* @return bool
*/
function is_server_read_only( $server_id )
{
global $servers;
if( isset( $servers[$server_id]['read_only'] ) &&
$servers[$server_id]['read_only'] == true )
return true;
global $anonymous_bind_implies_read_only;
if( "anonymous" == get_logged_in_dn( $server_id ) &&
isset( $anonymous_bind_implies_read_only ) &&
$anonymous_bind_implies_read_only == true )
return true;
return false;
}
/**
* Given a DN and server ID, this function reads the DN's objectClasses and
* determines which icon best represents the entry. The results of this query
* are cached in a session variable so it is not run every time the tree
* browser changes, just when exposing new DNs that were not displayed
* previously. That means we can afford a little bit of inefficiency here
* in favor of coolness. :)
*
* This function returns a string like "country.png". All icon files are assumed
* to be contained in the /images/ directory of phpLDAPadmin.
*
* Developers are encouraged to add new icons to the images directory and modify
* this function as needed to suit their types of LDAP entries. If the modifications
* are general to an LDAP audience, the phpLDAPadmin team will gladly accept them
* as a patch.
*
* @param int $server_id The ID of the LDAP server housing the DN of interest.
* @param string $dn The DN of the entry whose icon you wish to fetch.
*
* @return string
*/
function get_icon( $server_id, $dn )
{
// fetch and lowercase all the objectClasses in an array
$object_classes = get_object_attr( $server_id, $dn, 'objectClass', true );
if( $object_classes === null || $object_classes === false || ! is_array( $object_classes ) )
$object_classes = array();
foreach( $object_classes as $i => $class )
$object_classes[$i] = strtolower( $class );
$rdn = get_rdn( $dn );
$rdn_parts = explode( '=', $rdn, 2 );
$rdn_value = isset( $rdn_parts[0] ) ? $rdn_parts[0] : null;
$rdn_attr = isset( $rdn_parts[1] ) ? $rdn_parts[1] : null;
unset( $rdn_parts );
// return icon filename based upon objectClass value
if( in_array( 'sambaaccount', $object_classes ) &&
'$' == $rdn{ strlen($rdn) - 1 } )
return 'nt_machine.png';
if( in_array( 'sambaaccount', $object_classes ) )
return 'nt_user.png';
elseif( in_array( 'person', $object_classes ) ||
in_array( 'organizationalperson', $object_classes ) ||
in_array( 'inetorgperson', $object_classes ) ||
in_array( 'account', $object_classes ) ||
in_array( 'posixaccount', $object_classes ) )
return 'user.png';
elseif( in_array( 'organization', $object_classes ) )
return 'o.png';
elseif( in_array( 'organizationalunit', $object_classes ) )
return 'ou.png';
elseif( in_array( 'organizationalrole', $object_classes ) )
return 'uid.png';
elseif( in_array( 'dcobject', $object_classes ) ||
in_array( 'domainrelatedobject', $object_classes ) ||
in_array( 'domain', $object_classes ) ||
in_array( 'builtindomain', $object_classes ))
return 'dc.png';
elseif( in_array( 'country', $object_classes ) )
return 'country.png';
elseif( in_array( 'jammvirtualdomain', $object_classes ) )
return 'mail.png';
elseif( in_array( 'locality', $object_classes ) )
return 'locality.png';
elseif( in_array( 'posixgroup', $object_classes ) ||
in_array( 'groupofnames', $object_classes ) ||
in_array( 'group', $object_classes ) )
return 'ou.png';
elseif( in_array( 'applicationprocess', $object_classes ) )
return 'process.png';
elseif( in_array( 'groupofuniquenames', $object_classes ) )
return 'uniquegroup.png';
elseif( in_array( 'iphost', $object_classes ) )
return 'host.png';
elseif( in_array( 'nlsproductcontainer', $object_classes ) )
return 'n.png';
elseif( in_array( 'ndspkikeymaterial', $object_classes ) )
return 'lock.png';
elseif( in_array( 'server', $object_classes ) )
return 'server-small.png';
elseif( in_array( 'volume', $object_classes ) )
return 'hard-drive.png';
elseif( in_array( 'ndscatcatalog', $object_classes ) )
return 'catalog.png';
elseif( in_array( 'resource', $object_classes ) )
return 'n.png';
elseif( in_array( 'ldapgroup', $object_classes ) )
return 'ldap-server.png';
elseif( in_array( 'ldapserver', $object_classes ) )
return 'ldap-server.png';
elseif( in_array( 'nisserver', $object_classes ) )
return 'ldap-server.png';
elseif( in_array( 'rbscollection', $object_classes ) )
return 'ou.png';
elseif( in_array( 'dfsconfiguration', $object_classes ) )
return 'nt_machine.png';
elseif( in_array( 'applicationsettings', $object_classes ) )
return 'server-settings.png';
elseif( in_array( 'container', $object_classes ) )
return 'folder.png';
elseif( in_array( 'samServer', $object_classes ) )
return 'server-small.png';
elseif( in_array( 'lostandfound', $object_classes ) )
return 'find.png';
elseif( in_array( 'infrastructureupdate', $object_classes ) )
return 'server-small.png';
elseif( in_array( 'filelinktracking', $object_classes ) )
return 'files.png';
elseif( in_array( 'automountmap', $object_classes ) )
return 'hard-drive.png';
elseif( 0 === strpos( $rdn_value, "ipsec" ) ||
0 == strcasecmp( $rdn_value, "IP Security" ) ||
0 == strcasecmp( $rdn_value, "MSRADIUSPRIVKEY Secret" ) ||
0 === strpos( $rdn_value, "BCKUPKEY_" ) )
return 'lock.png';
elseif( 0 == strcasecmp( $rdn_value, "MicrosoftDNS" ) )
return 'dc.png';
// Oh well, I don't know what it is. Use a generic icon.
else
return 'object.png';
}
/**
* Does the same thing as get_icon(), but it tries to fetch the icon name from the
* tree_icons session variable first. If not found, resorts to get_icon() and stores
* the icon nmae in the tree_icons session before returing the icon.
*
* @param int $server_id The ID of the server housing the DN of interest.
* @param string $dn The DN of the entry of interest.
*
* @return string
*
* @see get_icon
*/
function get_icon_use_cache( $server_id, $dn )
{
if( array_key_exists( 'tree_icons', $_SESSION ) ) {
if( array_key_exists( $server_id, $_SESSION['tree_icons'] ) &&
array_key_exists( $dn, $_SESSION['tree_icons'][$server_id] ) )
{
return $_SESSION['tree_icons'][ $server_id ][ $dn ];
} else {
$icon = get_icon( $server_id, $dn );
$_SESSION['tree_icons'][ $server_id ][ $dn ] = $icon;
return $icon;
}
}
}
/**
* Given a server_id, returns whether or not we have enough information
* to authenticate against the server. For example, if the user specifies
* auth_type of 'cookie' in the config for that server, it checks the $_COOKIE array to
* see if the cookie username and password is set for the server. If the auth_type
* is 'session', the $_SESSION array is checked.
*
* There are three cases for this function depending on the auth_type configured for
* the specified server. If the auth_type is form or http, then get_logged_in_dn() is
* called to verify that the user has logged in. If the auth_type is config, then the
* $servers array in config.php is checked to ensure that the user has specified
* login information. In any case, if phpLDAPadmin has enough information to login
* to the server, true is returned. Otherwise false is returned.
*
* @param int $server_id
* @return bool
* @see get_logged_in_dn
*/
function have_auth_info( $server_id )
{
global $servers;
if( ! check_server_id( $server_id ) )
return false;
$server = $servers[$server_id];
// For session or cookie auth_types, we check the session or cookie to see if a user has logged in.
if( isset( $server['auth_type'] ) && ( $server['auth_type'] == 'session' || $server['auth_type'] == 'cookie' ) ) {
// we don't look at get_logged_in_pass() cause it may be null for anonymous binds
// get_logged_in_dn() will never return null if someone is really logged in.
if( get_logged_in_dn( $server_id ) )
return true;
else
return false;
}
// whether or not the login_dn or pass is specified, we return
// true here. (if they are blank, we do an anonymous bind anyway)
elseif( ! isset( $server['auth_type'] ) || $server['auth_type'] == 'config' ) {
return true;
}
else
{
global $lang;
pla_error( sprintf( $lang['error_auth_type_config'], htmlspecialchars($server['auth_type'])) );
}
}
/**
* Fetches the password of the currently logged in user (for auth_types "form" and "http" only)
* or false if the current login is anonymous.
*
* @param int $server_id The ID of the server of interest.
*
* @return string
*
* @see have_auth_info
* @see get_logged_in_dn
*/
function get_logged_in_pass( $server_id )
{
global $servers;
if( ! is_numeric( $server_id ) )
return false;
if( ! isset( $servers[ $server_id ][ 'auth_type' ] ) )
return false;
$auth_type = $servers[ $server_id ][ 'auth_type' ];
switch( $auth_type ) {
case 'cookie':
$cookie_name = 'pla_login_pass_' . $server_id;
$pass = isset( $_COOKIE[ $cookie_name ] ) ? $_COOKIE[ $cookie_name ] : false;
if( $pass == '0' )
return null;
else
return $pass;
break;
case 'session':
$session_var_name = 'pla_login_pass_' . $server_id;
$pass = isset( $_SESSION[ $session_var_name ] ) ? $_SESSION[ $session_var_name ] : false;
if( $pass == '0' )
return null;
else
return $pass;
break;
case 'config':
return false;
break;
default:
global $lang;
pla_error( sprintf( $lang['unknown_auth_type'], htmlspecialchars( $auth_type ) ) );
}
}
/**
* Returns the DN who is logged in currently to the given server, which may
* either be a DN or the string 'anonymous'. This applies only for auth_types
* "form" and "http".
* One place where this function is used is the tree viewer:
* After a user logs in, the text "Logged in as: " is displayed under the server
* name. This information is retrieved from this function.
*
* @param int $server_id The ID of the server of interest.
*
* @return string
*
* @see have_auth_info
* @see get_logged_in_pass
*/
function get_logged_in_dn( $server_id )
{
global $servers;
if( ! is_numeric( $server_id ) )
return false;
if( ! isset( $servers[ $server_id ][ 'auth_type' ] ) )
return false;
$auth_type = $servers[ $server_id ][ 'auth_type' ];
switch( $auth_type ) {
case 'cookie':
$cookie_name = 'pla_login_dn_' . $server_id;
if( isset( $_COOKIE[ $cookie_name ] ) ) {
$dn = $_COOKIE[ $cookie_name ];
} else {
return false;
}
return $dn;
break;
case 'session':
$session_var_name = 'pla_login_dn_' . $server_id;
if( isset( $_SESSION[ $session_var_name ] ) ) {
$dn = $_SESSION[ $session_var_name ];
return $dn;
} else {
return false;
}
break;
case 'config':
return false;
break;
default:
global $lang;
pla_error( sprintf( $lang['unknown_auth_type'], htmlspecialchars( $auth_type ) ) );
}
}
/**
* Appends a servers base to a "sub" dn or returns the base.
* If $get_base is true, return at least the base, otherwise null.
*/
function expand_dn_with_base( $server_id, $sub_dn, $conn = null, $get_base = true )
{
global $servers;
if( ! check_server_id( $server_id ) )
return false;
$empty_str = ( is_null($sub_dn) || ( ( $len = strlen( trim( $sub_dn ) ) ) == 0 ) );
if ( $empty_str ) {
// If we have no string and want not base
if ( ! $get_base )
return null;
} // If we have a string which doesn't need a base
elseif ( $sub_dn[$len - 1] != ',' )
return $sub_dn;
if( ( $empty_str && $get_base ) || ! $empty_str )
{
if( isset($servers[$server_id]['base']) ) {
$base = $servers[$server_id]['base'];
if ( strlen( trim( $base ) ) == 0 )
$base = try_to_get_root_dn( $server_id, $conn );
} else { $base = try_to_get_root_dn( $server_id, $conn ); }
if ( $base )
return ( ! $empty_str ) ? $sub_dn . $base : $base;
}
return null;
}
/**
* Logs into the specified server using the auth_type configured for that server using
* ldap_connect() and ldap_bind() from the PHP LDAP API.
* If anonymous is true bind information (user / pass) is ignored (= anonymous).
* If anonymous is null a new bind is done (i.e. user changed).
* Returns true on success or false on failure.
*
* @param int $server_id The ID of the server of interest.
* @param bool $anonymous Set to override server config
* @return bool
*
* @see get_logged_in_dn
* @see get_logged_in_pass
* @see have_auth_info
* @see check_server_id
*/
function pla_ldap_connect( $server_id, $anonymous = false )
{
if( ! check_server_id( $server_id ) )
return false;
if( ! $anonymous && ! have_auth_info( $server_id ) )
return false;
global $servers, $lang;
// cache the connection, so if we are called multiple
// times, we don't have to reauthenticate with the LDAP server
static $conns;
// We can reuse connections for multiple binds if we don't ldap_unbind
if( isset( $conns[$server_id] ) ) {
$conn = $conns[$server_id]['conn'];
$status = $conns[$server_id]['stat'];
// Status tells us, if we can use the same bind
if( !is_null($status) && $status == $anonymous )
return $conn;
} else {
$host = $servers[$server_id]['host'];
$port = isset( $servers[$server_id]['port'] ) ? $servers[ $server_id ][ 'port' ] : false;
if( $port )
$conn = @ldap_connect( $host, $port );
else
$conn = @ldap_connect( $host );
$conn or pla_error( sprintf( $lang['could_not_connect_to_host_on_port'], htmlspecialchars( $host ), htmlspecialchars( $port ) ) );
// go with LDAP version 3 if possible (needed for renaming and Novell schema fetching)
@ldap_set_option( $conn, LDAP_OPT_PROTOCOL_VERSION, 3 );
// Disabling this makes it possible to browse the tree for Active Directory, and seems
// to not affect other LDAP servers (tested with OpenLDAP) as phpLDAPadmin explicitly
// specifies deref behavior for each ldap_search operation.
@ldap_set_option( $conn, LDAP_OPT_REFERRALS, 0);
// try to fire up TLS is specified in the config
if( tls_enabled( $server_id ) ) {
global $lang;
function_exists( 'ldap_start_tls' ) or pla_error( $lang['php_install_not_supports_tls'] );
@ldap_start_tls( $conn ) or pla_error( $lang['could_not_start_tls']);
}
// store the cached connection resource
$conns[$server_id]['conn'] = $conn;
$conns[$server_id]['stat'] = null;
}
if( $anonymous == true ) {
$login_dn = null;
$login_pass = null;
} // grab the auth info based on the auth_type for this server
elseif( $servers[ $server_id ][ 'auth_type' ] == 'config' ) {
$login_dn = $servers[$server_id]['login_dn'];
$login_pass = $servers[$server_id]['login_pass'];
$login_dn = expand_dn_with_base( $server_id, $login_dn, $conn, false );
} else {
$login_dn = get_logged_in_dn( $server_id );
$login_pass = get_logged_in_pass( $server_id );
// Was this an anonyous bind (the cookie stores 0 if so)?
if( 'anonymous' == $login_dn ) {
$login_dn = null;
$login_pass = null;
}
}
$res = @ldap_bind( $conn, $login_dn, $login_pass );
if( ! $res ) return false;
// store the bind status
$conns[$server_id]['stat'] = $anonymous;
return $conn;
}
/**
* Gets a list of child entries for an entry. Given a DN, this function fetches the list of DNs of
* child entries one level beneath the parent. For example, for the following tree:
*
*
* dc=example,dc=com
* ou=People
* cn=Dave
* cn=Fred
* cn=Joe
* ou=More People
* cn=Mark
* cn=Bob
*
*
* Calling get_container_contents( $server_id, "ou=people,dc=example,dc=com" )
* would return the following list:
*
*
* cn=Dave
* cn=Fred
* cn=Joe
* ou=More People
*
*
* @param int $server_id The ID of the server housing the entry of interest
* @param string $dn The DN of the entry whose children to return.
* @param int $size_limit (optional) The maximum number of entries to return.
* If unspecified, no limit is applied to the number of entries in the returned.
* @param string $filter (optional) An LDAP filter to apply when fetching children, example: "(objectClass=inetOrgPerson)"
* @return array An array of DN strings listing the immediate children of the specified entry.
*/
function get_container_contents( $server_id, $dn, $size_limit=0, $filter='(objectClass=*)', $deref=LDAP_DEREF_ALWAYS )
{
$con = pla_ldap_connect( $server_id );
if( ! $con ) return false;
// echo "get_container_contents( $server_id, $dn, $size_limit, $filter, $deref )\n";
$search = @ldap_list( $con, $dn, $filter, array( 'dn' ), 1, $size_limit, 0, $deref );
if( ! $search )
return array();
$search = ldap_get_entries( $con, $search );
$return = array();
for( $i=0; $i<$search['count']; $i++ ) {
$entry = $search[$i];
$dn = $entry['dn'];
$return[] = $dn;
}
return $return;
}
/**
* Builds the initial tree that is stored in the session variable 'tree'.
* Simply returns an array with an entry for each active server in
* config.php. The structure of the returned array is simple, and looks like
* this:
*
* Array (
* 0 => Array (
* dc=example,dc=com => "dcobject.png"
* ),
* 1 => Array (
* o=Corporation => "o.png"
* )
* )
*
* This function is not meant as a user callable function, but rather a convenient, automated method for
* setting up the initial data structure for the tree viewer's icon cache.
*/
function build_initial_tree()
{
global $servers;
$tree = array();
foreach( $servers as $id => $server ) {
if( $server['host'] == '' ) {
continue;
}
$tree[$id] = array();
}
return $tree;
}
/**
* Builds the initial array that stores the icon-lookup for each server's DN in the tree browser. The returned
* array is then stored in the current session. The structure of the returned array is simple, and looks like
* this:
*
* Array
* (
* [0] => Array
(
* [dc=example,dc=com] => "dcobject.png"
* )
* [1] => Array
(
* [o=Corporation] => "o.png"
* )
* )
*
* This function is not meant as a user-callable function, but rather a convenient, automated method for
* setting up the initial data structure for the tree viewer's icon cache.
*/
function build_initial_tree_icons()
{
global $servers;
$tree_icons = array();
// initialize an empty array for each server
foreach( $servers as $id => $server ) {
if( $server['host'] == '' )
continue;
$tree_icons[ $id ] = array();
$tree_icons[ $id ][ $server['base'] ] = get_icon( $id, $server['base'] );
}
return $tree_icons;
}
/*
* Checks and fixes an initial session's tree cache if needed.
*
* This function is not meant as a user-callable function, but rather a convenient,
* automated method for checking the initial data structure of the session.
*/
function initialize_session_tree()
{
// From the PHP manual: If you use $_SESSION don't use
// session_register(), session_is_registered() or session_unregister()!
if( ! array_key_exists( 'tree', $_SESSION ) )
$_SESSION['tree'] = build_initial_tree();
if( ! array_key_exists( 'tree_icons', $_SESSION ) )
$_SESSION['tree_icons'] = build_initial_tree_icons();
// Make sure that the tree index is indeed well formed.
if( ! is_array( $_SESSION['tree'] ) )
$_SESSION['tree'] = build_initial_tree();
if( ! is_array( $_SESSION['tree_icons'] ) )
$_SESSION['tree_icons'] = build_initial_tree_icons();
}
/**
* Gets the operational attributes for an entry. Given a DN, this function fetches that entry's
* operational (ie, system or internal) attributes. These attributes include "createTimeStamp",
* "creatorsName", and any other attribute that the LDAP server sets automatically. The returned
* associative array is of this form:
*
* Array
* (
* [creatorsName] => Array
* (
* [0] => "cn=Admin,dc=example,dc=com"
* )
* [createTimeStamp]=> Array
* (
* [0] => "10401040130"
* )
* [hasSubordinates] => Array
* (
* [0] => "FALSE"
* )
* )
*
*
* @param int $server_id the ID of the server of interest.
* @param string $dn The DN of the entry whose interal attributes are desired.
* @param int $deref For aliases and referrals, this parameter specifies whether to
* follow references to the referenced DN or to fetch the attributes for
* the referencing DN. See http://php.net/ldap_search for the 4 valid
* options.
* @return array An associative array whose keys are attribute names and whose values
* are arrays of values for the aforementioned attribute.
*/
function get_entry_system_attrs( $server_id, $dn, $deref=LDAP_DEREF_NEVER )
{
$conn = pla_ldap_connect( $server_id );
if( ! $conn ) return false;
$attrs = array( 'creatorsname', 'createtimestamp', 'modifiersname',
'structuralObjectClass', 'entryUUID', 'modifytimestamp',
'subschemaSubentry', 'hasSubordinates', '+' );
$search = @ldap_read( $conn, $dn, '(objectClass=*)', $attrs, 0, 0, 0, $deref );
if( ! $search )
return false;
$entry = ldap_first_entry( $conn, $search );
if( ! $entry)
return false;
$attrs = ldap_get_attributes( $conn, $entry );
if( ! $attrs )
return false;
if( ! isset( $attrs['count'] ) )
return false;
$count = $attrs['count'];
unset( $attrs['count'] );
$return_attrs = array();
for( $i=0; $i<$count; $i++ ) {
$attr_name = $attrs[$i];
unset( $attrs[$attr_name]['count'] );
$return_attrs[$attr_name] = $attrs[$attr_name];
}
return $return_attrs;
}
/**
* Gets the attributes/values of an entry. Returns an associative array whose
* keys are attribute value names and whose values are arrays of values for
* said attribute. Optionally, callers may specify true for the parameter
* $lower_case_attr_names to force all keys in the associate array (attribute
* names) to be lower case.
*
* Sample return value of get_object_attrs( 0, "cn=Bob,ou=pepole,dc=example,dc=com" )
*
*
* Array
* (
* [objectClass] => Array
* (
* [0] => person
* [1] => top
* )
* [cn] => Array
* (
* [0] => Bob
* )
* [sn] => Array
* (
* [0] => Jones
* )
* [dn] => Array
* (
* [0] => cn=Bob,ou=pepole,dc=example,dc=com
* )
* )
*
*
* @param int $server_id The ID of the server of interest
* @param string $dn The distinguished name (DN) of the entry whose attributes/values to fetch.
* @param bool $lower_case_attr_names (optional) If true, all keys of the returned associative
* array will be lower case. Otherwise, they will be cased as the LDAP server returns
* them.
* @param int $deref For aliases and referrals, this parameter specifies whether to
* follow references to the referenced DN or to fetch the attributes for
* the referencing DN. See http://php.net/ldap_search for the 4 valid
* options.
* @return array
* @see get_entry_system_attrs
* @see get_object_attr
*/
function get_object_attrs( $server_id, $dn, $lower_case_attr_names=false, $deref=LDAP_DEREF_NEVER )
{
//echo "get_object_attrs( $server_id, $dn, $lower_case_attr_names )"; $conn = pla_ldap_connect( $server_id ); if( ! $conn ) return false; $search = @ldap_read( $conn, $dn, '(objectClass=*)', array( ), 0, 0, 0, $deref ); if( ! $search ) return false; $entry = ldap_first_entry( $conn, $search ); if( ! $entry ) return false; $attrs = ldap_get_attributes( $conn, $entry ); if( ! $attrs || $attrs['count'] == 0 ) return false; $num_attrs = $attrs['count']; unset( $attrs['count'] ); // strip numerical inices for( $i=0; $i<$num_attrs; $i++ ) unset( $attrs[$i] ); $return_array = array(); foreach( $attrs as $attr => $vals ) { if( $lower_case_attr_names ) $attr = strtolower( $attr ); if( is_attr_binary( $server_id, $attr ) ) $vals = ldap_get_values_len( $conn, $entry, $attr ); unset( $vals['count'] ); $return_array[ $attr ] = $vals; } ksort( $return_array ); return $return_array; } /** * Returns true if the passed string $temp contains all printable * ASCII characters. Otherwise (like if it contains binary data), * returns false. */ function is_printable_str($temp) { $len = strlen($temp); for ($i=0; $i<$len; $i++) { $ascii_val = ord( substr( $temp,$i,1 ) ); if( $ascii_val < 32 || $ascii_val > 126 ) return false; } return true; } /** * Much like get_object_attrs(), but only returns the values for * one attribute of an object. Example calls: * *
* print_r( get_object_attr( 0, "cn=Bob,ou=people,dc=example,dc=com", "sn" ) );
* // prints:
* // Array
* // (
* // [0] => "Smith"
* // )
*
* print_r( get_object_attr( 0, "cn=Bob,ou=people,dc=example,dc=com", "objectClass" ) );
* // prints:
* // Array
* // (
* // [0] => "top"
* // [1] => "person"
* // )
*
*
* @param int $server_id The ID of the server of interest
* @param string $dn The distinguished name (DN) of the entry whose attributes/values to fetch.
* @param string $attr The attribute whose value(s) to return (ie, "objectClass", "cn", "userPassword")
* @param bool $lower_case_attr_names (optional) If true, all keys of the returned associative
* array will be lower case. Otherwise, they will be cased as the LDAP server returns
* them.
* @param int $deref For aliases and referrals, this parameter specifies whether to
* follow references to the referenced DN or to fetch the attributes for
* the referencing DN. See http://php.net/ldap_search for the 4 valid
* options.
* @see get_object_attrs
*/
function get_object_attr( $server_id, $dn, $attr, $deref=LDAP_DEREF_NEVER )
{
/**
$attr = strtolower( $attr );
$attrs = get_object_attrs( $server_id, $dn, true );
if( isset( $attrs[$attr] ) )
return $attrs[$attr];
else
return false;
*/
//echo "get_object_attr( $server_id, $dn, $attr )"; $conn = pla_ldap_connect( $server_id ); if( ! $conn ) return false; $search = @ldap_read( $conn, $dn, '(objectClass=*)', array( $attr ), 0, 0, 0, $deref ); if( ! $search ) return false; $entry = ldap_first_entry( $conn, $search ); if( ! $entry ) return false; $attrs = ldap_get_attributes( $conn, $entry ); if( ! $attrs || $attrs['count'] == 0 ) return false; if( is_attr_binary( $server_id, $attr ) ) $vals = ldap_get_values_len( $conn, $entry, $attr ); else $vals = ldap_get_values( $conn, $entry, $attr ); unset( $vals['count'] ); return $vals; } /** * A handy ldap searching function very similar to PHP's ldap_search() with the * following exceptions: Callers may specify a search scope and the return value * is an array containing the search results rather than an LDAP result resource. * * Example usage: *
* $samba_users = ldap_search( 0, "(&(objcetClass=sambaAccount)(objectClass=posixAccount))",
* "ou=People,dc=example,dc=com", array( "uid", "homeDirectory" ) );
* print_r( $samba_users );
* // prints (for example):
* // Array
* // (
* // [uid=jsmith,ou=People,dc=example,dc=com] => Array
* // (
* // [dn] => "uid=jsmith,ou=People,dc=example,dc=com"
* // [uid] => "jsmith"
* // [homeDirectory] => "\\server\jsmith"
* // )
* // [uid=byoung,ou=People,dc=example,dc=com] => Array
* // (
* // [dn] => "uid=byoung,ou=Samba,ou=People,dc=example,dc=com"
* // [uid] => "byoung"
* // [homeDirectory] => "\\server\byoung"
* // )
* // )
*
*
* WARNING: This function will use a lot of memory on large searches since the entire result set is
* stored in a single array. For large searches, you should consider sing the less memory intensive
* PHP LDAP API directly (ldap_search(), ldap_next_entry(), ldap_next_attribute(), etc).
*
* @param int $server_id The ID of the server to search on.
* @param string $filter The LDAP filter to use when searching (example: "(objectClass=*)") (see RFC 2254)
* @param string $base_dn The DN of the base of search.
* @param array $attrs An array of attributes to include in the search result (example: array( "objectClass", "uid", "sn" )).
* @param string $scope The LDAP search scope. Must be one of "base", "one", or "sub". Standard LDAP search scope.
* @param bool $sort_results Specify false to not sort results by DN or true to have the
* returned array sorted by DN (uses ksort)
* @param int $deref When handling aliases or referrals, this specifies whether to follow referrals. Must be one of
* LDAP_DEREF_ALWAYS, LDAP_DEREF_NEVER, LDAP_DEREF_SEARCHING, or LDAP_DEREF_FINDING. See the PHP LDAP API for details.
*/
function pla_ldap_search( $server_id, $filter, $base_dn=null, $attrs=array(), $scope='sub', $sort_results=true, $deref=LDAP_DEREF_ALWAYS )
{
global $servers;
if( ! check_server_id( $server_id ) )
return false;
if( $base_dn == null )
$base_dn = $servers[$server_id]['base'];
$ds = pla_ldap_connect( $server_id );
if( ! $ds )
return false;
switch( $scope ) {
case 'base':
$search = @ldap_read( $ds, $base_dn, $filter, $attrs, 0, 0, 0, $deref );
break;
case 'one':
$search = @ldap_list( $ds, $base_dn, $filter, $attrs, 0, 0, 0, $defef );
break;
case 'sub':
default:
$search = @ldap_search( $ds, $base_dn, $filter, $attrs, 0, 0, 0, $deref );
break;
}
if( ! $search )
return array();
$return = array();
//get the first entry identifier
if( $entry_id = ldap_first_entry($ds,$search) )
//iterate over the entries
while($entry_id) {
//get the distinguished name of the entry
$dn = ldap_get_dn($ds,$entry_id);
//get the attributes of the entry
$attrs = ldap_get_attributes($ds,$entry_id);
$return[$dn]['dn'] = $dn;
//get the first attribute of the entry
if($attr = ldap_first_attribute($ds,$entry_id,$attrs))
//iterate over the attributes
while($attr){
if( is_attr_binary($server_id,$attr))
$values = ldap_get_values_len($ds,$entry_id,$attr);
else
$values = ldap_get_values($ds,$entry_id,$attr);
//get the number of values for this attribute
$count = $values['count'];
unset($values['count']);
if($count==1)
$return[$dn][$attr] = $values[0];
else
$return[$dn][$attr] = $values;
$attr = ldap_next_attribute($ds,$entry_id,$attrs);
}// end while attr
$entry_id = ldap_next_entry($ds,$entry_id);
} // end while entry_id
if( $sort_results && is_array( $return ) )
ksort( $return );
return $return;
}
/**
* Reads the query, checks all values and sets defaults.
*
* @param int $query_id The ID of the predefined query.
*
* @return array The fixed query or null on error
*/
function get_fixed_query($query_id)
{
global $queries;
if( ! isset( $queries[$query_id] ) )
return null;
$query = $queries[$query_id];
if( isset( $query['server'] ) && ( is_numeric( $query['server'] ) ) )
$server_id = $query['server'];
else $server_id = 0;
$base = ( isset( $query['base'] ) ) ? $query['base'] : null;
$base = expand_dn_with_base( $server_id, $base );
if( isset( $query['filter'] ) && strlen( trim( $query['filter'] ) ) > 0 )
$filter = $query['filter'];
else $filter = 'objectclass=*';
$scope = isset( $query['scope'] )
&& ( in_array( $query['scope'], array( 'base', 'sub', 'one' ) ) )
? $query['scope'] : 'sub';
if( isset( $query['attributes'] ) && strlen( trim( $query['filter'] ) ) > 0 )
$attrib = $query['attributes'];
else $attrib = "dn, cn";
return array ( 'server' => $server_id, 'base' => $base,
'filter' => $filter, 'scope' => $scope, 'attributes' => $attrib );
}
/**
* Transforms the user-configured search lists into arrays for use by other components of phpLDAPadmin.
* This may seem a little strange, and that's because it is strange.
*
* The function takes the comma-separated lists (like the search result attribute list) in config.php
* and turns them into arrays. Only call this ONCE per script. Any subsequent call will
* mess up the arrays. This function operates on global variables defined in config.php and is currently
* only used by search_form_simple.php
*
* For more details, just read the function's code. It's short and pretty straightforward.
*/
function process_config()
{
global $search_result_attributes;
$search_result_attributes = explode( ",", $search_result_attributes );
array_walk( $search_result_attributes, "trim_it" );
global $search_attributes_display;
$search_attributes_display = explode( ",", $search_attributes_display );
array_walk( $search_attributes_display, "trim_it" );
global $search_attributes;
$search_attributes= explode( ",", $search_attributes);
array_walk( $search_attributes, "trim_it" );
}
/**
* Trim a string in place (call by reference) Used to filter empty entries out of the arrays
* that we generate in process_config().
*/
function trim_it( &$str )
{
$str = trim($str);
}
/**
* Checks the specified server id for sanity. Ensures that the server is indeed in the configured
* list and active. This is used by many many scripts to ensure that valid server ID values
* are passed in POST and GET.
*/
function check_server_id( $server_id )
{
global $servers;
if( ! is_numeric( $server_id ) || ! isset( $servers[$server_id] ) || ! isset( $servers[$server_id]['host'] ) || $servers[$server_id]['host'] == '' )
return false;
else
return true;
}
/**
* Used to generate a random salt for crypt-style passwords. Salt strings are used
* to make pre-built hash cracking dictionaries difficult to use as the hash algorithm uses
* not only the user's password but also a randomly generated string. The string is
* stored as the first N characters of the hash for reference of hashing algorithms later.
*
* --- added 20021125 by bayu irawan  |
'; } if( $ldap_err_no != -1 ) { $ldap_err_no = ( '0x' . str_pad( dechex( $ldap_err_no ), 2, 0, STR_PAD_LEFT ) ); $verbose_error = pla_verbose_error( $ldap_err_no ); if( $verbose_error ) { echo sprintf( $lang['ferror_number'], $ldap_err_no, $verbose_error['title']); echo ' '; echo sprintf( $lang['ferror_discription'], $verbose_error['desc']); } else { echo sprintf($lang['ferror_number_short'], $ldap_err_no); echo ' '; echo $lang['ferror_discription_short']; } } ?> |
* draw_jpeg_photos( 0, "cn=Bob,ou=People,dc=example,dc=com", "jpegPhoto" true, false, "border: 1px; width: 150px" );
* draw_jpeg_photos( 1, "cn=Fred,ou=People,dc=example,dc=com" );
*
*
* @param int $server_id The ID of the server of interest.
* @param string $dn The DN of the entry that contains the jpeg attribute you want to draw.
* @param string $attr_name The name of the attribute containing the jpeg data (usually 'jpegPhoto').
* @param bool $draw_delete_buttons If true, draws a button beneath the image titled 'Delete' allowing the user
* to delete the jpeg attribute by calling JavaScript function deleteAttribute() provided
* in the default modification template.
* @param bool $draw_bytes_and_size If true, draw text below the image indicating the byte size and dimensions.
* @param string $table_html_attrs Specifies optional CSS style attributes for the table tag.
*
* @return void
*/
function draw_jpeg_photos( $server_id, $dn, $attr_name='jpegPhoto', $draw_delete_buttons=false,
$draw_bytes_and_size=true, $table_html_attrs='align="right"')
{
global $jpeg_temp_dir;
global $jpeg_tmp_keep_time;
global $lang;
$conn = pla_ldap_connect( $server_id );
$search_result = ldap_read( $conn, $dn, 'objectClass=*', array( $attr_name ) );
$entry = ldap_first_entry( $conn, $search_result );
echo "\n"; if( $draw_bytes_and_size ) { echo "" . number_format($jpeg_data_size) . " bytes. "; echo "$width x $height pixels. \n\n"; } if( $draw_delete_buttons ) { ?> Delete Photo |
![](\"images/find.png\")
";
if( $include_choose_text )
echo "". $lang['fbrowse'] ."";
echo "
* Array
* (
* [0] => uid=ppratt
* [1] => ou=People
* [2] => dc=example
* [3] => dc=com
* )
*
*/
function pla_explode_dn( $dn, $with_attributes=0 )
{
// replace "\," with the hexadecimal value for safe split
$var = preg_replace("/\\\,/","\\\\\\\\2C",$dn);
// split the dn
$result = explode(",",$var);
//translate hex code into ascii for display
foreach( $result as $key => $value )
$result[$key] = preg_replace("/\\\([0-9A-Fa-f]{2})/e", "''.chr(hexdec('\\1')).''", $value);
return $result;
}
/**
* Fetches the URL for the specified item. This is a convenience function for
* fetching project HREFs (like bugs)
*
* @param string $type One of "open_bugs", "add_bug", "open_rfes"
* (rfe = request for enhancement), or "add_rfe".
* @return string The URL to the requested item.
*/
function get_href( $type )
{
$group_id = "61828";
$bug_atid = "498546";
$rfe_atid = "498549";
switch( $type ) {
case 'open_bugs': return "http://sourceforge.net/tracker/?group_id=$group_id&atid=$bug_atid";
case 'add_bug': return "http://sourceforge.net/tracker/?func=add&group_id=$group_id&atid=$bug_atid";
case 'open_rfes': return "http://sourceforge.net/tracker/?atid=$rfe_atid&group_id=$group_id&func=browse";
case 'add_rfe': return "http://sourceforge.net/tracker/?func=add&group_id=$group_id&atid=$rfe_atid";
case 'donate': return "https://sourceforge.net/donate/index.php?group_id=$group_id";
default: return null;
}
}
/**
* Returns the current time as a double (including micro-seconds).
*
* @return double The current time in seconds since the beginning of the UNIX epoch (Midnight Jan. 1, 1970)
*/
function utime ()
{
$time = explode( " ", microtime());
$usec = (double)$time[0];
$sec = (double)$time[1];
return $sec + $usec;
}
/**
* Converts an array to a query-string with the option to exclude certain variables
* from the returned query string. This is convenient if callers want to convert the
* current GET query string or POST array into a string and replace certain
* variables with their own.
*
* @param array $array The associate array to convert whose form is such that the keys are the
* names of the variables and the values are said variables' values like this:
*
* Array
* (
* [server_id] = 0,
* [dn] = "dc=example,dc=com",
* [attr] = "sn"
* )
*
* This will produce a string like this: "server_id=0&dn=dc=example,dc=com&attr=sn"
* @param array $exclude_vars (optional) An array of variables to exclude in the resulting string
* @param bool $url_encode_ampersands (optional) By default, this function encodes all ampersand-separators
* as & but callers may dislabe this by specifying false here. For example, URLs on HTML
* pages should encode the ampersands but URLs in header( "Location: http://example.com" ) should
* not be encoded.
* @return string The string created from the array.
*/
function array_to_query_string( $array, $exclude_vars=array(), $url_encode_ampersands=true )
{
if( ! is_array( $array ) )
return '';
if( ! $array )
return '';
$str = '';
$i=0;
foreach( $array as $name => $val ) {
if( ! in_array( $name, $exclude_vars ) ) {
if( $i>0 )
if( $url_encode_ampersands )
$str .= '&';
else
$str .= '&';
$str .= urlencode( $name ) . '=' . urlencode( $val );
$i++;
}
}
return $str;
}
/**
* Gets whether the admin has configured phpLDAPadmin to show the "Create New" link in the tree viewer.
* If $servers[$server_id]['show_create'] is NOT set, then default to show the Create New item.
* If $servers[$server_id]['show_create'] IS set, then return the value (it should be true or false).
*
* @param int $server_id The ID of the server of interest
* @return bool True if the feature is enabled and false otherwise.
*/
function show_create_enabled( $server_id )
{
global $servers;
if( isset( $servers[$server_id]['show_create'] ))
return $servers[$server_id]['show_create'];
else
return true;
}
/**
* Reverses a DN such that the top-level RDN is first and the bottom-level RDN is last
* For example:
*
* cn=Brigham,ou=People,dc=example,dc=com
*
* Becomes:
*
* dc=com,dc=example,ou=People,cn=Brigham
*
* This makes it possible to sort lists of DNs such that they are grouped by container.
*
* @param string $dn The DN to reverse
*
* @return string The reversed DN
*
* @see pla_compare_dns
*/
function pla_reverse_dn($dn)
{
foreach (pla_explode_dn($dn) as $key => $branch) {
// pla_expode_dn returns the array with an extra count attribute, we can ignore that.
if ( $key === "count" ) continue;
if (isset($rev)) {
$rev = $branch.",".$rev;
} else {
$rev = $branch;
}
}
return $rev;
}
/**
* Strips all slashes from the specified array in place (pass by ref).
* @param Array $array The array to strip slashes from, typically one of
* $_GET, $_POST, or $_COOKIE.
*/
function array_stripslashes(&$array)
{
if( is_array( $array ) )
while ( list( $key ) = each( $array ) )
if ( is_array( $array[$key] ) && $key != $array )
array_stripslashes( $array[$key] );
else
$array[$key] = stripslashes( $array[$key] );
}
?>